Top

Polymer Bulletin

Published in:

01-12-2022 | ORIGINAL PAPER

Effects of SWCNT content on the electrospinning behavior and structure formation of a PVDF/SWCNT composite web

Authors: Jhwan Lim, Hansol Park, Sejin Choi, Han Seong Kim

Published in: Polymer Bulletin | Issue 10/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, the effect of the addition of conductive materials on the solution properties, electrospinning behavior, and electrospun web structure of polyvinylidene fluoride (PVDF) was investigated. A PVDF/single-walled carbon nanotube (SWCNT) composite was prepared by adding various amounts of SWCNT to a PVDF solution, and a PVDF/SWCNT web was produced by electrospinning. To fabricate a polymer solution complex with a conductive material, it is important to understand the change in electrospinning behavior according to the properties of the solution. The properties of the composite solution were analyzed with respect to the SWCNT ratio in the solution, and the real-time effects on electrospinning behavior were compared and analyzed. The electrospinning behavior considerably differed depending on the properties of the solution. In this study, SWCNT was added in the range of 0–0.02%, and as the SWCNT content increased, the collection area decreased by 25%, the fiber diameter increased from 1.69 ± 0.88 to 1.83 ± 1.22 μm, and the PVDF fiber β-phase content reduced by approximately 6%. The PVFD/SWCN spinning behavior difference analysis and structure formation change according to the SWCNT ratio are useful for controlling the diameter, collection area, and crystallinity in the fiber process of PVDF. They are also expected to be useful for controlling the electrospinning behavior and fiber formation of various polymer materials based on the addition of conductive materials.

previous article Use of Ricinus communis shredded material as filler in rotational molded parts to improve the bio-disintegration behavior

next article Fabrication and cytotoxicity evaluation of polyethyleneimine conjugated fluorescent MXene nanosheets as cancer theranostics agent

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Saxena P, Shukla P (2021) A comprehensive review on fundamental properties and applications of poly(vinylidene fluoride) (PVDF). Adv Compos Hybrid Mater 4:8–26. https://doi.org/10.1007/s42114-021-00217-0CrossRef

Sukumaran S, Chatbouri S, Rouxel D et al (2020) Recent advances in flexible PVDF based piezoelectric polymer devices for energy harvesting applications. J Intell Mater Syst Struct 32:746–780. https://doi.org/10.1177/1045389x20966058CrossRef

Pornea AM, Puguan JMC, Deonikar VG et al (2020) Fabrication of multifunctional wax infused porous PVDF film with switchable temperature response surface and anti corrosion property. J Ind Eng Chem 82:211–219. https://doi.org/10.1016/j.jiec.2019.10.015CrossRef

Barrau S, Ferri A, Da Costa A et al (2018) Nanoscale investigations of alpha- and gamma-crystal phases in PVDF-based nanocomposites. ACS Appl Mater Interfaces 10:13092–13099. https://doi.org/10.1021/acsami.8b02172CrossRefPubMed

Pickford T, Gu X, Heeley EL et al (2019) Effects of an ionic liquid and processing conditions on the β-polymorph crystal formation in poly(vinylidene fluoride). CrystEngComm 21:5418–5428. https://doi.org/10.1039/c9ce01051cCrossRef

Bairagi S, Ali SW (2019) A unique piezoelectric nanogenerator composed of melt-spun PVDF/KNN nanorod-based nanocomposite fibre. Eur Polym J 116:554–561. https://doi.org/10.1016/j.eurpolymj.2019.04.043CrossRef

Luo M, Luo H, Axinte D et al (2018) A wireless instrumented milling cutter system with embedded PVDF sensors. Mech Syst Signal Process 110:556–568. https://doi.org/10.1016/j.ymssp.2018.03.040CrossRef

Kalimuldina G, Turdakyn N, Abay I et al (2020) A review of piezoelectric PVDF film by electrospinning and its applications. Sensors (Basel). https://doi.org/10.3390/s20185214CrossRefPubMed

Sanyal A, Sinha-Ray S (2021) Ultrafine PVDF nanofibers for filtration of air-borne particulate matters: a comprehensive review. Polymers (Basel). https://doi.org/10.3390/polym13111864CrossRefPubMed

10.

Al Rai A, Stojanovska E, Fidan G et al (2020) Structure and performance of electroblown PVDF-based nanofibrous electret filters. Polym Eng Sci 60:1186–1193. https://doi.org/10.1002/pen.25372CrossRef

11.

Luiso S, Henry JJ, Pourdeyhimi B et al (2021) Meltblown polyvinylidene difluoride as a Li-ion battery separator. ACS Appl Polym Mater 3:3038–3048. https://doi.org/10.1021/acsapm.1c00221CrossRef

12.

Valverde A, Gonçalves R, Silva MM et al (2020) Metal–organic framework based PVDF separators for high rate cycling lithium-ion batteries. ACS Appl Energy Mater 3:11907–11919. https://doi.org/10.1021/acsaem.0c02044CrossRef

13.

Hall D (2001) Review nonlinearity in piezoelectric ceramics. J Mater Sci 36:4575–4601. https://doi.org/10.1023/A:1017959111402CrossRef

14.

Lim J, Kim HS (2021) Effects of SWCNT/PVDF composite web behavior on acoustic piezoelectric property. Sens Actuators A Phys. https://doi.org/10.1016/j.sna.2021.112840CrossRef

15.

Lee C, Tarbutton JA (2019) Polyvinylidene fluoride (PVDF) direct printing for sensors and actuators. Int J Adv Manuf Technol 104:3155–3162. https://doi.org/10.1007/s00170-019-04275-zCrossRef

16.

