Issue 4/2023
Advanced Computational Engineering and Experimenting. Selected papers from the conference
Content (9 Articles)
Open Access
Editorial
Advanced computational engineering and experimenting
Leonhard Hitzler, Markus Merkel
Full Research Article
Hand prosthesis prototype construction with the implementation of phalanges through 3D printing technology
Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, Christian Díaz-León, Francisco Javier Gallegos-Funes, Jacobo Martínez-Reyes, Juan Antonio Vargas-Bustos, Guillermo Urriolagoitia-Calderón
Open Access
Full Research Article
The influence of printing parameters on the mechanical properties of 3D printed TPU-based elastomers
V. M. Bruère, A. Lion, J. Holtmannspötter, M. Johlitz
Full Research Article
Influence of 3D printing properties on relative dielectric constant in PLA and ABS materials
Ivica Kuzmanić, Igor Vujović, Miro Petković, Joško Šoda
Open Access
Full Research Article
Joining technology of additively manufactured components: effects on the bonding strength for the adhesive application through inner channels
Michael Ascher, Stefan Brenner, Genny A. Pang, Ralf Späth
Open Access
Full Research Article
Surface morphology influences of PBF-LB manufactured Ti6Al4V parts on adhesive bond strength—investigation of as-built and surface-treated conditions
Emre Ertürk, Bruno Musil, Gregor Diez, Christian Felber, Philipp Höfer
Open Access
Full Research Article
Monotonic crack propagation in a notched polymer matrix composite reinforced with continuous fiber and printed by material extrusion
Jorge Guillermo Díaz-Rodríguez, Alberto David Pertúz-Comas, Caleb Josué Ariza González, Daniel David Garcia López, William Pinto Hernández
Open Access
Full Research Article
Forced-response characterization of PBF-LB/AlSi10Mg particle dampers with thin and flat cavities
Julius Westbeld, Fabio von Coburg, Philipp Höfer
Open Access
Full Research Article
Recoater crashes during powder bed fusion of metal with laser beam: simulative prediction of interference and experimental evaluation of resulting part quality
Stefan Brenner, Martin Moser, Lea Strauß, Vesna Nedeljkovic-Groha, Günther Löwisch