Top

Journal of Materials Engineering and Performance

Published in:

13-02-2017

Fabrication and Characterization of Ni-P-CoNiCrAlY Composite Coatings

Authors: H. Heydari, S. M. Monirvaghefi, Ali Hadipour

Published in: Journal of Materials Engineering and Performance | Issue 3/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, Ni-P-CoNiCrAlY composite coatings were deposited on 310 stainless steel. The surface morphology and cross-sectional observations were carried out using scanning electron microscopy and optical microscopy. The high-temperature corrosion of all coatings was evaluated by cyclic oxidation method. According to the results, the amounts of CoNiCrAlY particles co-deposited in all samples coated at pH = 4.7 were higher than that of those produced at pH = 6.7. Also, the surface roughness of all composite coatings coated at pH = 6.7 is lower than the coatings produced at pH = 4.7. The Ni-P-(3 g/l) CoNiCrAlY deposit produced at pH = 6.7 had the best corrosion resistance among other coatings.

previous article Influence of M-TIG and A-TIG Welding Process on Microstructure and Mechanical Behavior of 409 Ferritic Stainless Steel

next article Microstructure, Tensile Properties and Work Hardening Behavior of GTA-Welded Dual-Phase Steels

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

M.J. Pomeroy, Coatings for Gas Turbine Materials and Long Term Stability Issues, Mater. Des., 2005, 26, p 223–231CrossRef

M. Seraffon, N.J. Simms, J.R. Nicholls, and D.S. Rickerby, The Development of New Bond Coat Compositions for Thermal Barrier Coating Systems Operating Under Industrial Gas Turbine Conditions, Surf. Coat. Technol., 2011, 206, p 1529–1537CrossRef

R. Rajendran, Gas Turbine Coatings–An Overview, Eng. Fail. Anal., 2012, 26, p 355–369CrossRef

D. Marcin, T. Jeanine, and K.D.K. Gupta, Protective Coatings in the Gas Turbine Engine, Surf. Coat. Technol., 1994, 68, p 1–9CrossRef

T.A. Taylor and P.N. Walsh, Thermal Expansion of MCrAlY Alloys, Surf. Coat. Technol., 2004, 177, p 24–31CrossRef

J. Toscano, Ed., Influence of Composition and Processing on the Oxidation Behavior of MCrAlY-Coatings for TBC Applications, Forschungszentrum, Julich, 2009

S.K. Mishra, S. Pandey, P. Mahato, K. Shravan Kumar, and S. Bysakh, Microstructural Studies on EB-PVD Deposited NiCrAlY, YSZ and Lanthanum Zirconate for Thermal Barrier Applications, Surf. Coat. Technol., 2012, 207, p 143–148CrossRef

V.P. Aurelie, L.M. Christine, O. Djar, R. Aymeric, and M. Daniel, Effect of Modification by Pt and Manufacturing Processes on the Microstructure of Two NiCoCrAlYTa Bond Coatings Intended for Thermal Barrier System Applications, Surf. Coat. Technol., 2010, 205, p 717–727CrossRef

L. Zhao, M. Parco, and E. Lugscheider, High Velocity Oxy-fuel Thermal Spraying of a NiCoCrAlY alloy, Surf. Coat. Technol., 2004, 179, p 272–278CrossRef

10.

J.A. Cabral-Miramontes, C. Gaona-Tiburcio, F. Almeraya-Calderon, F.H. Estupinan-Lopez, G. K. Pedraza-Basulto, C. A. Poblano-Salas, Parameter Studies on High-Velocity Oxy-Fuel Spraying of CoNiCrAlY Coatings Used in the Aeronautical Industry. Int. J. Corros. 2014 (2014).

11.

F. Xizhi, B. Zou, L. Gu, C. Wang, Y. Wang, W. Huang, L. Zhu, and X. Cao, Investigation of the Bond Coats for Thermal Barrier Coatings on Mg Alloy, Appl. Surf. Sci., 2013, 265, p 264–273CrossRef

12.