Ghosal K, Agatemor C, Špitálsky Z et al (2019) Electrospinning tissue engineering and wound dressing scaffolds from polymer-titanium dioxide nanocomposites. Chem Eng J 358:1262–1278. https://doi.org/10.1016/J.CEJ.2018.10.117CrossRef

17.

Altinkok C, Acik G, Daglar O et al (2022) A facile approach for the fabrication of antibacterial nanocomposites: a case study for AgNWs/poly(1,4-cyclohexanedimethylene acetylene dicarboxylate) composite networks by aza-Michael addition. Eur Polym J. https://doi.org/10.1016/j.eurpolymj.2022.111130CrossRef

18.

Armentano I, Puglia D, Luzi F et al (2018) Nanocomposites based on biodegradable polymers. Materials (Basel). https://doi.org/10.3390/ma11050795CrossRefPubMed

19.

Son WK, Youk JH, Park WH (2006) Antimicrobial cellulose acetate nanofibers containing silver nanoparticles. Carbohydr Polym 65:430–434. https://doi.org/10.1016/j.carbpol.2006.01.037CrossRef

20.

Choudhury A (2009) Polyaniline/silver nanocomposites: dielectric properties and ethanol vapour sensitivity. Sens Actuators B Chem 138:318–325. https://doi.org/10.1016/j.snb.2009.01.019CrossRef

21.

Acik G (2021) Fabrication of polypropylene fibers possessing quaternized ammonium salt based on the combination of CuAAC click chemistry and electrospinning. React Funct Polym. https://doi.org/10.1016/j.reactfunctpolym.2021.105035CrossRef

22.

Ruan L, Yao X, Chang Y et al (2018) Properties and applications of the beta phase poly(vinylidene fluoride). Polymers (Basel). https://doi.org/10.3390/polym10030228CrossRefPubMed

23.

Gade H, Nikam S, Chase GG et al (2021) Effect of electrospinning conditions on β-phase and surface charge potential of PVDF fibers. Polymer. https://doi.org/10.1016/j.polymer.2021.123902CrossRef

24.

Zaarour B, Zhu L, Huang C et al (2019) Enhanced piezoelectric properties of randomly oriented and aligned electrospun PVDF fibers by regulating the surface morphology. J Appl Polym Sci. https://doi.org/10.1002/app.47049CrossRef

25.

Faraz M, Singh HH, Khare N (2022) A progressive strategy for harvesting mechanical energy using flexible PVDF-rGO-MoS2 nanocomposites film-based piezoelectric nanogenerator. J Alloys Compd. https://doi.org/10.1016/j.jallcom.2021.161840CrossRef

26.

Eun JH, Sung SM, Kim MS et al (2021) Effect of MWCNT content on the mechanical and piezoelectric properties of PVDF nanofibers. Mater Des. https://doi.org/10.1016/j.matdes.2021.109785CrossRef

27.

Anand S, Pauline S (2021) Electromagnetic interference shielding properties of BaCo2Fe16O27 nanoplatelets and RGO reinforced PVDF polymer composite flexible films. Adv Mater Interfaces 8:2001810. https://doi.org/10.1002/admi.202001810CrossRef

28.

Qi S, Craig D (2016) Recent developments in micro- and nanofabrication techniques for the preparation of amorphous pharmaceutical dosage forms. Adv Drug Deliv Rev 100:67–84. https://doi.org/10.1016/j.addr.2016.01.003CrossRefPubMed

29.

Yousefzade O, Katsarava R, Puiggali J (2020) Biomimetic hybrid systems for tissue engineering. Biomimetics (Basel). https://doi.org/10.3390/biomimetics5040049CrossRefPubMed

30.

Jang S, Song S, Lim JH et al (2020) Application of various metal–organic frameworks (MOFs) as catalysts for air and water pollution environmental remediation. Catalysts. https://doi.org/10.3390/catal10020195CrossRef

31.

Choi S, Kim HR, Jeong YK et al (2018) Mechanism of electrospinning for poly(amic acid)/polyacrylonitrile fiber fabrication. J Macromol Sci Part B 57:222–230. https://doi.org/10.1080/00222348.2018.1441221CrossRef

32.

Sorayani Bafqi MS, Bagherzadeh R, Latifi M (2015) Fabrication of composite PVDF-ZnO nanofiber mats by electrospinning for energy scavenging application with enhanced efficiency. J Polym Res. https://doi.org/10.1007/s10965-015-0765-8CrossRef

33.

Sharma M, Madras G, Bose S (2014) Process induced electroactive beta-polymorph in PVDF: effect on dielectric and ferroelectric properties. Phys Chem Chem Phys 16:14792–14799. https://doi.org/10.1039/c4cp01004cCrossRefPubMed

Title: Effects of SWCNT content on the electrospinning behavior and structure formation of a PVDF/SWCNT composite web
Authors: Jhwan Lim
Hansol Park
Sejin Choi
Han Seong Kim
Publication date: 01-12-2022
Publisher: Springer Berlin Heidelberg
Published in: Polymer Bulletin / Issue 10/2023
Print ISSN: 0170-0839
Electronic ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-022-04578-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2023

An ecologically sustainable specific method using new magnetic alginate-biochar from acorn cups (Quercus coccifera L.) for decolorization of dyes

Bioactive films for the control of skin pathogens with sophorolipids from Starmerella bombicola

Polymeric nanoparticles tryptophan-graft-p(HEMA): a study on synthesis, characterization, and toxicity

Polymeric organic–inorganic C3N4/ZnO high-performance material for visible light photodegradation of organic pollutants

On the evaluation of viscoelastic response of aged PLA/bagasse bio-composites

The incorporation of polypyrrole (PPy) in CS/PVA composite films to enhance the structural, optical, and the electrical conductivity

Premium Partners