Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Journal of Materials Engineering and Performance
Published in: Journal of Materials Engineering and Performance 5/2017

18-04-2017

Flow Behavior, Dynamic Recrystallization and Processing Map of Mg-20Pb-1.6Al-0.4B Alloy

Authors: R. Y. Li, Y. H. Duan, L. S. Ma, S. Chen

Published in: Journal of Materials Engineering and Performance | Issue 5/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Compression tests of the Mg-20Pb-1.6Al-0.4B alloy have been performed in the deformation temperature range of 240-420 °C and the strain rate range of 0.01-10 s−1. Flow behaviors were examined based on stress-strain curves and dynamic recrystallization (DRX) behaviors. The hot deformation apparent activation energy of the alloy is 147.5605 kJ/mol. The developed constitutive equation, which can be used to relate the peak stress to the absolute temperature and strain rate, was obtained. The correlation between the volume fraction of the DRX and strain at 240 °C and 0.01 s−1 was established. Processing maps of the Mg-20Pb-1.6Al-0.4B alloy at different strains are sensitive to strain. According to the processing maps and microstructures, the observed optimum parameters (temperature and strain rate) for hot working of the alloy were 300-420 °C and 0.01-0.06 s−1, respectively.
previous article Microstructure and Mechanical Properties of Fe-18Mn-18Cr-0.5N Austenitic Nonmagnetic Stainless Steel in Asymmetric Hot Rolling

