Top

Colloid and Polymer Science

Published in:

29-11-2023 | Research

Fabrication and evaluation of stimuli-sensitive xanthan gum-based hydrogel as a potential carrier for a hydrophobic drug ibuprofen

Authors: Priyanka Meena, Poonam Singh, Sudhir G. Warkar

Published in: Colloid and Polymer Science | Issue 3/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This research work aimed at the synthesis and characterization of novel xanthan gum/polyacrylamide/polyvinyl pyrrolidone (XG/PAM/PVP)-based hydrogels for the delivery of the hydrophobic drug ibuprofen. The influence of crosslinker, biopolymer, and initiator amount on the hydrogel’s swelling ratio, porosity, and gel fraction was also investigated. Several techniques like Powder X-ray Diffraction (PXRD), Attenuated Total Reflection-Fourier Transform Infrared spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), and Thermogravimetry Analysis (TGA) were employed to characterize the synthesized hydrogels. Sol–gel analysis revealed an increase in the gel fraction with a rise in the concentration of MBA, XG, and KPS. Porosity measurements indicated a greater porosity with higher XG and KPS amounts, while porosity decreased as the MBA amount increased. Furthermore, the presence of PVP in the hydrogel was observed to greatly enhance various properties, including gel fraction, swelling ratio, porosity, drug loading, and drug release percent. Notably, under alkaline conditions (pH 7.4), the swelling ratio and release of ibuprofen were significantly increased, as compared to acidic (pH 1.2). The ibuprofen release from the XG/PAM/PVP hydrogel is governed by a Fickian diffusion mechanism, and the Korsmeyer-Peppas model serves as the most appropriate model for elucidating the drug release kinetic in both pH 1.2 and 7.4. The pH-responsive nature exhibited by the XG/PAM/PVP hydrogel highlights its potential as a drug delivery system.

previous article Temperature dependent micellar study of streptomycin sulfate in aqueous amino acid solutions: physicochemical approach

next article Simultaneous enhancement of the impact strength and tensile modulus of PP/EPDM/TiO2 nanocomposite fabricated by fused filament fabrication

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Nguyen HT, Nguyen LT, Ha AC, Huynh PD (2023) Evaluation of ibuprofen prolonged release of biomedical PLA-PEG-PLA hydrogel via degradation mechanism. 2023. https://doi.org/10.1155/2023/5005316

Shinde AK et al (2019) Enhancement solubility and dissolution rate of paracetamol and ibuprofen by coamorphous particles using microwave technique. Asian J Pharm Clin Res 12:155–162. https://doi.org/10.22159/ajpcr.2019.v12i11.34589CrossRef

Sami AJ et al (2018) Sustained release of ibuprofen by a novel formulated hydrogel containing molecular pharmaceutics & organic process research sustained release of ibuprofen by a novel formulated hydrogel containing graphene oxide. Mol Pharm Org Process Res 6:1000143. https://doi.org/10.4172/2329-9053.1000143CrossRef

Wang XH, Su T, Zhao J et al (2020) Fabrication of polysaccharides-based hydrogel films for transdermal sustained delivery of ibuprofen. Cellulose 27:10277–10292. https://doi.org/10.1007/s10570-020-03503-0CrossRef

Suhail M, Hsieh YH, Khan A et al (2021) Preparation and in vitro evaluation of aspartic/alginic acid based semi-interpenetrating network hydrogels for controlled release of ibuprofen. Gels 7. https://doi.org/10.3390/gels7020068

Kulkarni RV, Sa B (2008) Evaluation of pH-sensitivity and drug release characteristics of (polyacrylamide-grafted-xanthan)-carboxymethyl cellulose-based pH-sensitive interpenetrating network hydrogel beads. Drug Dev Ind Pharm 34:1406–1414. https://doi.org/10.1080/03639040802130079CrossRefPubMed

Hanna DH, Saad GR (2019) Encapsulation of ciprofloxacin within modified xanthan gum- chitosan based hydrogel for drug delivery. Bioorg Chem 84:115–124. https://doi.org/10.1016/j.bioorg.2018.11.036CrossRefPubMed

Sethi S, Saruchi KBS et al (2020) Cross-linked xanthan gum–starch hydrogels as promising materials for controlled drug delivery. Cellulose 27:4565–4589. https://doi.org/10.1007/s10570-020-03082-0CrossRef

Malik NS, Ahmad M, Minhas MU et al (2020) Chitosan/xanthan gum based hydrogels as potential carrier for an antiviral drug: fabrication, characterization, and safety evaluation. Front Chem 8:1–16. https://doi.org/10.3389/fchem.2020.00050CrossRef

10.

