Top

Journal of Materials Engineering and Performance

Published in:

12-04-2023 | Technical Article

Evaluation of Mechanical, Tribological, and Thermal Characterization of GZ TBCs for Heavy Duty Diesel Engine Application

Authors: Raja Velusamy, A. Suresh Babu, M. R. Swaminathan, P. Hariharan

Published in: Journal of Materials Engineering and Performance | Issue 6/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Environmental regulations governing heavy-duty diesel engines (HDDE) have become more stringent, mandating them to ensure a lower environmental and human health impact, with improved efficiency in terms of emissions and fuel economy. The focus of most of the researches is on advancement in thermodynamic cycles and maximum heat utilization techniques. Thermal barrier coating (TBCs) is one of the most efficient methods of increasing energy efficiency through effective utilization of heat by insulating the turbine and combustor engine components. The primary focus of this work, is on the effective material behaviour of TBCs on HDDE components in terms of mechanical, tribological and thermal characterization. Inlet and exhaust valve substrates were coated with Gadolinium Zirconate (GZ) with and without bond coat (NiCr) with a thickness of 100 and 150 µm respectively using the plasma spray technique. Reciprocative wear, thermal conductivity and expansion behavior of uncoated and coated substrates were carried out as per the ASTM Standards. The results indicated a reduction in co-efficient of friction in GZ/NiCr substrate by 15 and 3% in comparison with uncoated and GZ coated substrate respectively. Furthermore, the mean expansion value of GZ/NiCr substrate was 10.04% lower than the GZ coated substrate, substantiating the reduction in micro-crack formation as a result of combating the CTE mismatch between substrate and coating. Among the samples, GZ/NiCr substrate showed a maximum reduction in thermal conductivity accounting to 8 to 11%. These findings elaborate the capability of TBCs towards improving wear resistance and sustaining high temperature thermal exposure of combustion chamber components in HDDE.

previous article Microstructure Evolution and Hardness of Hypereutectic High Chromium Cast Iron after Tempering

next article Influence of Silicon Carbide and Graphite Reinforcements and T6 Aging Heat Treatment on the Fatigue Characteristics of AZ91D Magnesium Alloy

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

G. Latz, O. Erlandsson, T. Skåre, A. Contet, S. Andersson, and K. Munch, Performance Analysis of a Reciprocating Piston Expander and a Plate Type Exhaust Gas Recirculation Boiler in a Water-Based Rankine Cycle for Heat Recovery from a Heavy Duty Diesel Engine, Energies, 2016 https://doi.org/10.3390/en9070495CrossRef

O. Delgado, F. Rodriguez, and R. Muncrief, Fuel efficiency technology in european heavy-duty vehicles: baseline and potential for the 2020–2030 timeframe. Int. Counc. Clean Transp. 1–3 (2017). Available: www.theicct.org

J. O’connor et al., Optimization of an Advanced Combustion Strategy Towards 55% BTE for the Volvo SuperTruck Program, Int. J. Engines, 2017, 10(3), p 1217–1227. https://doi.org/10.2307/26285123CrossRef

R. Ghasemi and H. Vakilifard, Plasma-Sprayed Nanostructured YSZ Thermal Barrier Coatings: Thermal Insulation Capability and Adhesion Strength, Ceram. Int., 2017, 43(12), p 8556–8563. https://doi.org/10.1016/j.ceramint.2017.03.074CrossRef

B. Bernard et al., Thermal Insulation Properties of YSZ Coatings: Suspension Plasma Spraying (SPS) Versus Electron Beam Physical Vapor Deposition (EB-PVD) and Atmospheric Plasma Spraying (APS), Surf. Coat. Technol., 2017, 318, p 122–128. https://doi.org/10.1016/j.surfcoat.2016.06.010CrossRef

H.J. Rätzer-Scheibe and U. Schulz, The Effects of Heat Treatment and Gas Atmosphere on the Thermal Conductivity of APS and EB-PVD PYSZ Thermal Barrier Coatings, Surf. Coat. Technol., 2007, 201(18), p 7880–7888. https://doi.org/10.1016/j.surfcoat.2007.03.028CrossRef

