Top

Journal of Materials Engineering and Performance

Published in:

19-02-2019

Fabrication of Al-Based Composites by Centrifugal Mixed-Powder Method and Their Application for Grinding Wheels

Authors: Yoshimi Watanabe, Takayasu Sugiura, Hisashi Sato, Hideaki Tsuge

Published in: Journal of Materials Engineering and Performance | Issue 7/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, Al-based metal matrix composite (MMC) with diamond and cBN abrasive grains was fabricated by a centrifugal mixed-powder method (CMPM). Two types of CMPM experiments with and without consolidated part were carried out. It was found that the MMC dispersed with diamond and cBN abrasive grains can be successfully fabricated by CMPM. In case of CMPM without consolidated part, the homogeneous distribution of the abrasive grains along hoop direction in the MMC could not be achieved due to slumping of mixed-powder by gravity. On the other hand, modified CMPM using consolidated part could fabricate a MMC with uniform distribution of abrasive grains along hoop direction. Grinding wheels were manufactured using fabricated MMC samples, and drilling experiments were carried out on carbon fiber reinforced plastic (CFRP). It was found that the better drilling performance was found for the Al/Diamond grinding wheel rather than Al/cBN grinding wheel. Therefore, it can be concluded that the grinding wheel was not subjected at high temperature even though the drilling was carried out under dry condition.

previous article Microstructure and Hardness Evolution in Haynes 282 Nickel-Based Superalloy During Multi-variant Aging Heat Treatment

next article Mechanical Performance of Nodular Cast Irons After Prolonged High-Temperature Exposure

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

W.-C. Chen, Some Experimental Investigations in the Drilling of Carbon Fiber-Reinforced Plastic (CFRP) Composite Laminates, Int. J. Mach. Tools Manuf., 1997, 37(8), p 1097–1108CrossRef

Y. Karpat, B. Deger, and O. Bahtiyar, Drilling Thick Fabric Woven CFRP Laminates with Double Point Angle Drills, J. Mater. Process. Technol., 2012, 212(10), p 2117–2127CrossRef

S.C. Lin and I.K. Chen, Drilling Carbon Fiber-Reinforced Composite Material at High Speed, Wear, 1996, 194(1–2), p 156–162

D.F. Liu, Y.J. Tang, and W.L. Cong, A Review of Mechanical Drilling for Composite Laminates, Compos. Struct., 2012, 94(4), p 1265–1279CrossRef

Y. Watanabe, E. Miura-Fujiwara, H. Sato, K. Takekoshi, H. Tsuge, T. Kaga, N. Bando, S. Yamagami, K. Kurachi, and H. Yokoyama, Fabrication of Functionally Graded Grinding Wheel by a Centrifugal Mixed-Powder Method for CFRP-Drilling Applications, Int. J. Mater. Prod. Technol., 2011, 42(1–2), p 29–45CrossRef

H. Tsuge, K. Takekoshi, S. Yamagami, T. Kaga, N. Bando, M. Kamakura, and Y. Watanabe, Novel Drilling Method for CFRP with Dual-Axes-Driving Grindstone, J. Jpn. Soc. Abrasive Technol., 2012, 56(9), p 612–617 (in Japanese)

H. Tsuge, D. Ogawa, N. Bando, T. Kaga, and Y. Watanabe, Grinding Performance of Diamond Grinding Wheels Drilling of CFRP by a Dual-Axis-Driven Mechanism, J. Jpn. Soc. Abrasive Technol., 2014, 58(3), p 168–172 (in Japanese)

T. Kunimine, H. Tsuge, D. Ogawa, M. Yamada, H. Sato, and Y. Watanabe, Drilling CFRP Laminates by Dual-axis Grinding Wheel System with Copper/Diamond Functionally Graded Grinding Wheel, J. Manuf. Sci. Eng., 2018, 140(7), p 071011-1–071011-7CrossRef

Y. Watanabe, Y. Inaguma, H. Sato, and E. Miura-Fujiwara, A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method, Materials, 2009, 2, p 2510–2525CrossRef

10.

S. El-Hadad, H. Sato, E. Miura-Fujiwara, and Y. Watanabe, Fabrication of Al/Al₃Ti Functionally Graded Materials by Reaction Centrifugal Mixed-Powder Method, Jpn. J. Appl. Phys., 2011, 50(1), p 01AJ02 (7 pages)

11.

H. Sato, A. Mizuno, Y. Mamiya, M. Yamada, and Y. Watanabe, Improvement of Bonding Force Between Abrasive Grains and Matrix in Cu/Diamond Composite Fabricated by Centrifugal Mixed-Powder Method, Mech. Eng. J., 2016, 3(6), p 16-00297 (10 pages)

12.

