Swipe to navigate through the articles of this issue
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 24 – 32, February, 2016.
The structure, dynamic crack resistance, strength and micromechanisms of crack growth are studied in tubular billets from steel 35Kh after different variants of deformation and heat treatment including cold plastic deformation by radial forging followed by annealing. The radial forging with subsequent post-deformation annealing is shown to affect positively the strength and the dynamic crack resistance of the metal. Quantitative analysis of the micromechanism of crack growth is made after tests for dynamic crack resistance. Special features of the formation of macro-splits are determined.
Please log in to get access to this content
To get access to this content you need the following product:
G. V. Kurdyumov, L. M. Utevskii, and R. I. Éntin, Transformations in Iron and Steel [in Russian], Nauka, Moscow (1977), 236 p.
R. Z. Valiev, A. V. Korznikov, and R. R. Mulyukov, “Structure and properties of ultrafine-grained materials produced by severe plastic deformation,” Mater. Sci. Eng., A186, 141 – 148 (1993). CrossRef
G. A. Salishchev, O. R. Valiakhmetov, R. M. Galeev, and S. P. Malysheva, “Formation of submicrocrystalline structure in titanium under plastic deformation and its effect on mechanical properties,” Metally, No. 4, 86 – 91 (1996).
A. M. Glezer and L. S. Metlov, “Microplastic deformation of solids,” Fiz. Tekh. Vysok. Davl., 18(4), 21 – 36 (2008).
L. Ts. Zayats, D. O. Panov, and Yu. N. Simonov, “Refinement of the structure of steels under the conditions of intense thermal impact. Part 1. Choice of optimum alloying system,” Metalloved. Term. Obrab. Met., No. 11, 13 – 19 (2010).
A. M. Glezer, “Plastic deformation of nanocrystalline materials,” Izv. Vysh. Ucheb. Zaved., Chern. Metall., No. 2, 39 – 43 (2006).
E. G. Astafurova, S. V. Dobatkin, E. V. Naidenkin, et al., “Structural and phase transformations in nanostructured steel 10G2FT during cold torsional deformation under pressure and subsequent heating,” Ross. Nanotekhnol., 4(1 – 2), 162 – 174 (2009).
A. N. Balakhnin, D. O. Panov, M. G. Titova, et al., “Effect of cold plastic deformation by radial forging and subsequent heat treatment on the structure and properties of steel 10Kh3G3MF,” Metalloved. Term. Obrab. Met., No. 11, 22 – 27 (2012).
D. O. Panov, A. N. Balakhnin, A. S. Pertsev, et al., “Refinement of quenched low-carbon steel under cold plastic deformation and subsequent intense heat treatment,” Izv. Vysh. Ucheb. Zaved., Chern. Metall., No. 9, 57 – 61 (2013).
A. S. Pertsev, D. O. Panov, A. I. Smirnov, and Yu. N. Simonov, “Thermomechanical treatment of low-carbon structural steel 09G2S,” Sovr. Probl. Nauki Obraz., No. 6 (2013).
Yu. N. Simonov, A. P. Nishta, S. S. Yugay, and A. S. Pertsev, “Refinement of the structure of steel 35Kh up to the nanolevel with the aim of creation of materials for high-pressure vessels,” Metalloved. Term. Obrab. Met., No. 11, 7 – 12 (2010).
A. S. Pertsev, D. O. Popov, A. P. Nishta, et al., “Formation of a set of elevated mechanical characteristics in tubular billets from steel 20 by the method of thermochemical impact,” Obrab. Met., Tekhol., Oborud., Mater., No. 1, 75 – 79 (2013).
A. S. Pertsev, Yu. N. Simonov, A. V. Kasatkin, and A. D. Bukhalov, “Formation of elevated mechanical characteristics in commercial billets from steel 35Kh by thermomechanical impact,” Metalloved. Term. Obrab. Met., No. 11, 11 – 17 (2012).
O. K. Dedyulina and G. A. Salishchev, “Formation of ultrafinegrained structure in medium-carbon steel 40KhGNM by rotational forging and its effect on the mechanical properties,” Fundam. Issled., Tekh. Nauki, No. 1, 701 – 706 (2013).
V. A. Tyurin, V. A. Lazorkin, I. A. Pospelov, et al., Forging in Radial Compression Machines [in Russian], Mashinostroenie, Moscow (1990), 256 p.
Yu. S. Radchenko, Rotational Compression [in Russian], Mashinostroenie, Moscow (1972), 176 p.
M. I. Georgiev, Yu. N. Simonov, and M. Yu. Simonov, “Effect of crack length and side notches on implementation of plane strain conditions under impact loading,” Zavod. Lab., Diagn. Mater., 76(9), 56 – 58 (2010).
M. Yu. Simonov, Yu. N. Simonov, A. M. Khanov, and G. S. Shaimanov, “Structure, dynamic crack resistance and fracture mechanisms of quenched and tempered structural steels,” Metalloved. Term. Obrab Met., No. 11, 32 – 39 (2012).
Yu. N. Simonov, M. Yu. Simonov, D. O. Panov, A. V. Kasatkin, and D. P. Poduzov, “A method for estimating the impact toughness of high-toughness sheet structural steels, RF Patent 2485476, MPK G 01 No. 3/30,” Byull. Izobr. Polezn. Modeli, No. 17 (2013), appl. 10.01.2012, publ. 20.06.2013.
A. S. Pertsev, D. O. Panov, Yu. N. Simonov, and A. I. Smirnov, “Formation of structure and mechanical properties of structural steel under cold plastic deformation by radial forging,” Obrab. Met., Tekhnol., Oborud., Instr., No. 1, 32 – 38 (2014).
V. M. Farber, V. A. Khayutin, A. N. Morozova, and N. V. Lezhnin, “Diagnostics of fractures and energy intensity of failure of high-toughness steels under instrumental tests for impact bending,” Metalloved. Term. Obrab. Met., No. 6, 22 – 25 (2015).
M. Yu. Simonov, M. N. Georgiev, G. S. Shaimiev, et al., “Comparative analysis of zones of plastic strain, dynamic crack resistance, structure and micromechanisms of crack propagation in steels 09G2S, 25 and 40 in high-toughness condition,” Metalloved. Term. Obrab. Met., No. 2, 39 – 48 (2016).
- Effect of Structure on the Dynamic Crack Resistance and Special Features of the Micromechanism of Crack Growth in Steel 35Kh After Cold Radial Forging
M. Yu. Simonov
G. S. Shaimanov
A. S. Pertsev
Yu. N. Simonov
A. N. Knyazeva
K. A. Shibanova
A. I. Smirnov
- Publication date
- Springer US
in-adhesives, MKVS, Zühlke/© Zühlke