Top

Metallurgist

Published in:

21-01-2020

Features of the Effect of Microstructure Characteristics on Corrosion Resistance of Cold-Rolled High-Strength Low-Alloy Steels (HSLA) Grade 260–300 for Automobile Building

Authors: I. G. Rodionova, A. V. Amezhnov, N. G. Shaposhnikov, Y. S. Gladchenkova, D. L. D’yakonov

Published in: Metallurgist | Issue 9-10/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

An experimental study is conducted on the effect of production parameters on the corrosion resistance of cold-rolled high-strength low-alloy steels (HSLA) grade 260–300, treated in continuous annealing lines (CAL). It is been shown that corrosion resistance is mainly determined by development of ageing in overageing sections and during subsequent cooling. A reduction in strip movement and an increase of overageing temperature leads to more complete development of this process. A tendency towards ageing is also affected by hot rolling parameters, i.e., the end of rolling temperature in the roughing group of stands T6, correlating with an increase reheating temperature, and finishing rolling temperature T_er . The favorable effect of the T6 increase is probably connected with more complete dissolution of manganese sulfide during heating and formation of a larger number of submicron precipitates of manganese sulfide during rolling, which are a substrate for precipitation of aluminum nitride and cementite on their surface. With a reduction in finishing rolling temperature T_er , the end of aluminum nitride precipitation is more complete. These factors cause a reduction in nitrogen and carbon concentration ferrite and, consequently the tendency towards aging.

previous article Development and Implementation of the System for Determining the Actual Level of Metal and Thickness of Slag Mixture in the Bloom CCM Mold at JSC “OEMK”

next article Steels for Bridge Structures

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

I. G. Rodionova, É. T. Shapovalov, M. E. Kovalevskaya, O. M. Baklanova, et al., “Increase in atmospheric corrosion resistance of automobile sheet steels by optimizing chemical composition and manufacturing parameters,” Metallurg., No. 8, 46–52 (2005).

Standard ASTM G 44-80. Alternate Immersion Stress Corrosion Testing in 3.5% Sodium Chloride Solution.

É. T. Shapovalov, I. G. Rodionova, A. I. Zaitsev, M. E. Kovalevskaya, O. N. Baklanova, et al., “Factors governing corrosion resistance and other user properties of cold-rolled product,” Probl. Chern. Met. Mater., No. 3, 68–76 (2009).

I. G. Rodionova, O. N. Baklanova, A. I. Zaitsev, M. E. Marzoeva, et al., “Stucy of factors controlling corrosion resistance of microalloyed automobile sheet steels,” Probl. Chern. Met. Mater., No. 2, 45–55 (2010).

A. V. Amezhnov, I. G. Rodionova, A. I. Zaitsev, E. I. Zarkova, and M. E. Marzoeva, “Features of the effect of nonmetallic inclusions, phase precipitates on corrosion resistance of low-carbon and ultralow-carbon steels,” Probl. Chern. Met. Mater., No. 1, 58–69 (2019).

I. G. Rodionova, N. A. Karamysheva, A. A. Pavlov, A. S. Mel’nichenko, V. E. Telegin, et al., “Study of the effect of chemical composition and production parameters on the properties of cold-rolled product of low-alloy steel (type HSLA) after continuous annealing using statistical analysis methods,” Probl. Chern. Met. Mater., No. 1, 79–91 (2019).

N. P. Zhuk, Course in Corrosion and Metal Protection [in Russian], Metallurgiya, Moscow 91968).

I. G. Rodionova, N. G. Shaposhnikov, N. I. Éndel’, B. M. Mogutnov, S. V. Zhilenko, et al., “Conditions for forming nitride and sulfide phases in steels for deep drawing. II. Manganese sulfide,” Probl. Chern. Met. Mater., No. 4, 52–58 (2008).

I. G. Rodionova, I. N. Chirkina, T. M. Efimova, N. V. Skomorokhova, et al., “Materials science aspects of improving a set of properties for cold-rolled automobile rolled product in microalloyed steels,” Probl. Chern. Met. Mater., No. 1, 85–92 (2011).

10.

Yu. S. Gladchenkova, D. L. D’yakonov, I. G. Rodionova, N. G. Shaposhnikova, et al., “Conditions of forming combined precipitates and their effect on cold-rolled product properties of low-carbon steels,” Metallurg., No. 9, 43–48 (2016).

11.

C. W. Siyasiya and W. E. Stumpf, “The influence of the Sulphur content on the static recrystallization of cold worked low carbon aluminium-killed strip steels,” Mater. Sci. Eng. A,A494, 188–195 (2008).CrossRef

12.

H. Katoh, H. Takechi, N. Takahashi, and M. Abe, “Cold-rolled steel sheets produced by continuous annealing,” in: R. Pradhan (editor), Technology of Continuously Annealed Cold-Rolled Sheet Stee, Proceedings of a symposium sponsored by the Heat Treatment and Ferrous Metallurgy Committees of The Metallurgical Society of AIME and held at the TMS-AIME Fall Meeting in Detroit, Michigan, September 17–18 (1984).

13.

N. G. Shaposhnikov, B. M. Mogutnov, S. M. Polonskaya, A. P. Kolesnichenko, and P. B. Belyavskii, “Thermodynamic modeling as a tool for improving technology of ingot heating of steel 12Kh18N10T for rolling,” Materialoved, No. 11, 2–9 (2014).

14.

N. G. Shaposhnikov, I. G. Rodionova, and A. A. Pavlov, “Thermodynamic construction of corrosion-resistant steels of the austenite-martensite class intended as a bimetal cladding layer,” Metallurg., No. 12, 45–50 (2015).

15.

S. S. Guseva, V. O. Gurenko, and Yu. D. Zvarkovskii, Continuous Heats Treatment of Automobile Sheet Steel [in Russian], Metallurgiya, (1979).

16.

H. Hideo Abe and S. Satoh, “Progress of Continuous Annealing Technology for Cold-Rolled Sheet Steels and Associated Product Development,” Kawasaki Steel Technical Report, No. 22, 48–56 (1990).

17.

V. K. Babich, Yu. P. Gul’, and I. E. Dolzhenkov, Steel Strain Hardening [in Russian], Metallurgiya, Moscow (1972).

Title: Features of the Effect of Microstructure Characteristics on Corrosion Resistance of Cold-Rolled High-Strength Low-Alloy Steels (HSLA) Grade 260–300 for Automobile Building
Authors: I. G. Rodionova
A. V. Amezhnov
N. G. Shaposhnikov
Y. S. Gladchenkova
D. L. D’yakonov
Publication date: 21-01-2020
Publisher: Springer US
Published in: Metallurgist / Issue 9-10/2020
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-020-00910-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9-10/2020

Effect of the Impulsive Magnetic Field in the Course of Crystallization of Aluminum Alloys on Their Physical Properties

Effect of Structural State of Metal in Weld Fusion Zone of Large-Diameter pipes on Fracture Mechanism and Results of Crack-Resistance (CTOD) Tests

Effect of Temperature and Amount of Flux in a Charge on Structure and Phase Composition of Balkhash Copper Smelter Plant Slags

Investigation of the Effect of Ni Amount on the Wear Performance of A356 Cast Aluminum Alloys

Materials for Manufacturing Automotive Industry High-Strength Fasteners

Structure and Phase Composition of Diffusion Zone in Copper M1 + Alloy MA2-1 Composite

Premium Partners