P. Song, D. Naumenko, R. Vassen, L. Singheiser, and W.J. Quadakkers, Effect of Oxygen Content in NiCoCrAlY Bondcoat on the Lifetimes of EB-PVD and APS Thermal Barrier Coatings, Surf. Coat. Technol., 2013, 221, p 207–213. https://doi.org/10.1016/j.surfcoat.2013.01.054CrossRef

M. Movchan and Y. Rudoy, Composition, Structure and Properties of Gradient Thermal Barrier Coatings (TBCs) Produced by Electron Beam Physical Vapor Deposition (EB-PVD), Mater. Des., 1998, 19(5–6), p 253–258. https://doi.org/10.1016/s0261-3069(98)00020-xCrossRef

R. Velusamy et al., Effect of Single Layer Thin Film Thermal Barrier Coatings on Mechanical, Thermal and Tribological Characterization of Cast Iron (GJL 300), SAE Tech. Pap., 2021, 17323(2021), p 1–7. https://doi.org/10.4271/2021-28-0285CrossRef

10.

L. Łatka, Thermal Barrier Coatings Manufactured by Suspension Plasma Spraying - A Review, Adv. Mater. Sci., 2018, 18(3), p 95–117. https://doi.org/10.1515/adms-2017-0044CrossRef

11.

V. Bolleddu, V. Racherla, and P.P. Bandyopadhyay, Characterization of Air Plasma-Sprayed Yttria-Stabilized Zirconia Coatings Deposited with Nitrogen, Int. J. Adv. Manuf. Technol., 2017, 90(9–12), p 3437–3449. https://doi.org/10.1007/s00170-016-9613-1CrossRef

12.

V.K. Domakonda, P. Devendra Reddy, and S. Farooq, Effect of Lanthanum Zirconate Thermal Barrier Coating on the Performance and Emissions of a Diesel Engine Using Biodiesel, IOP Conf. Ser. Mater. Sci. Eng., 2019 https://doi.org/10.1088/1757-899X/577/1/012174CrossRef

13.

S. Kossman et al., Sliding Wear Response of Nanostructured YSZ Suspension Plasma-Sprayed Coating, J. Therm. Spray Technol., 2014, 23(8), p 1350–1361. https://doi.org/10.1007/s11666-014-0146-6CrossRef

14.

R.H.J. Hannink, P.M. Kelly, and B.C. Muddle, Transformation Toughening in Zirconia-Containing Ceramics, J. Am. Ceram. Soc., 2000, 83(3), p 461–487. https://doi.org/10.1111/j.1151-2916.2000.tb01221.xCrossRef

15.

C. Piconi and G. Maccauro, Zirconia as a Ceramic Biomaterial, Biomaterials, 1999, 20(1), p 1–25. https://doi.org/10.1016/S0142-9612(98)00010-6CrossRefPubMed

16.

H. Fang, W. Wang, J. Huang, Y. Li, and D. Ye, Corrosion Behavior and Thermos-Physical Properties of a Promising Yb2O3 and Y2O3 Co-stabilized ZrO2 Ceramic for Thermal Barrier Coatings Subject to Calcium-Magnesium-Aluminum-Silicate (CMAS) Deposition: Experiments and First-Principles Calculation, Corros. Sci., 2021, 182(September 2020), p 109230. https://doi.org/10.1016/j.corsci.2020.109230CrossRef

17.

T. Yang et al., Preparation and Thermophysical Properties of CeO2-Gd2O3 Costabilized Zirconia Thermal Barrier Coating, J. Therm. Spray Technol., 2020, 29(1–2), p 115–124. https://doi.org/10.1007/s11666-019-00971-0CrossRef

18.

R.A. Miller, Thermal Barrier Coatings for Aircraft Engines: History and Directions, J. Therm. Spray Technol., 1997, 6(1), p 35–42. https://doi.org/10.1007/BF02646310CrossRef

19.