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
M. Srinivasan, C. Loganathan, R. Narayanasamy, V. Senthilkumar, Q.B. Nguyen, and M. Gupta, Study on Hot Deformation Behavior and Microstructure Evolution of Cast-Extruded AZ31B Magnesium Alloy and Nanocomposite Using Processing Map, Mater. Des., 2013, 47(9), p 449–455CrossRef
2.
N. Wang, R. Wang, C. Peng, and Y. Feng, Enhancement of the Discharge Performance of AP65 Magnesium Alloy Anodes by Hot Extrusion, Corros. Sci., 2014, 81(4), p 85–95CrossRef
3.
N. Wang, R. Wang, C. Peng, Y. Feng, and B. Chen, Effect of Hot Rolling and Subsequent Annealing on Electrochemical Discharge Behavior of AP65 Magnesium Alloy as Anode for Seawater Activated Battery, Corros. Sci., 2012, 64(6), p 17–27CrossRef
4.
N. Wang, R. Wang, C. Peng, B. Peng, Y. Feng, and C. Hu, Discharge Behaviour of Mg-Al-Pb and Mg-Al-Pb-In Alloys as Anodes for Mg-Air Battery, Electrochim. Acta, 2014, 149, p 193–205CrossRef
5.
L. Wen, K. Yu, H. Xiong, Y. Dai, S. Yang, X. Qiao, F. Teng, and S. Fan, Composition Optimization and Electrochemical Properties of Mg-Al-Pb-(Zn) Alloys as Anodes for Seawater Activated Battery, Electrochim. Acta, 2016, 194, p 40–51CrossRef
6.
S. Candan, M. Unal, M. Turkmen, E. Koc, Y. Turen, and E. Candan, Improvement of Mechanical and Corrosion Properties of Magnesium Alloy by Lead Addition, J. Med. Biol. Eng., 2011, 31(4), p 233–244CrossRef
7.
N. Nishino, H. Kawahara, Y. Shimizu, and H. Iwahori, Grain Refinement of Magnesium Casting Alloys by Boron Addition. In: K.U. Kainer, Magnesium Alloys and their Applications; 2000. p. 59–64.
8.
P. Acosta, J.A. Jimenez, G. Frommeyer, and O.A. Ruano, Microstructure Characterization of an Ultrahigh Carbon and Boron Tool Steel Processed by Different Routes, Mater. Sci. Eng., A, 1996, 206(206), p 194–200CrossRef
9.
E.S.A. Waly and M.A. Bourham, Comparative Study of Different Concrete Composition as Gamma-Ray Shielding Materials, Ann. Nucl. Energy, 2015, 85, p 306–310CrossRef
10.
M. Avedesian and H. Baker, Magnesium and Magnesium Alloys, ASM International, Materials Park (OH), 1999
11.
Y.V.R.K. Prasad, K.P. Rao, and M. Gupta, Hot Workability and Deformation Mechanisms in Mg/Nano-Al2O3 Composite, Compos. Sci. Technol., 2009, 69(7–8), p 1070–1076CrossRef
12.
Y.H. Duan, Y. Sun, M.J. Peng, Z.Z. Guo, and P.X. Zhu, Microstructure Evolution and Mechanical Properties of As-Cast Pb-Mg-Al Alloys, J. Mater. Eng. Perform., 2012, 21(6), p 973–976
13.
Y.H. Duan, Hot Deformation and Processing Map of Pb-Mg-10Al-1B Alloy, J. Mater. Eng. Perform., 2013, 22(10), p 3049–3054CrossRef
14.
Y. Xu, L. Hu, and Y. Sun, Processing Map and Kinetic Analysis for Hot Deformation of an As-Cast AZ91D Magnesium Alloy, Mater. Sci. Eng., A, 2013, 578(31), p 402–407CrossRef
15.
M. Meng, Z.M. Zhang, B.H. Zhang, and J. Dou, Flow Behaviors and Processing Maps of As-Cast and As-Homogenized AZ91 Alloy, J. Alloys Compd., 2012, 513, p 112–117CrossRef
16.
F.L. Sui, L.X. Xu, L.Q. Chen, and X.H. Liu, Processing Map for Hot Working of Inconel 718 Alloy, J. Mater. Process. Technol., 2011, 211(3), p 433–440CrossRef
17.
Y. Xu, L.X. Hu, T.Q. Deng, and L. Ye, Hot Deformation Behavior and Processing Map of As-Cast AZ61 Magnesium Alloy, Mater. Sci. Eng., A, 2013, 559(3), p 528–533CrossRef
18.
S. Anbuselvan and S. Ramanathan, Hot Deformation and Processing Maps of Extruded ZE41A Magnesium Alloy, Mater. Des., 2010, 31(5), p 2319–2323CrossRef
19.
F.A. Slooff, J.S. Dzwonczyk, J. Zhou, J. Duszczyk, and L. Katgerman, Hot Workability Analysis of Extruded AZ Magnesium Alloys with Processing Maps, Mater. Sci. Eng., A, 2010, 527(3), p 735–744CrossRef
