Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
The International Journal of Advanced Manufacturing Technology
Published in: The International Journal of Advanced Manufacturing Technology 11-12/2021

12-06-2021 | ORIGINAL ARTICLE

Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steel

Authors: Youssef Touggui, Alper Uysal, Uğur Emiroglu, Salim Belhadi, Mustapha Temmar

Published in: The International Journal of Advanced Manufacturing Technology | Issue 11-12/2021

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In recent years, the need for eco-friendly machining processes has increased dramatically in order to limit the excessive use of conventional cutting fluids, thereby reducing their negative effects on both the environment and the operator’s health. In this context, environmental alternatives such as dry cutting, minimum quantity lubrication (MQL), and nanofluid-assisted MQL have been demonstrated to be effective in overcoming this problem. In the present work, an attempt was made to improve the machining characteristics performance in turning of AISI 304 austenitic stainless steel (ASS) under dry, MQL and nanofluids, and hybrid nanofluid-assisted MQL conditions, with respect to surface roughness (Ra), main cutting force (Fc), and cutting temperature (T). The main purpose of this experimental study is to evaluate and compare the effect of dispersed nano-additives into the vegetable cutting fluid on the responses under consideration. As nano-additives, multi-walled carbon nanotube (MWCNT), nano molybdenum disulfide (MoS2), and nano graphene particles have been used. Additionally, the effects of lubricating conditions on flank wear (VB) were investigated. In the end, statistical analysis, regression modeling, and multi-criteria optimization based on desirability function were performed. The results revealed that the Ra, Fc, and T as well as VB were found to be lower with the use of nano graphene-reinforced nanofluid-assisted MQL followed by nano graphene/MoS2-reinforced hybrid nanofluid-assisted MQL, MWCNT/MoS2-reinforced hybrid nanofluid-assisted MQL, MWCNT-reinforced nanofluid-assisted MQL, nano MoS2-reinforced nanofluid-assisted MQL, and MQL, respectively, as compared to dry condition. Finally, it is worth mentioning that the nano graphene has the capability to perform as a lubricant/coolant, thus contributing positively to the turning process.
previous article Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication
next article Effect of the parametric optimization and heat-treatment on the 18Ni-300 maraging steel microstructural properties manufactured by directed energy deposition