R.L. Jones, R.F. Reidy, and D. Mess, Scandia, Yttria-Stabilized Zirconia for Thermal Barrier Coatings, Surf. Coat. Technol., 1996, 82(1–2), p 70–76. https://doi.org/10.1016/0257-8972(95)02646-0CrossRef

20.

J. Kim, Effect of Ta205, Nb205, and Hf02 Alloying on the Transformability of Y20s-Stabilized Tetragonal Z r 0 2 Due, J. Am. Cerom. Soc., 1990, 73(1), p 115–120.CrossRef

21.

D. Zhu and R.A. Miller, Sintering and Creep Behavior of Plasma-Sprayed Zirconia- and Hafnia-Based Thermal Barrier Coatings, Surf. Coat. Technol., 1998, 108–109(1–3), p 114–120. https://doi.org/10.1016/S0257-8972(98)00669-0CrossRef

22.

F.M. Pitek and C.G. Levi, Opportunities for TBCs in the ZrO2-YO1.5-TaO2.5 System, Surf. Coat. Technol., 2007, 201(12), p 6044–6050. https://doi.org/10.1016/j.surfcoat.2006.11.011CrossRef

23.

M. Gell, J. Wang, R. Kumar, J. Roth, C. Jiang, and E.H. Jordan, Higher Temperature Thermal Barrier Coatings with the Combined Use of Yttrium Aluminum Garnet and the Solution Precursor Plasma Spray Process, J. Therm. Spray Technol., 2018, 27(4), p 543–555. https://doi.org/10.1007/s11666-018-0701-7CrossRef

24.

H. Fang, W. Wang, J. Huang, and D. Ye, Investigation of CMAS Resistance of Sacrificial Plasma-Sprayed Mullite-YSZ Protective Layer on 8YSZ Thermal Barrier Coating, Corros. Sci., 2020, 173(130), p 108764. https://doi.org/10.1016/j.corsci.2020.108764CrossRef

25.

J.B. Huang et al., Improve Durability of Plasma-Splayed Thermal Barrier Coatings by Decreasing Sintering-Induced Stiffening in Ceramic Coatings, J. Eur. Ceram. Soc., 2020, 40(4), p 1433–1442. https://doi.org/10.1016/j.jeurceramsoc.2019.11.074CrossRef

26.

S. Sivakumar, K. Praveen, G. Shanmugavelayutham, S. Yugeswaran, and J. Mostaghimi, Thermo-Physical Behavior of Atmospheric Plasma Sprayed High Porosity Lanthanum Zirconate Coatings, Surf. Coat. Technol., 2017, 326, p 173–182. https://doi.org/10.1016/j.surfcoat.2017.07.054CrossRef

27.

S.M. Naga et al., Effect of La2Zr2O7 Coat on the Hot Corrosion of Multi-layer Thermal Barrier Coatings, Mater. Des., 2016, 102, p 1–7. https://doi.org/10.1016/j.matdes.2016.03.133CrossRef

28.

J. Zhang, X. Guo, Y.G. Jung, L. Li, and J. Knapp, Lanthanum Zirconate Based Thermal Barrier Coatings: A Review, Surf. Coat. Technol., 2017, 323, p 18–29. https://doi.org/10.1016/j.surfcoat.2016.10.019CrossRef

29.

S. Sivakumar, G. Shanmugavelayutham, S. Yugeswaran, and J. Mostaghimi, Influence of Water Vapour on Structural and thermal conductivity of post-heat treated plasma sprayed LZ and YSZ coatings, J. Alloys Compd., 2018, 740, p 212–221. https://doi.org/10.1016/j.jallcom.2018.01.056CrossRef

30.

Z. Xu et al., Double-Ceramic-Layer Thermal Barrier Coatings of La2Zr2O7/YSZ Deposited by Electron Beam-Physical Vapor Deposition, J. Alloys Compd., 2009, 473(1–2), p 509–515. https://doi.org/10.1016/j.jallcom.2008.06.064CrossRef

31.