Tushar, Saraswat Y, Meena P, Warkar SG (2023) Synthesis and characterization of novel xanthan gum-based pH-sensitive hydrogel for metformin hydrochloride release. Colloid Polym Sci. https://doi.org/10.1007/s00396-023-05135-9CrossRef

11.

Bhattacharyya R, Chowdhury P (2021) Hydrogels of acryloyl guar gum-g-(acrylic acid-co-3sulfopropylacrylate) for high-performance adsorption and release of gentamicin sulphate. J Polym Res 28. https://doi.org/10.1007/s10965-021-02633-8

12.

Sutar PB, Mishra RK, Pal K, Banthia AK (2008) Development of pH sensitive polyacrylamide grafted pectin hydrogel for controlled drug delivery system. J Mater Sci Mater Med 19:2247–2253. https://doi.org/10.1007/s10856-007-3162-yCrossRefPubMed

13.

Reddy PRS, Rao KM, Rao KSVK et al (2014) Synthesis of alginate based silver nanocomposite hydrogels for biomedical applications. Macromol Res 22:832–842. https://doi.org/10.1007/s13233-014-2117-7CrossRef

14.

Rizwan M, Yahya R, Hassan A et al (2017) pH sensitive hydrogels in drug delivery: brief history, properties, swelling, and release mechanism, material selection and applications. Polymers (Basel) 9. https://doi.org/10.3390/polym9040137

15.

Ahmad U, Sohail M, Ahmad M et al (2019) Chitosan based thermosensitive injectable hydrogels for controlled delivery of loxoprofen: development, characterization and in-vivo evaluation. Int J Biol Macromol 129:233–245. https://doi.org/10.1016/j.ijbiomac.2019.02.031CrossRefPubMed

16.

Munim SA, Raza ZA (2019) Poly(lactic acid) based hydrogels: formation, characteristics and biomedical applications. J Porous Mater 26:881–901. https://doi.org/10.1007/s10934-018-0687-zCrossRef

17.

Hosseinzadeh H (2010) Controlled release of diclofenac sodium from pH-responsive carrageenan-g-poly(acrylic acid) superabsorbent hydrogel. J Chem Sci 122:651–659. https://doi.org/10.1007/s12039-010-0100-1CrossRef

18.

García-Verdugo KF, Ramírez-Irigoyen AJ, Castillo-Ortega M et al (2022) A pH/temperature-sensitive s-IPN based on poly(vinyl alcohol), poly(vinyl methyl ether-alt-maleic acid) and poly(vinyl methyl ether) prepared by autoclaving. Macromol Res 30:353–364. https://doi.org/10.1007/s13233-022-0044-6CrossRef

19.

Raza MA, Park SH (2020) Irradiated Ch/GG/PVP-based stimuli-responsive hydrogels for controlled drug release. J Appl Polym Sci 137. https://doi.org/10.1002/app.49041

20.

Thirupathi K, Phan TTV, Santhamoorthy M et al (2022) pH and thermoresponsive PNIPAm-co-polyacrylamide hydrogel for dual stimuli-responsive controlled drug delivery. Polymers (Basel) 15:167. https://doi.org/10.3390/polym15010167CrossRefPubMed

21.

Martinez-Ruvalcabal A et al (2009) Swelling characterization and drug delivery kinetics of polyacrylamide-co-itaconic acid/chitosan hydrogels 3:25–32. https://doi.org/10.3144/expresspolymlett.2009.5CrossRef

22.

Musa H, Yahaya S (2022) Polyacrylamide hydrogels for application in oral drug delivery. Niger J Sci Res

23.

Wei QB, Fu F, Zhang YQ et al (2014) PH-responsive CMC/PAM/PVP semi-IPN hydrogels for theophylline drug release. J Polym Res 21. https://doi.org/10.1007/s10965-014-0453-0

24.

Meena P, Singh P, Warkar SG (2023) Development and assessment of carboxymethyl tamarind kernel gum-based pH-responsive hydrogel for release of diclofenac sodium. Eur Polym J 197:112340. https://doi.org/10.1016/j.eurpolymj.2023.112340CrossRef

25.