20.
Z. Cai, F. Chen, F. Ma, and J. Guo, Dynamic Recrystallization Behavior and Hot Workability of AZ41 M Magnesium Alloy During Hot Deformation, J. Alloys Compd., 2016, 670(3), p 5126–5127
21.
H. Mirzadeh, M. Roostaei, M.H. Parsa, and R. Mahmudi, Rate Controlling Mechanisms during Hot Deformation of Mg-3Gd-1Zn Magnesium Alloy: Dislocation Glide and Climb, Dynamic Recrystallization, and Mechanical Twinning, Mater. Des., 2015, 68, p 228–231CrossRef
22.
N. Tahreen, D.F. Zhang, F.S. Pan, X.Q. Jing, D.Y. Li, and D.L. Chen, Hot Deformation and Processing Map of an As-Extruded Mg-Zn-Mn-Y Alloy Containing I, and W Phases, Mater. Des., 2015, 87, p 245–255CrossRef
23.
Y. Jia, F. Cao, S. Guo, P. Ma, J. Liu, and J. Sun, Hot Deformation Behavior of Spray-Deposited Al-Zn-Mg-Cu Alloy, Mater. Des., 2014, 53(53), p 79–85CrossRef
24.
E. Cerri, E. Evangelista, A. Forcellese, and H.J. McQueen, Comparative Hot Workability of 7012 and 7075 Alloys After Different Pretreatments, Mater. Sci. Eng., A, 1995, 197(2), p 181–198CrossRef
25.
H.J. McQueen and N.D. Ryan, Constitutive Analysis in Hot Working, Mater. Sci. Eng., A, 2002, 322(1–2), p 43–63CrossRef
26.
R. Bhattacharya, B.P. Wynne, and W.M. Rainforth, Flow Softening Behavior During Dynamic Recrystallization in Mg-3Al-1Zn Magnesium Alloy, Scripta Mater., 2012, 67(3), p 277–280CrossRef
27.
C. Zener and J.H. Hollomon, Effect of Strain-Rate Upon the Plastic Flow of Steel, J. Appl. Phys., 1944, 15(1), p 22–27CrossRef
28.
Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker, Modeling of Dynamic Material Behavior in Hot Deformation: Forging of Ti-6242, Metall. Mater. Trans. A, 1984, 15(10), p 1883–1892CrossRef
29.
Y.V.R.K. Prasad, Hot Working Guide: A Compendium of Processing Map, Materials Park, ASM International (OH), 1997
30.
Y.V.R.K. Prasad and T. Seshacharyulu, Processing Maps for Hot Working of Titanium Alloys, Mater. Sci. Eng., A, 1998, 243(1), p 82–88CrossRef
31.
O. Sivakesavam and Y.V.R.K. Prasad, Hot Deformation Behavior of As-Cast Mg-2Zn-1Mn Alloy in Compression : A Study with Processing Map, Mater. Sci. Eng., A, 2003, 362(1–2), p 118–124CrossRef
32.
Y.V.R.K. Prasad and K.P. Rao, Processing Maps and Rate Controlling Mechanisms of Hot Deformation of Electrolytic Tough Pitch Copper in the Temperature Range 300–950 °C, Mater. Sci. Eng., A, 2005, 391(1–2), p 141–150CrossRef
33.
B. Bozzini and E. Cerri, Numerical Reliability of Hot Working Processing Maps, Mater. Sci. Eng., A, 2002, 328(1–2), p 344–347CrossRef
34.
S.V.S.N. Murty and B.N. Rao, On the Development of Instability Criteria During Hotworking with Reference to IN718, Mater. Sci. Eng., A, 1998, 254(1–2), p 76–82CrossRef
35.
Y.V.R.K. Prasad, Recent Advances in the Science of Mechanical Processing, Indian J. Technol., 1990, 28, p 435–451
36.
H.Z. Li, H.J. Wang, Z. Li, C.M. Liu, and H.T. Liu, Flow Behavior and Processing Map of As-Cast Mg-10Gd-4.8Y-2Zn-0.6Zr Alloy, Mater. Sci. Eng., A, 2010, 528(1), p 154–160CrossRef
37.
Y.V.R.K. Prasad and N. Ravichandran, Effect of Stacking Fault Energy on the Dynamic Recrystallization during Hot Working of FCC Metals: A Study Using Processing Maps, Bull. Mater. Sci., 1991, 14(5), p 1241–1248CrossRef
38.
B. Li, Q.L. Pan, Z.Y. Zhang, and X. Li, Characterization of Flow Behavior and Microstructural Evolution of Al-Zn-Mg-Sc-Zr Alloy Using Processing Maps, Mater. Sci. Eng., A, 2012, 556(11), p 844–848CrossRef
39.
T. Sakai and J.J. Jonas, Dynamic Recrystallization: Mechanical and Microstructural Considerations, Acta Metall., 1984, 32(2), p 189–209CrossRef
40.