Z. Shen, L. He, Z. Xu, R. Mu, and G. Huang, Rare Earth Oxides Stabilized La2Zr2O7 TBCs: EB-PVD, Thermal Conductivity and Thermal Cycling Life, Surf. Coat. Technol., 2019, 357(July 2018), p 427–432. https://doi.org/10.1016/j.surfcoat.2018.10.045CrossRef

32.

R. Velusamy et al., Tribological and Thermal Characterization of Electron Beam Physical Vapor Deposited Single Layer Thin Film for TBC Application, Surf. Topogr. Metrol. Prop., 2021, 9(2), p 25043. https://doi.org/10.1088/2051-672X/ac0c61CrossRef

33.

L. Wang, J.I. Eldridge, and S.M. Guo, Thermal Radiation Properties of Plasma-Sprayed Gd2Zr 2O7 Thermal Barrier Coatings, Scr. Mater., 2013, 69(9), p 674–677. https://doi.org/10.1016/j.scriptamat.2013.07.026CrossRef

34.

J.A. Krogstad et al., Phase Stability of t′-zirconia-Based Thermal Barrier Coatings: Mechanistic Insights, J. Am. Ceram. Soc., 2011, 94(SUPPL. 1), p s168–s177. https://doi.org/10.1111/j.1551-2916.2011.04531.xCrossRef

35.

Y. Feng, T.S. Dong, B.G. Fu, G.L. Li, Q. Liu, and R. Wang, Thermal Shock Resistance of Double-Layer Thermal Barrier Coatings, J. Mater. Res., 2020, 35(20), p 2808–2816. https://doi.org/10.1557/jmr.2020.228CrossRef

36.

Z. Yang, W. Wang, S. Deng, H. Fang, T. Yang, and L. Wang, Thermal Shock Behavior and Particle Erosion Resistance of Toughened GZ Coatings Prepared by Atmospheric Plasma Spraying, Coatings, 2021 https://doi.org/10.3390/coatings11121477CrossRef

37.

S. Mahade, A. Jahagirdar, X.H. Li, B. Kjellman, S. Björklund, and N. Markocsan, Tailoring Microstructure of Double-Layered Thermal Barrier Coatings Deposited by Suspension Plasma Spray for Enhanced Durability, Surf. Coat. Technol., 2021 https://doi.org/10.1016/j.surfcoat.2021.127704CrossRef

38.

K.M. Doleker and A.C. Karaoglanli, Comparison of Oxidation Behavior of YSZ and Gd2Zr2O7 Thermal Barrier Coatings (TBCs), Surf. Coat. Technol., 2017, 318, p 198–207. https://doi.org/10.1016/j.surfcoat.2016.12.078CrossRef

39.

M. GuvenGok and G. Goller, Production and Characterisation of GZ/CYSZ Alternative Thermal Barrier Coatings with Multilayered and Functionally Graded Designs, J. Eur. Ceram. Soc., 2016, 36(7), p 1755–1764. https://doi.org/10.1016/j.jeurceramsoc.2016.01.036CrossRef

40.

P. Carpio, M.D. Salvador, A. Borrell, and E. Sánchez, Thermal Behaviour of Multilayer and Functionally-Graded YSZ/Gd2Zr2O7 Coatings, Ceram. Int., 2017, 43(5), p 4048–4054. https://doi.org/10.1016/j.ceramint.2016.11.178CrossRef

41.

T. Mokhena, M. Mochane, M. Tshwafo, L. Linganiso, O. Thekisoe, and S. Songca, We are IntechOpen, the World’s Leading Publisher of Open Access Books Built by Scientists, for Scientists TOP 1%. (Intech, 2016), pp. 225–240, [Online]. Available: https://www.intechopen.com/books/advanced-biometric-technologies/liveness-detection-in-biometrics

42.

J. Zucchetto, P. Myers, J. Johnson, and D. Miller, An Assessment of the Performance and Requirements for ‘Adiabatic’ Engines, Science, 1988, 240(4856), p 1157–1162. https://doi.org/10.1126/science.240.4856.1157CrossRefPubMed

43.