Lim DK, Cui MH, Nam JM (2011) Highly stable, amphiphilic DNA-encoded nanoparticle conjugates for DNA encoding/decoding applications. J Mater Chem 21:9467–9470. https://doi.org/10.1039/c1jm11150gCrossRef

26.

Afriani K, Sutanti Budikania T (2020) Synthesis and characterization of hydrogel of chitosan-poly(N-vinyl-2-pirrolidone) (PVP)-alginate for ibuprofen release. J Pure Appl Chem Res 9:201–211. https://doi.org/10.21776/ub.jpacr.2020.009.03.558CrossRef

27.

Chauhan D, Kumar A, Warkar SG (2022) Synthesis, characterization and metal ions sensing applications of meta-benziporphodimethene-embedded polyacrylamide/carboxymethyl guargum polymeric hydrogels in water. Environ Technol 43:991–1002. https://doi.org/10.1080/09593330.2020.1812730CrossRefPubMed

28.

Tan LS, Tan HL, Deekonda K et al (2021) Fabrication of radiation cross-linked diclofenac sodium loaded carboxymethyl sago pulp/chitosan hydrogel for enteric and sustained drug delivery. Carbohydr Polym Technol Appl 2:100084. https://doi.org/10.1016/j.carpta.2021.100084CrossRef

29.

Rahmani S, Olad A, Rahmani Z (2022) Preparation of self-healable nanocomposite hydrogel based on gum arabic/gelatin and graphene oxide: study of drug delivery behavior. Polym Bull 80:4117–4138. https://doi.org/10.1007/s00289-022-04247-6CrossRef

30.

Naeem F et al (2017) pH responsive cross-linked polymeric matrices based on natural polymers: effect of process variables on swelling characterization and drug delivery properties. BioImpacts 7:177–192. https://doi.org/10.15171/bi.2017.21CrossRefPubMedPubMedCentral

31.

Kalantari K, Mostafavi E, Saleh B et al (2020) Chitosan/PVA hydrogels incorporated with green synthesized cerium oxide nanoparticles for wound healing applications. Eur Polym J 134:109853. https://doi.org/10.1016/j.eurpolymj.2020.109853CrossRef

32.

Kumar PTS et al (2014) Flexible, micro-porous chitosan-gelatin hydrogel/nanofibrin composite bandages for treating burn wounds. RSC Adv 4:65081–65087. https://doi.org/10.1039/c4ra11969jADSCrossRef

33.

Khan R, Zaman M, Salawi A et al (2022) Synthesis of chemically cross-linked pH-sensitive hydrogels for the sustained delivery of ezetimibe. Gels 8. https://doi.org/10.3390/gels8050281

34.

Safari JB, Bapolisi AM, Krause RWM (2021) Development of pH-sensitive chitosan-g-poly(acrylamide-co-acrylic acid) hydrogel for controlled drug delivery of tenofovir disoproxil fumarate. Polymers (Basel) 13. https://doi.org/10.3390/polym13203571

35.

Rashid H, Ahmad M, Minhas MU et al (2015) Synthesis and characterization of poly(hydroxyethyl methacrylate-co-methacrylic acid) cross linked polymeric network for the delivery of analgesic agent. J Chem Soc Pakistan 37:999–1007

36.

Tulain UR, Ahmad M, Rashid A et al (2018) Fabrication of pH-responsive hydrogel and its in vitro and in vivo evaluation. Adv Polym Technol 37:290–304. https://doi.org/10.1002/adv.21668CrossRef

37.

Niu B, Jia J, Wang H et al (2019) In vitro and in vivo release of diclofenac sodium-loaded sodium alginate/carboxymethyl chitosan-ZnO hydrogel beads. Int J Biol Macromol 141:1191–1198. https://doi.org/10.1016/j.ijbiomac.2019.09.059CrossRefPubMed

38.

Jana S, Sharma R, Maiti S, Sen KK (2016) Interpenetrating hydrogels of O-carboxymethyl tamarind gum and alginate for monitoring delivery of acyclovir. Int J Biol Macromol 92:1034–1039. https://doi.org/10.1016/j.ijbiomac.2016.08.017CrossRefPubMed

39.

Varahala Setti ML, Ratna JV (2009) Preparation and evaluation of controlled release tablets of carvedilol. Asian J Pharm 3:252–256. https://doi.org/10.4103/0973-8398.56307CrossRef

40.

