Issue 6/2023
Content (41 Articles)
Standardisation efforts of ISO/TC 261 “additive manufacturing” 21st plenary meeting of ISO/TC 261 “additive manufacturing”
Eujin Pei, Christian Seidel
Standardisation efforts of ISO/TC 261 “additive manufacturing” 22nd plenary meeting of ISO/TC 261 “additive manufacturing”
Eujin Pei, Marius Lakomiec
Investigating the effect of process parameters for fused filament fabrication
Asma Boumedine, Samir Lecheb, Khaled Benfriha, Pascal Omnes
Vapour polishing of fused deposition modelling (FDM) parts: a critical review of different techniques, and subsequent surface finish and mechanical properties of the post-processed 3D-printed parts
Amal Mathew, S. Ram Kishore, Anchil Tona Tomy, M. Sugavaneswaran, Steffen G. Scholz, Ahmed Elkaseer, Vincent H. Wilson, A. John Rajan
The opportunities of additive manufacturing in the creative industries: a bibliometric analysis
Oluwayemisi Adebola Abisuga, Deon de Beer
Mechanical investigations on secondary recycled ABS-based composite multi-layered tensile and flexural specimens prepared by fused filament fabrication
Kapil Chawla, Jaspreet Singh, Rupinder Singh
Feasibility of using bio-mimicking fish scale textures in LPBF for water drag-reducing surfaces
Alessandro Scarpellini, Paolo Schito, Ali Gökhan Demir
Additive manufacturing for the automotive industry: on the life-cycle environmental implications of material substitution and lightweighting through re-design
Paolo C. Priarone, Angioletta R. Catalano, Luca Settineri
Hybrid laser metal deposition of a Fe–Cr–Mo–V–Mn tool steel for hot stamping applications
Tobia Romano, Marawan Abdelwahed, Sven Bengtsson, Francesco Bruzzo, Riccardo Casati, Hans Gedda, Elena López, Petter Ulfberg, Christoph Wilsnack, Maurizio Vedani
Large-format additive manufacturing of polymer extrusion-based deposition systems: review and applications
Carlos M. S. Vicente, Manuel Sardinha, Luís Reis, António Ribeiro, Marco Leite
Investigation into the influence of boronizing on the wear behavior of additively manufactured Inconel 625 alloy at elevated temperature
A. Günen, U. Gürol, M. Koçak, G. Çam
Breakthrough to the pragmatic evolution of direct ink writing: progression, challenges, and future
Komal Sandeep Pandya, Sarang Subhashchandra Shindalkar, Balasubramanian Kandasubramanian
Fatigue life assessment of wire arc additively manufactured ER100S-1 steel parts
Anna Ermakova, Nima Razavi, Rocco Crescenzo, Filippo Berto, Ali Mehmanparast
The enhancement of mechanical properties via post-heat treatments of AISI 630 parts printed with material extrusion
Mattia Carminati, Gianluca D’Urso, Claudio Giardini
Accuracy evaluation of thin wall features fabricated by fused deposition modeling using reinforced composite materials
Siti Nur Humaira Mazlan, Aini Zuhra Abdul Kadir, Mohd Rizal Alkahari, Tan Ken Land
Effect of post-heat treatment on microstructure and tribological performance of AISI 410L coatings processed by laser-directed energy deposition (L-DED)
Vitor H. Meura, Jeferson T. Pacheco, Marcelo T. Veiga, Alexsandro Rabelo, Leandro J. da Silva, Júlio C. Milan, César E. da Costa
Effect of varying unit cell size on energy absorption behaviour of additive manufactured TPMS PETG lattice structure
N. Sathishkumar, N. Arunkumar, S. V. Rohith, R. Rohit Hariharan
Construction 3D printing: a critical review and future research directions
Akerke Baigarina, Essam Shehab, Md. Hazrat Ali
Incorporation of silver nanoparticles into polyamide powder for application in 3D printing
João Vitor Gonçalves de Faria, Lauany Mazzon Pontes, Camila Colombari Bomfim, Katia Jorge Ciuffi, Lucas Alonso Rocha, Eduardo José Nassar, Jorge Vicente Lopes da Silva, Marcelo Fernandes de Oliveira, Izaque Alves Maia
Review of internal and external surface finishing technologies for additively manufactured metallic alloys components and new frontiers
Wondwosen Demisse, Jiajun Xu, Lucas Rice, Pawan Tyagi