R. Kamo and W. Bryzik, Adiabatic Turbocompound Engine Performance Prediction, SAE Tech. Pap., 1978, 87, p 213–223. https://doi.org/10.4271/780068CrossRef

44.

M. Panțuru, D. Chicet, Ș Lupescu, B. Istrate, and C. Munteanu, Applications of Ceramic Coatings as TBCs on the Internal Combustion Engine Valves, Appl. Math. Mech. Eng., 2018, 61(I), p 137–142.

45.

V. Guruprakash, N. Harivignesh, G. Karthick, and N. Bose, Thermal Barrier Coating on I.C Engine Cylinder Liner, Arch. Mater. Sci. Eng., 2016, 81(1), p 37–41. https://doi.org/10.5604/18972764.1229626CrossRef

46.

I. Taymaz, The Effect of Thermal Barrier Coatings on Diesel Engine Performance, Surf. Coat. Technol., 2007, 201(9–11), p 5249–5252. https://doi.org/10.1016/j.surfcoat.2006.07.123CrossRef

47.

V. Garud et al., Performance and CombustionCharacteristics of Thermal Barrier Coated (YSZ) Low Heat Rejection Diesel Engine, Mater. Today Proc., 2017, 4(2), p 188–194. https://doi.org/10.1016/j.matpr.2017.01.012CrossRef

48.

A. Thibblin, S. Kianzad, S. Jonsson, and U. Olofsson, Running-in Behaviour of Thermal Barrier Coatings in the Combustion Chamber of a Diesel Engine, Proc. Inst. Mech. Eng. Part D J. Automob. Eng., 2020, 234(1), p 172–182. https://doi.org/10.1177/0954407019841173CrossRef

49.

S.B. Patond, S.A. Chaple, P.N. Shrirao, and P.I. Shaikh, Comparative Study of Performance and Combustion Characteristics of Conventional and Low Heat Rejection (Mullite Coated) Diesel Engines, IOP Conf. Ser. Mater. Sci. Eng., 2013 https://doi.org/10.1088/1757-899X/46/1/012008CrossRef

50.

Y. Paik, C.R. Sahu, K.K. Pandey, S.K. Barik, S. Murugan, and D. Debasish, Effect of Thermal Barrier Coating on Performance and Emissions of a di Diesel Engine, SAE Tech. Pap., 2020 https://doi.org/10.13140/RG.2.2.16856.52481CrossRef

51.

P.V. Elumalai, K. Annamalai, and B. Dhinesh, Effects of Thermal Barrier Coating on the Performance, Combustion and Emission of DI Diesel Engine Powered by Biofuel Oil–Water Emulsion, J. Therm. Anal. Calorim., 2019, 137(2), p 593–605. https://doi.org/10.1007/s10973-018-7948-6CrossRef

52.

N. Ramasamy, M.A. Kalam, M. Varman, and Y.H. Teoh, Effect of Thermal Barrier Coating on the Performance and Emissions of Diesel Engine Operated with Conventional Diesel and Palm Oil Biodiesel, Coatings, 2021, 11(6), p 1–14. https://doi.org/10.3390/coatings11060692CrossRef

53.

A. Rohini, and S. Prema, A Review on Thermal Barrier Coating for Diesel Engine and Its Characteristics Studies, J. Phys. Conf. Ser., 2020 https://doi.org/10.1088/1742-6596/1473/1/012039CrossRef

54.

E.A. Majeed, H.K. Rashid, and M.K. Hussain, Review of Ceramic Materials that Used as a Thermal Barrier in Diesel Engine Pistons, J. Phys. Conf. Ser., 1973, 1, p 2021. https://doi.org/10.1088/1742-6596/1973/1/012125CrossRef

55.

V. Karthickeyan, Effect of Thermal Barrier Coating on Performance and Emission Characteristics of Kapok Oil Methyl Ester in Diesel Engine, Aust. J. Mech. Eng., 2020, 18(3), p 467–480. https://doi.org/10.1080/14484846.2018.1546450CrossRef

56.