T. Kunimine, H. Sato, E. Miura-Fujiwara, and Y. Watanabe, Chap. 2 New Processing Routes for Functionally Graded Materials and Structures through a Combination of Powder Metallurgy and Casting, Advances in Functionally Graded Materials and Structures, F. Ebrahimi, Ed., InTech - Open Access Publisher, Rijeka, 2016, p 33–48 ISBN 978-953-51-2274-6

13.

S. Jamian, Y. Watanabe, and H. Sato, Formation of Compositional Gradient in Al/SiC FGMs Fabricated under Huge Centrifugal Forces using Solid-Particle and Mixed-Powder Methods, Ceram. Inter., 2018. https://doi.org/10.1016/j.ceramint.2018.08.315.

14.

N. Toyofuku, N. Yamasaki, Y. Kodera, M. Ohyanagi, and Z.A. Munir, Turbostatic Boron Nitride Consolidated by SPS, J. Ceram. Soc. Jpn., 2009, 117(1362), p 189–193CrossRef

15.

P. Klimczyk, P. Figiel, I. Petrusha, and A. Olszyna, Cubic Boron Nitride Based Composites for Cutting Applications, J. Achiev. Mater. Manuf. Eng., 2011, 44(2), p 198–204

16.

S.N. Monteiro, A.L.D. Skury, M.G. de Azevedo, and G.S. Bobrovnitchii, Cubic Boron Nitride Competing with Diamond as a Superhard Engineering Material—an Overview, J. Mater. Res. Technol., 2013, 2(1), p 68–74CrossRef

17.

A. Caggiano and R. Teti, CBN Grinding Performance Improvement in Aircraft Engine Components Manufacture, Procedia CIRP, 2013, 9, p 109–114CrossRef

18.

T. Kunimine, M. Shibuya, H. Sato, and Y. Watanabe, Fabrication of Copper/Diamond Functionally Graded Materials for Grinding Wheels by Centrifugal Sintered-Casting, J. Mater. Process. Technol., 2015, 217, p 294–301CrossRef

19.

P. Porion, N. Sommier, and P. Evesque, Dynamics of Mixing and Segregation Processes of Grains in 3D Blender by NMR Imaging Investigation, Europhys. Lett., 2000, 50(3), p 319–325CrossRef

20.

Y. Watanabe, S. Taniai, and H. Sato, Fabrication of Grain Refiners with High Volume Fraction of Al_2.7Fe_0.3Ti Heterogeneous Nucleation Site Particles by Spark Plasma Sintering, Jpn. J. Appl. Phys., 2019, 58(1) (in printing)

21.

Y. Omori, An Introduction to Roundness Measurement, J. Jpn. Soc. Precis. Eng., 2016, 82(9), p 803–806 (in Japanese)CrossRef

22.

M. Hotta and T. Goto, Densification and Microstructure of Al₂O₃-cBN Composites Prepared by Spark Plasma Sintering, J. Ceram. Soc. Jpn., 2008, 116(6), p 744–748CrossRef

23.

X. Wang, A. Jha, and R. Brydson, In Situ Fabrication of Al₃Ti Particle Reinforced Aluminium Alloy Metal-Matrix Composites, Mater. Sci. Eng. A, 2004, 364(1–2), p 339–345CrossRef

24.

H. Fukagawa, Processing of the Hard to Cut Materials and Heat-resistant Alloys for Aircrafts, J. Jpn Soc. Mech. Eng., 2012, 115(1128), p 762–765 (in Japanese)

25.

Daiyamondo Toishi Kenkyu-kai, Ed, Daiyamondo Toishi no Erabikata Tsukaikata, Nikkan Kogyo Shimbun, Ltd., (1988) ISBN4-526 02451-1, p 5, p 84 (in Japanese)

26.

M. Leitner, T. Leitner, A. Schmon, K. Aziz, and G. Pottlacher, Thermophysical Properties of Liquid Aluminum, Metall. Mater. Trans. A, 2017, 48(6), p 3036–3045CrossRef

Title: Fabrication of Al-Based Composites by Centrifugal Mixed-Powder Method and Their Application for Grinding Wheels
Authors: Yoshimi Watanabe
Takayasu Sugiura
Hisashi Sato
Hideaki Tsuge
Publication date: 19-02-2019
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 7/2019
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-019-03917-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2019

Effects of Particle Characteristic Parameters on the Electrical Conductivity of TiB2/Cu Composites: A Modified Model for Predicting Their Electrical Conductivity

Electrochemical Characterization of Certain Mg-Based Alloys in Artificial Perspiration Biofluid for Consumer and Industrial Applications

Effects of Holding Time on the Sintering of Cemented Tungsten Carbide Powder and Bonding with High-Strength Steel Wire

The 73rd World Foundry Congress

Main Directions of Recent Works on Al-Zn-Based Alloys for Foundry Engineering

Deformation Behavior and Microstructure Evolution of Powder Metallurgy Ti6Al4V Alloy During Hot Compression

Premium Partners