Malik R, Warkar SG, Saxena R (2023) Carboxy-methyl tamarind kernel gum based bio-hydrogel for sustainable agronomy. Mater Today Commun 35:105473. https://doi.org/10.1016/j.mtcomm.2023.105473CrossRef

41.

Mali KK, Dhawale SC, Dias RJ (2017) Synthesis and characterization of hydrogel films of carboxymethyl tamarind gum using citric acid. Int J Biol Macromol 105:463–470. https://doi.org/10.1016/j.ijbiomac.2017.07.058CrossRefPubMed

42.

Suhail M, Khan A, Rosenholm JM et al (2021) Fabrication and characterization of diclofenac sodium loaded hydrogels of sodium alginate as sustained release carrier. Gels 7:1–16. https://doi.org/10.3390/gels7010010CrossRef

43.

Nawaz S, Khan S, Farooq U et al (2018) Biocompatible hydrogels for the controlled delivery of anti-hypertensive agent: development, characterization and in vitro evaluation. Des Monomers Polym 21:18–32. https://doi.org/10.1080/15685551.2018.1445416CrossRef

44.

Elzayat EM, Abdel-Rahman AA, Ahmed SM et al (2016) Studying the impact of formulation and processing parameters on the release characteristics from hydroxypropyl methylcellulose matrix tablets of diclofenac. Acta Pol Pharm - Drug Res 73:439–452

45.

Abdelkader R, Mohammed B (2016) Green synthesis of cationic polyacrylamide composite catalyzed by an ecologically catalyst clay called maghnite-H+ (Algerian MMT) under microwave irradiation. Bull Chem React Eng Catal 11:170–175. https://doi.org/10.9767/bcrec.11.2.543.170-175CrossRef

46.

Khushbu Warkar S G, Thombare N (2022) Controlled release and release kinetics studies of boron through the functional formulation of carboxymethyl tamarind kernel gum-based superabsorbent hydrogel. Polym Bull 79:2287–2303. https://doi.org/10.1007/s00289-021-03634-9CrossRef

47.

Ekici S, Saraydin D (2007) Interpenetrating polymeric network hydrogels for potential gastrointestinal. Polym Int 56:1371–1377. https://doi.org/10.1002/pi.2271CrossRef

48.

Goonoo N et al (2014) Naltrexone: a review of existing sustained drug delivery systems and emerging nano-based systems. J Control Release 183:154–166. https://doi.org/10.1016/j.jconrel.2014.03.046CrossRefPubMed

49.

Das D, Das R, Mandal J et al (2014) Dextrin crosslinked with poly(lactic acid): a novel hydrogel for controlled drug release application. J Appl Polym Sci 131:1–12. https://doi.org/10.1002/app.40039CrossRef

50.

Kajal KR, Meena P, Warkar SG (2023) Development and characterization of pH-responsive CMTKG/PAM/PEG hydrogel for oral administration of etophylline. Colloid Polym Sci. https://doi.org/10.1007/s00396-023-05152-8CrossRef

Title: Fabrication and evaluation of stimuli-sensitive xanthan gum-based hydrogel as a potential carrier for a hydrophobic drug ibuprofen
Authors: Priyanka Meena
Poonam Singh
Sudhir G. Warkar
Publication date: 29-11-2023
Publisher: Springer Berlin Heidelberg
Published in: Colloid and Polymer Science / Issue 3/2024
Print ISSN: 0303-402X
Electronic ISSN: 1435-1536
DOI: https://doi.org/10.1007/s00396-023-05198-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2024

Properties of surface layers of polyethylene naphthalate substrates modified by ultraviolet light irradiation for their electroless deposition

N-dodecyl β-D-glucopyranoside micelles catalyzed reaction of ascorbic acid with azure A chloride salt dye in acidic aqueous solution: A kinetic, thermodynamic, and mechanism study

A facile method to determine the molar mass of soft nanoparticles

Fabrication of green polymeric hybrid materials for batch and column adsorption study of Blue-XGRRL dye

Temperature dependent micellar study of streptomycin sulfate in aqueous amino acid solutions: physicochemical approach

Simultaneous enhancement of the impact strength and tensile modulus of PP/EPDM/TiO2 nanocomposite fabricated by fused filament fabrication

Premium Partners