A.M. Kalinkin, V.Y. Vinogradov, and E.V. Kalinkina, Solid-State Synthesis of Nanocrystalline Gadolinium Zirconate Using Mechanical Activation, Inorg. Mater., 2021, 57(2), p 178–185. https://doi.org/10.1134/S0020168521020072CrossRef

57.

X. Zhong et al., Improvement in Thermal Shock Resistance of Gadolinium Zirconate Coating by Addition of Nanostructured Yttria Partially-Stabilized Zirconia, Ceram. Int., 2015, 41(6), p 7318–7324. https://doi.org/10.1016/j.ceramint.2015.02.027CrossRef

58.

D. Zhou et al., Thermal Cycling Performances of Multilayered Yttria-Stabilized Zirconia/Gadolinium Zirconate Thermal Barrier Coatings, J. Am. Ceram. Soc., 2020, 103(3), p 2048–2061. https://doi.org/10.1111/jace.16862CrossRef

59.

N. Krishnamurthy, M.S. Prashanthareddy, H.P. Raju, and H.S. Manohar, A Study of Parameters Affecting Wear Resistance of Alumina and Yttria Stabilized Zirconia Composite Coatings on Al-6061 Substrate, ISRN Ceram., 2012, 2012, p 1–13. https://doi.org/10.5402/2012/585892CrossRef

60.

Z. Shen, G. Liu, Z. Liu, L. He, R. Mu, and L. Wang, Dy Doped Gd2Zr2O7 Thermal Barrier Coatings: Thermal Expansion Coefficient, Microstructure and Failure Mechanism, Appl. Surf. Sci. Adv., 2021, 6, p 100174. https://doi.org/10.1016/j.apsadv.2021.100174CrossRef

61.

C. Wang, L. Guo, Y. Zhang, X. Zhao, and F. Ye, Enhanced Thermal Expansion and Fracture Toughness of Sc2O3-Doped Gd2Zr2O7 Ceramics, Ceram. Int., 2015, 41(9), p 10730–10735. https://doi.org/10.1016/j.ceramint.2015.05.008CrossRef

62.

R.S. Lima, A. Kucuk, and C.C. Berndt, Bimodal Distribution of Mechanical Properties on Plasma Sprayed Nanostructured Partially Stabilized Zirconia, Mater. Sci. Eng. A, 2002, 327(2), p 224–232. https://doi.org/10.1016/S0921-5093(01)01530-1CrossRef

63.

P. Carpio et al., Microstructure and Indentation Mechanical Properties of YSZ Nanostructured Coatings Obtained by Suspension Plasma Spraying, Surf. Coat. Technol., 2013, 220, p 237–243. https://doi.org/10.1016/j.surfcoat.2012.09.047CrossRef

64.

N. Krishnamurthy, M.S. Murali, B. Venkataraman, and P.G. Mukunda, Characterization and Solid Particle Erosion Behavior of Plasma Sprayed Alumina and Calcia-Stabilized Zirconia Coatings on Al-6061 Substrate, Wear, 2012, 274–275, p 15–27. https://doi.org/10.1016/j.wear.2011.08.003CrossRef

65.

J. Salguero, J.M. Vazquez-Martinez, I. Del Sol, and M. Batista, Application of Pin-On-Disc Techniques for the Study of Tribological Interferences in the Dry Machining of A92024–T3 (Al-Cu) Alloys, Materials (Basel), 2018, 11(7), p 1–11. https://doi.org/10.3390/ma11071236CrossRef

66.

P.M. Jadhav and N.S. KumarReddy, Wear Behavior of Carbide Tool Coated with Yttria-Stabilized Zirconia Nano Particles, IOP Conf. Ser. Mater. Sci. Eng, 2018 https://doi.org/10.1088/1757-899X/346/1/012007CrossRef

67.