K. Fritscher, C. Leyens, and U. Schulz, Investigation of an As-sprayed NiCoCrAlY Overlay Coating: A Thermoanalytical Approach, Mater. Sci. Eng., 2004, 369, p 144–150CrossRef

13.

M. Mohammadi, S. Javadpour, A. Kobayashi, S.A. Jenabali Jahromi, and K. Shirvani, Thermal Shock Properties and Microstructure Investigation of LVPS and HVOF-CoNiCrAlYSi Coatings on the IN738LC Superalloy, Vacuum, 2013, 88, p 124–129CrossRef

14.

B. Marie-Pierre, G. Benoit, J. Pierre, and R. Catherine, MCrAlY coating developed via a new electroless-like route: influence of deposition parameters, Surf. Coat. Technol., 2003, 162, p 248–260CrossRef

15.

S. Mercier, I. Giovannetti, P. Josso, and M.P. Bacos, Analysis of the Co-deposition of CrAlYTa Particles with Nickel by an Electrolytic–Electroless Route: The Influence of Solution and Hydrodynamic Parameters, Surf. Coat. Technol., 2006, 201, p 120–128CrossRef

16.

M. Schlesinger, Electroless Deposition of Nickel, Mod. Electroplat., 2000, 4, p 667–684

17.

J. Sudagar, L. Jianshe, and S. Wei, Electroless Nickel, Alloy, Composite and Nano Coatings–A Critical Review, J. Alloys Compd., 2013, 571, p 183–204CrossRef

18.

P. Sahoo and K.D. Suman, Tribology of Electroless Nickel Coatings–A Review, Mater. Des., 2011, 32, p 1760–1775CrossRef

19.

R.C. Agarwala and A. Vijaya, Electroless Alloy/Composite Coatings: A Review, Sadhana, 2003, 28, p 475–493CrossRef

20.

J.N. Balaraju, T.S.N. Sankara Narayanan, and S.K. Seshadri, Structure and Phase Transformation Behaviour of Electroless Ni–P Composite Coatings, Mater. Res. Bull., 2006, 41, p 847–860CrossRef

21.

M. Sarret, C. Muller, and A. Amell, Electroless NiP Micro-and Nano-Composite Coatings, Surf. Coat. Technol., 2006, 201, p 389–395CrossRef

22.

J.N. Balaraju and K.S. Rajam, Electroless Deposition and Characterization of High Phosphorus 13; Ni-P-Si3N4 Composite Coatings, Int. J. Electrochem. Sci., 2007, 2, p 747–761

23.

S. Alirezaei, S.M. Monir Vaghefi, M. Urgen, A. Saatchi, and K. Kazmanli, Novel Investigation on Nanostructure Ni–P–Ag Composite Coatings, Appl. Surf. Sci., 2012, 261, p 155–158CrossRef

24.

M.A. Kumar, R.C. Agarwala, and V. Agarwala, Synthesis and Characterization of Electroless Ni-P Coated Graphite Particles, Bull. Mater. Sci., 2008, 31, p 819–824CrossRef

25.

J.N. Balaraju, T.S.N.S. Narayanan, and S.K. Seshadri, Electroless Ni–P Composite Coatings, J. Appl. Electrochem., 2003, 33, p 807–816CrossRef

Title: Fabrication and Characterization of Ni-P-CoNiCrAlY Composite Coatings
Authors: H. Heydari
S. M. Monirvaghefi
Ali Hadipour
Publication date: 13-02-2017
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 3/2017
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2537-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2017

Microstructure and Mechanical Properties of Microwave Post-processed Ni Coating

Microstructure, Tensile Properties and Work Hardening Behavior of GTA-Welded Dual-Phase Steels

Fatigue Life Prediction of 2D Woven Ceramic-Matrix Composites at Room and Elevated Temperatures

The Effect of Heat Treatment on the Microstructure and Properties of Explosively Welded Titanium-Steel Plates

Metallurgical Aspects of Self-lubricating Composites Containing Graphite and MoS2

Electrical Transport Properties of Single-Crystalline β-Zn4Sb3 Prepared Through the Zn-Sn Mixed-Flux Method

Premium Partners