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Mia M, Gupta MK, Singh G, Krolczyk G, Pimenov DY (2018) An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions. J Clean Prod 187:1069–1081CrossRef
2.
Ali MAM, Azmi AI, Murad MN, Zain MZM, Khalil ANM, Shuaib NA (2020) Roles of new bio-based nanolubricants towards eco-friendly and improved machinability of Inconal 718 alloys. Tribol Int 144:106106CrossRef
3.
Yildirim CV, Kivak T, Sarikaya M, Erzincanli F (2017) Determination of MQL parameters contributing to sustainable machining in the milling of nickel-base superalloy waspaloy. Arab J Sci Eng 42:4667–4681CrossRef
4.
Sen B, Hussain SAI, Mia M, Mandal UK, Mondal SP (2019) Selection of an ideal MQL-assisted milling condition: an NSGA-II-coupled TOPSIS approach for improving machinability of Inconel 690. Int J Adv Manuf Technol 103:1811–1829CrossRef
5.
Nouioua M, Yallese MA, Khettabi R, Belhadi S, Mabrouki T (2017) Comparative assessment of cooling conditions, including MQL technology on machining factors in an environmentally friendly approach. Int J Manuf Technol 91:3079–3094CrossRef
6.
Yildirim CV, Kivak T, Erzincanli F (2019) Tool wear and surface roughness analysis in milling with ceramic tools of Waspaloy: a comparison of machining performance with different cooling methods. J Braz Soc Mech Sci Eng 41:83CrossRef
7.
Sarikaya M, Güllü A (2015) Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25. J Clean Prod 91:347–357CrossRef
8.
Elbah M, Laouici H, Benlahmidi S, Nouioua M, Yallese MA (2019) Comparative assessment of machining environments (dry, wet and MQL) in hard turning of AISI 4140 steel with CC6050 tools. Int J Manuf Technol 105:2581–2597CrossRef
9.
Li KM, Lin CP (2012) Study on minimum quantity lubrication in micro-grinding. Int J Adv Manuf Technol 62:99–105CrossRef
10.
Singh G, Pruncu CI, Gupta MK, Mia M, Khan AM, Jamil M, Pimenov DY, Sen B, Sharma VS (2019) Investigations of machining characteristics in the upgraded MQL-assisted turning of pure titanium alloys using evolutionary algorithms. Materials 19:999CrossRef
11.
Bedi SS, Behera GC, Datta S (2020) Effects of cutting speed on MQL machining performance of AISI 304 stainless steel using uncoated carbide insert: application potential of coconut oil and rice bran oil as cutting fluids. Arab J Sci Eng 45:8877–8893CrossRef
12.
Rajaguru J, Arunachalam N (2020) A comprehensive investigation on the effect of flood and MQL coolant on the machinability and stress corrosion cracking of super duplex stainless steel. J Mater Proces Tech 276:116417CrossRef
13.
Uysal A (2016) Investigation of flank wear in MQL milling of ferritic stainless steel by using nano graphene reinforced vegetable cutting fluid. Indus Lub Tribology 68(4):446–451CrossRef
14.
Uysal A (2017) An experimental study on cutting temperature and burr in milling of ferritic stainless steel under MQL using nano graphene reinforced cutting fluid. Adv Mat Pro 2(9):560–563
15.
Krolczyk GM, Maruda RW, Krolczyk JB, Wojciechowski S, Mia M, Nieslony P, Budzik G (2019) Ecological trends in machining as a key factor in sustainable production- a review. J Clean Prod 218:601–615CrossRef
16.
Gupta MK, Jamil M, Wang X, Song Q, Liu Z, Mia M, Hegab H, Khan AM, Collado AG, Pruncu CI, Shah Imran GM (2019) Performance evaluation of vegetable oil-based nano-cutting fluids in environmentally friendly machining of Inconel-800 Alloy. Materials 12:2792CrossRef
17.
Sharma AK, Tiwari AK, Dixit AR (2016) Effects of minimum quantity lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: a review. J Clean Prod 127:1–18CrossRef
18.
Sharma AK, Singh RK, Dixit AR, Tiwari AK (2016) Characterization and experimental investigation of Al2O3 nanoparticle based cutting fluid in turning of AISI 1040 steel under minimum quantity lubrication (MQL). Mater Today Proc 3:1899–1906CrossRef
19.
Jamil M, Khan AM, Hegab H, Gong L, Mia M, Gupta MK, He N (2019) Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti-6Al-4V. Int J Adv Manuf Technol 102:3895–3909CrossRef
20.
Hegab H, Umer U, Soliman M, Kishawy HA (2018) Effects on nano-cutting fluids on tool performance and chip morphology during machining Inconel 718. Inter J Adv Manuf Technol 96:3449–3458CrossRef
21.
Das A, Kumar Patel S, Das SR (2019) Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mech Ind 20:506CrossRef
22.
Öndin O, Kıvak T, Sarıkaya M, Yıldırım ÇV (2020) Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel. Tribol Int 148:106323CrossRef
23.
Uysal A, Demiren F, Altan E (2015) Applying minimum quantity lubrication (MQL) method on milling of martensitic stainless steel by using nano MoS2 reinforced vegetable cutting fluid. Procedia Soc Behav Sci 195:2742–2747CrossRef
24.
Patole PB, Kulkarni VV (2018) Optimization of process parameters based on surface roughness and cutting force in MQL turning of AISI 4340 using nano fluid. Mater. Today Proc 5:104–112