A.D. Sarkar, Friction and Wear, Woodhead Publishing Limited, Cambridge, 1980. https://doi.org/10.2324/gomu.72.186CrossRef

68.

B.J. Briscoe and S.K. Sinha, Tribological Applications of Polymers and Their Composites - Past, Present and Future Prospects, Second. Elsevier, 2013. https://doi.org/10.1016/B978-0-444-59455-6.00001-5CrossRef

69.

Q. Luo, Tribofilms in Solid Lubricants, Encycl. Tribol., 2013 https://doi.org/10.1007/978-0-387-92897-5_1252CrossRef

70.

T.P. Mollart, J. Haupt, R. Gilmore, and W. Gissler, Tribological Behaviour of Homogeneous Ti-B-N, Ti-B-N-C and TiN/h-BN/TiB2 Multilayer Coatings, Surf. Coat. Technol., 1996, 86–87(1), p 231–236. https://doi.org/10.1016/S0257-8972(96)02950-7CrossRef

71.

S. Chinnusamy, V. Ramasamy, S. Venkatajalapathy, G.V. Kaliyannan, and S.K. Palaniappan, Experimental Investigation on the Effect of Ceramic Coating on the Wear Resistance of Al6061 Substrate, J. Mater. Res. Technol., 2019, 8(6), p 6125–6133. https://doi.org/10.1016/j.jmrt.2019.10.007CrossRef

72.

A. Günen, Micro-Abrasion Wear Behavior of Thermal-Spray-Coated Steel Tooth Drill Bits, Acta Phys. Pol. A, 2016, 130(1), p 217–222. https://doi.org/10.12693/APhysPolA.130.217CrossRef

73.

R. Gheisari and A.A. Polycarpou, Three-Body Abrasive Wear of Hard Coatings: Effects of Hardness and Roughness, Thin Solid Films, 2018, 666(May), p 66–75. https://doi.org/10.1016/j.tsf.2018.07.052CrossRef

74.

M.M. Stack and M.T. Mathew, Mapping the Micro-abrasion Resistance of WC/Co Based Coatings in Aqueous Conditions, Surf. Coat. Technol., 2004, 183(2–3), p 337–346. https://doi.org/10.1016/j.surfcoat.2003.09.061CrossRef

75.

V. Viswanathan, G. Dwivedi, and S. Sampath, Multilayer, Multimaterial Thermal Barrier Coating Systems: Design, Synthesis, and Performance Assessment, J. Am. Ceram. Soc., 2015, 98(6), p 1769–1777. https://doi.org/10.1111/jace.13563CrossRef

76.

S. Mahade, N. Curry, S. Björklund, N. Markocsan, and S. Joshi, Durability of Gadolinium Zirconate/YSZ Double-Layered Thermal Barrier Coatings Under Different Thermal Cyclic Test Conditions, Materials (Basel), 2019 https://doi.org/10.3390/ma12142238CrossRefPubMed

77.

C. Vorkötter, D.E. Mack, D. Zhou, O. Guillon, and R. Vaßen, Effect of Low-CTE Oxide-Dispersion-Strengthened Bond Coats on Columnar-Structured YSZ Coatings, Coatings, 2022, 12(3), p 1–11. https://doi.org/10.3390/coatings12030396CrossRef

78.

R. Vassen, H. Kassner, A. Stuke, D.E. Mack, M.O. Jarligo, and D. Stöver, Functionally Graded Thermal Barrier Coatings with Improved Reflectivity and High-Temperature Capability, Mater. Sci. Forum, 2010, 631–632, p 73–78. https://doi.org/10.4028/www.scientific.net/MSF.631-632.73CrossRef

79.

R. Vaßen, D.E. Mack, M. Tandler, Y.J. Sohn, D. Sebold, and O. Guillon, Unique Performance of Thermal Barrier Coatings Made of Yttria-Stabilized Zirconia at Extreme Temperatures (>1500°C), J. Am. Ceram. Soc., 2021, 104(1), p 463–471. https://doi.org/10.1111/jace.17452CrossRef

80.

