Advertisement
Published in:
09-12-2015
Effect of substrate temperature on properties of Cu(In, Ga, Al)Se2 films grown by magnetron sputtering
Published in: Journal of Materials Science: Materials in Electronics | Issue 4/2016
Log inActivate our intelligent search to find suitable subject content or patents.
Select sections of text to find matching patents with Artificial Intelligence. powered by
Select sections of text to find additional relevant content using AI-assisted search. powered by
Abstract
Cu(In, Ga, Al)Se2 (CIGAS) thin films were deposited by magnetron sputtering on Si(100) and soda-lime glass substrates at different substrate temperatures, followed by post-deposition annealing at 350 or 520 °C for 5 h in vacuum. Electron probe micro-analysis and secondary ion mass spectroscopy were used to determine the composition of the films and the distribution of Al across the film thickness, respectively. X-ray diffraction analysis showed that the (112) peak of CIGAS films shifts to higher 2θ values with increasing substrate temperature but remains unchanged when the films were annealed at 520 °C for 5 h. Scanning electron microscopy and atomic force microscopy images revealed dense and well-defined grains for both as-deposited and annealed films. However, notable increase in grain size and roughness was observed for films deposited at 500 °C. The bandgap of CIGAS films was determined from the optical transmittance and reflectance spectra and was found to increase as the substrate temperature was increased.