25.
Singh R, Dureja JS, Dogra M, Gupta MK, Mia M (2019) Influence of graphene-enriched nanofluids and textured tool on machining behavior of Ti-6Al-AV alloy. Inter J Adv Manuf Techno 105:1685–1697CrossRef
26.
Sharma AK, Tiwari AK, Dixit AR, Rk S (2020) Measurement of machining force and surface roughness in turning of AISI 304 steel using alumina-MWCNT hybrid nanoparticles enriched cutting fluid. Measurement 150:107078CrossRef
27.
28.
Touggui Y, Belhadi S, Uysal A, Temmar M, Yallese MA (2021) A comparative study on performance of cermet and coated carbide inserts in straight tuning AISI 316L austenitic stainless steel. Inter J Adv Manuf Techno 112:241–260CrossRef
29.
Singh RK, Dixit AR, Mandal A, Sharma AK (2017) Emerging application of nanoparticle-enriched cutting fluid in metal removal processes: a review. J Braz Soc Mech Sci Eng 39:4677–4717CrossRef
30.
31.
Xu Y, Peng Y, Dearn KD, Zheng X, Yao L, Hu X (2015) Synergistic lubricating behaviors of graphene and MoS2 dispersed in esterified bio-oil for steel/steel contact. Wear 342-343:297–309CrossRef
32.
Uysal A (2018) Effects of nano graphene particles on surface roughness and cutting temperature during MQL milling of AISI 430 stainless steel. Materials Testing 60(5):533–537CrossRef
33.
Gunichenko O, Bushlya V, Zhou J, Stahl JE (2017) Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools. Wear 309:253–269CrossRef
34.
Kulkarni AP, Joshi GG, Sargade VG (2013) Dry turning of AISI 304 austenitic stainless steel using AlTiCrN coated insert produced by HPPMS technique. Procedia Eng 64:737–746CrossRef
35.
Pramanik A, Islam MN, Basak A, Littlefair G (2013) Machining and tool wear mechanisms during machining titanium alloys. Adv Mater Res 651:338–343CrossRef
36.
Sharma AK, Katiyar JK, Bhaumik S, Roy S (2019) Influence of alumina/MWCNT hybrid nanoparticle additive on tribological properties of lubricants in turning operations. Friction 7(2):153–168CrossRef
37.
Samuel J, Rafiee J, Dhiman P, Yu Z, Korartkar N (2011) Graphene colloidal suspensions as high performance semi-synthetic metal-working fluids. J Phys Chem C 115(8):3410–3415CrossRef
38.
Sharma AK, Tiwari AK, Dixit AR, Singh RK, Singh M (2018) Novel use of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation. Tribol Int 119:99–111CrossRef
39.
Singh R, Dureja JS, Dogra M, Gupta MK, Mia M, Song Q (2020) Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy. Tribology 145:106183CrossRef
40.
Seid Ahmed Y, Youssef H, El-Hofy H et al (2018) Prediction and optimization of drilling parameters in drilling of AISI 304 and AISI 2205 steels with PVD monolayer and multilayer coated drills. J Manuf Mat Proces 2(1):1–16
41.
Mia M, Dhar NR (2018) Modeling of surface roughness using RSM, FL and SA in dry hard turning. Arab J Sci Eng 43:1125–1136CrossRef
42.
Mia M, Bashir MA, Khan MA, Dhar NR (2016) Optimization of MQL flow rate for minimum cutting force and surface roughness in end milling of hardened steel (HRC40). Int J Adv Manuf Technol 2016:1–16
43.
Mia M, Al Bashir M, Dhar NR (2016) Effects of cutting parameters and machining environment on surface roughness in hard turning using desgin of experiment. In AIP conference proceedings; AIP Publishing LLC: Melville, NY, USA 1754 60012
44.
Saidi R, Ben Fathallah B, Mabrouki T, Belhadi S, Yallese MA (2018) Modeling and optimization of the turning parameters of cobalt alloy (Stellite 6) based on RSM and desirability function. Int J Adv Manuf Technol 100:2945–2968CrossRef
Metadata
Title
Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steel
Authors
Youssef Touggui
Alper Uysal
Uğur Emiroglu
Salim Belhadi
Mustapha Temmar
Publication date
12-06-2021
Publisher
Springer London
Published in
The International Journal of Advanced Manufacturing Technology / Issue 11-12/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-021-07448-x

Other articles of this Issue 11-12/2021

The International Journal of Advanced Manufacturing Technology 11-12/2021 Go to the issue

ORIGINAL ARTICLE

Multi-objective optimization of solvent cast 3D printing process parameters for fabrication of biodegradable composite stents

ORIGINAL ARTICLE

Measurement and modeling methods of grinding-induced residual stress distribution of gear tooth flank

ORIGINAL ARTICLE

A study on intelligent grinding systems with industrial perspective

ORIGINAL ARTICLE

Genetic algorithm for the reduction printing time and dimensional precision improvement on 3D components printed by Fused Filament Fabrication

ORIGINAL ARTICLE

A deep learning-based approach for machining process route generation

ORIGINAL ARTICLE

Sustainable reconfigurable manufacturing system design using adapted multi-objective evolutionary-based approaches

Premium Partners

    Image Credits