J.P. Martins, H. Yu, Y. Chen, G. Brewster, R. McIntyre, and P. Xiao, Effect of Bond Coat Topography on the Fracture Mechanics and Lifetime of Air-Plasma Sprayed Thermal Barrier Coatings, Surf. Coat. Technol., 2021 https://doi.org/10.1016/j.surfcoat.2021.127447CrossRef

81.

E.J. Gildersleeve, V. Viswanathan, M.J. Lance, J.A. Haynes, B.A. Pint, and S. Sampath, Role of Bond Coat Processing Methods on the Durability of Plasma Sprayed Thermal Barrier Systems, Surf. Coat. Technol., 2019, 375, p 782–792. https://doi.org/10.1016/j.surfcoat.2019.07.065CrossRef

82.

S. Mahade, N. Curry, S. Björklund, N. Markocsan, and P. Nylén, Thermal Conductivity and Thermal Cyclic Fatigue of Multilayered Gd2Zr2O7/YSZ Thermal Barrier Coatings Processed by Suspension Plasma Spray, Surf. Coat. Technol., 2015, 283, p 329–336. https://doi.org/10.1016/j.surfcoat.2015.11.009CrossRef

83.

B. Guerreiro, R.S. Lima, N. Curry, M. Leitner, and K. Körner, The Influence of Plasma Composition in the Thermal Cyclic Performance of Yttria-Stabilized Zirconia (8YSZ) Thermal Barrier Coatings (TBCs), J. Therm. Spray Technol., 2021, 30(1–2), p 59–68. https://doi.org/10.1007/s11666-021-01153-7CrossRefPubMedCentral

84.

J.R. Nicholls, K.J. Lawson, A. Johnstone, and D.S. Rickerby, Methods to Reduce the Thermal Conductivity of EB-PVD TBCs, Surf. Coat. Technol., 2002, 151–152, p 383–391. https://doi.org/10.1016/S0257-8972(01)01651-6CrossRef

85.

P.K. Schelling and S.R. Phillpot, Mechanism of Thermal Transport in Zirconia and Yttria-Stabilized Zirconia by Molecular-Dynamics Simulation, J. Am. Ceram. Soc., 2001, 84(3–12), p 2997–3007. https://doi.org/10.1111/j.1151-2916.2001.tb01127.xCrossRef

86.

P.G. Klemens, Theory of Thermal Conduction in Thin Ceramic Films, Int. J. Thermophys., 2001, 22(1), p 265–275. https://doi.org/10.1023/A:1006776107140CrossRef

87.

K.W. Schlichting, N.P. Padture, and P.G. Klemens, Thermal Conductivity of Dense and Porous Yttria-Stabilized Zirconia, J. Mater. Sci., 2001, 36(12), p 3003–3010. https://doi.org/10.1023/A:1017970924312CrossRef

Title: Evaluation of Mechanical, Tribological, and Thermal Characterization of GZ TBCs for Heavy Duty Diesel Engine Application
Authors: Raja Velusamy
A. Suresh Babu
M. R. Swaminathan
P. Hariharan
Publication date: 12-04-2023
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 6/2024
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-023-08164-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2024

Uniaxial Electro-Mechanically Coupled Cyclic Deformation of VHB 4905 Dielectric Elastomer: Experiment and Constitutive Model

Comparative Evaluation of Surface Integrity of CMSX-4 Nickel-Based Superalloy After Grinding, Wire Electrical Discharge Machining, and Electrochemical Machining Processes

Development of EN AW-6082 Metal Foams and Stochastic Foam Modeling for the Individualization of Extruded Profiles

Microstructure Evolution and Hardness of Hypereutectic High Chromium Cast Iron after Tempering

Effects of Heat Treatment on Microstructure, Mechanical Properties, and Residual Stress of Oscillation Laser–Tungsten Inert Gas Hybrid Welded Joints for SA-738Gr.B Steel

Type IV Damage Evolution during Creep of 316LN SS-P91 Steel Dissimilar Weld Joint

Premium Partners