M.R. Rokni, A. Zarei-Hanzaki, A.A. Roostaei, and A. Abolhasani, Constitutive Base Analysis of a 7075 Aluminum Alloy During Hot Compression Testing, Mater. Des., 2011, 32(1), p 4955–4960CrossRef
41.
H.J. Frost and M.F. Ashby, Deformation Mechanism Maps, Pergamon Press, Oxford, 1982
42.
Y.H. Duan, Y. Sun, M.J. Peng, and Z.Z. Guo, First Principles Investigation of the Binary Intermetallics in Pb-Mg-Al Alloy: Stability, Elastic Properties and Electronic Structure, Solid State Sci., 2011, 13(2), p 455–459CrossRef
43.
S. Mandal, V. Rakesh, P.V. Sivaprasad, S. Venugopal, and K.V. Kasiviswanathan, Constitutive Equations to Predict High Temperature Flow Stress in a Ti-Modified Austenitic Stainless Steel, Mater. Sci. Eng., A, 2009, 500(1–2), p 114–121CrossRef
44.
Y.C. Lin, M.S. Chen, and J. Zhong, Constitutive Modeling for Elevated Temperature Flow Behavior of 42 CrMo Steel, Comput. Mater. Sci., 2008, 42(3), p 470–477CrossRef
45.
N.D. Ryan and H.J. McQueen, Dynamic Softening Mechanisms in 304 Austenitic Stainless Steel, Can. Metall. Q., 1990, 29(2), p 147–162CrossRef
46.
M.E. Wahabi, L. Gavard, F. Montheillet, J.M. Cabrera, and J.M. Prado, Effect of Initial Grain Size on Dynamic Recrystallization in High Purity Austenitic Stainless Steels, Acta Mater., 2005, 53(17), p 4605–4612CrossRef
47.
M.R. Barnett, G.L. Kelly, and P.D. Hodgson, Predicting the Critical Strain for Dynamic Recrystallization Using the Kinetics of Static Recrystallization, Scripta Mater., 2000, 43(4), p 365–369CrossRef
48.
S.H. Zahiri, C.H.J. Davies, and P.D. Hodgson, A Mechanical Approach to Quantify Dynamic Recrystallization in Polycrystalline Metals, Scripta Mater., 2005, 52(4), p 299–304CrossRef
49.
S.F. Medina and C.A. Hernandez, Modelling of the Dynamic Recrystallization of Austenite in Low Alloy and Microalloyed Steels, Acta Mater., 1996, 44(44), p 165–171CrossRef
50.
A. Avrami, Kinetics of Phase Change. I: General Theory, J. Chem. Phys., 1939, 7(12), p 1103–1112CrossRef
51.
A. Marchattiwar, A. Sarkar, J.K. Chakravartty, and B.P. Kashyap, Dynamic Recrystallization During Hot Deformation of 304 Austenitic Stainless Steel, J. Mater. Eng. Perform., 2013, 22(8), p 2168–2175
52.
Y.V.R.K. Prasad and T. Seshacharyulu, Modelling of Hot Deformation for Microstructural Control, Int. Mater. Rev., 1998, 43(6), p 243–258CrossRef
53.
L.Y. Zeng, G.J. Yang, P. Ge, X.N. Mao, Y.Q. Zhao, and L. Zhou, Processing Map of One Kind of Metastable β Titanium Alloy, Rare Met. Mater. Eng., 2010, 39(9), p 1505–1508CrossRef
Metadata
Title
Flow Behavior, Dynamic Recrystallization and Processing Map of Mg-20Pb-1.6Al-0.4B Alloy
Authors
R. Y. Li
Y. H. Duan
L. S. Ma
S. Chen
Publication date
18-04-2017
Publisher
Springer US
Published in
Journal of Materials Engineering and Performance / Issue 5/2017
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-017-2681-z

Other articles of this Issue 5/2017

Journal of Materials Engineering and Performance 5/2017 Go to the issue

OriginalPaper

Enhancing Friction Stir Weldability of 6061-T6 Al and AZ31B Mg Alloys Assisted by External Non-rotational Shoulder

OriginalPaper

Effect of Load and Sliding Rate on the Wear Behavior of Ti-Containing TWIP Steel

OriginalPaper

Copper Corrosion Under Non-uniform Magnetic Field in 0.5 M Hydrochloric Acid

OriginalPaper

Hardness, Electrical Conductivity and Thermal Stability of Externally Oxidized Cu-Al2O3 Composite Processed by SPD

OriginalPaper

Microbial Activities’ Influence on Three Kinds of Metal Material Corrosion Behaviors

OriginalPaper

Effects of Friction Layer Thickness on the Tribological Performance of Ni3Al-Ag-MoO3

Premium Partners

    Image Credits