Concurrent optimization of surface roughness, build time, and mechanical properties of additively manufactured product in terms of part build orientation
Irana Darvishi, Saeed Khodaygan, Kaivan Mohammadi, Amirhossein Golmohammadi
Effects of post-printing heat treatment on microstructure, corrosion and wet wear behavior of CoCrW alloy produced by L-PBF process
A. Lanzutti, F. Andreatta, E. Vaglio, M. Sortino, G. Totis, L. Fedrizzi
Laser beam heat treatment in large-scale additive manufacturing
Michel Layher, Lukas Eckhardt, Daniel Linke, Andreas Hopf, Jens Bliedtner
Application of interlaminar shear strength and finite element modeling for failure analysis of 3D printed continuous fiber-reinforced composites
Yu-Chao Shih, Mahmoud Mohamed, Jun Ge, Subhayu Sen, Selvum Pillay, Haibin Ning
Review of state-of-the-art research on the design and manufacturing of support structures for powder-bed fusion additive manufacturing
H. R. Javidrad, F. Javidrad
Development of high specific strength acrylonitrile styrene acrylate (ASA) structure using fused filament fabrication
Rupam Rakshit, Paramasivan Kalvettukaran, Sanjib Kumar Acharyya, Subhash Chandra Panja, Dipten Misra
Direct 3D printing of a two-part silicone resin to fabricate highly stretchable structures
Saleh Gharaie, Ali Zolfagharian, Amir Ali Amiri Moghadam, Nurul Shukur, Mahdi Bodaghi, Bobak Mosadegh, Abbas Kouzani
Effect of particle shape on rheology and printability of highly filled reactive inks for direct ink writing
Andrew House, Anna Kuna, Daniel Hastings, Nikki Rodriguez, Mirko Schoenitz, Edward L. Dreizin, Murat Guvendiren
Review of additive manufacturing with 2D MXene: techniques, applications, and future perspectives
Terek Li, Elahe Jabari, Kyra McLellan, Hani E. Naguib
Geometric characterization of orthogonally printed layers in material extrusion additive manufacturing: numerical modeling and experiments
Sina Jafarzadeh, Raphaël Comminal, Marcin P. Serdeczny, Mohamad Bayat, Christian R. H. Bahl, Jon Spangenberg
Support-free laser-based powder bed fusion of metals using pulsed exposure strategies
Jonas Grünewald, Jonas Reinelt, Holger Sedlak, Katrin Wudy
Effects of powder properties on the 3D printing of BaTiO3 ceramic resins by stereolithography
Elena Stefan, Terje Didriksen, Tor Olav Sunde, Marie-Laure Fontaine, Henrik Ræder, Per Martin Rørvik
Experimental and numerical investigations on the fatigue characteristics of FFF-printed acrylonitrile styrene acrylate parts
A. Captan Prabakaran, P. Senthil, T. Sathies
Layered fiber orientation optimization for continuous fiber reinforced polymer additive manufacturing using multi-material topology optimization
Cameron Forward, Il Yong Kim
New method to utilize STEP-NC data interface model for 3D printing
Kamran Latif, Yusri Yusof, Aini Zuhra Abdul Kadir
Transition mechanism of melt depth in vacuum during laser powder bed fusion using in-situ X-ray and thermal imaging
Tomoya Ogura, Yuki Wakai, Shizuka Nakano, Naoko Sato, Satoshi Kajino, Shinsuke Suzuki
Design and mathematical modeling of polymeric phases to obtain controlled microporosity materials by 3D printing
Marco A. Morales, Sinhue Ruiz-Salgado, Ricardo Agustín-Serrano, Benito Zenteno-Mateo, José I. Rodríguez-Mora
Publisher Correction: Additive manufacturing for biomedical applications: a review on classification, energy consumption, and its appreciable role since COVID-19 pandemic
Mudassar Rehman, Wang Yanen, Ray Tahir Mushtaq, Kashif Ishfaq, Sadaf Zahoor, Ammar Ahmed, M. Saravana Kumar, Thierno Gueyee, Md Mazedur Rahman, Jakia Sultana
Correction: Investigating the effect of process parameters for fused filament fabrication
Asma Boumedine, Samir Lecheb, Khaled Benfriha, Pascal Omnes
Publisher Correction: Effect of varying unit cell size on energy absorption behaviour of additive manufactured TPMS PETG lattice structure
N. Sathishkumar, N. Arunkumar, S. V. Rohith, R. Rohit Hariharan