Top

Journal of Materials Engineering and Performance

Published in:

27-10-2020

Influence of Surface Nanocrystallization and Partial Amorphization Induced by Ultrasonic Shot Peening on Surface Properties of 7075 Aluminum Alloy

Authors: Lihua Zhu, Yanjin Guan, Zongshen Wang, Hongyu Zheng, Jun Lin, Jiqiang Zhai, Zhendong Xie

Published in: Journal of Materials Engineering and Performance | Issue 11/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This paper investigates the influence of ultrasonic shot peening (USP) on the surface microstructure, hardness, roughness, and corrosion resistance of 7075 aluminum alloy. After the USP treatment, both surface nanocrystallization and partial surface amorphization of 7075 aluminum alloy were observed by XRD, SEM, and TEM methods. The results showed that the average surface grain size was refined to about 30 nm, while maximal surface amorphization percentage reached 43.68%. Both surface hardness and roughness increased with the peening duration, and their interplay was discussed. The maximal surface hardness achieved in this work was 249.60 HV, which is 46% higher compared to the original specimen. Besides, corrosion resistance initially increased with the peening duration and then decreased when the peening duration exceeded 200 s. The influence of both surface microstructure and roughness on the corrosion resistance was also analyzed.

previous article Dynamic Recovery and Recrystallization Behaviors of C71500 Copper-Nickel Alloy Under Hot Deformation

next article Microstructure and Compressive Behavior of Ti-6Al-4V Alloy Built by Electron Beam Free-Form Fabrication

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, and A. Vieregge, Recent Development in Aluminium Alloys for the Automotive Industry, Mater. Sci. Eng. A, 2000, 280, p 37–49

A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W.S. Miller, Recent Development in Aluminium Alloys for Aerospace Applications, Mater. Sci. Eng. A, 2000, 280, p 102–107

K. Lu and J. Lu, Surface Nanocrystallization (SNC) of Metallic Materials-Presentation of the Concept Behind a New Approach, J. Mater. Sci. Technol., 1999, 15, p 193–197

S. Zhang, H. Chen, and Q. Lin, Surface Nanocrystallization of Commercial Pure Titanium Induced by SMAT and Its Properties, J. Mater. Sci. Technol., 2004, 20, p 716–718

O. Unal, A. Cahit Karaoglanli, R. Varol, and A. Kobayashi, Microstructure Evolution and Mechanical Behavior of Severe Shot Peened Commercially Pure Titanium, Vacuum, 2014, 110, p 202–206

X. Wu, N. Tao, Y. Hong, B. Xu, J. Lu, and K. Lu, Microstructure and Evolution of Mechanically-Induced Ultrafine Grain in Surface Layer of AL-Alloy Subjected to USSP, Acta Mater., 2002, 50, p 2075–2084

N.I. Khripta, O.P. Karasevska, and B.N. Mordyuk, Surface Layers of Zr-18%Nb Alloy Modified by Ultrasonic Impact Treatment: Microstructure, Hardness and Corrosion, J. Mater. Eng. Perform., 2017, 26, p 5446–5455

B.N. Mordyuk, G.I. Prokopenko, M.A. Vasylyev, and M.O. Iefimov, Effect of Structure Evolution Induced by Ultrasonic Peening on the Corrosion Behavior of AISI-321 Stainless Steel, Mater. Sci. Eng. A, 2007, 458, p 253–261

Q. Wang, Y. Yin, Q. Sun, L. Xiao, and J. Sun, Gradient Nano Microstructure and Its Formation Mechanism in Pure Titanium Produced by Surface Rolling Treatment, J. Mater. Res., 2014, 29, p 569–577

10.

Y.K. Zhang, J.Z. Lu, X.D. Ren, H.B. Yao, and H.X. Yao, Effect of Laser Shock Processing on the Mechanical Properties and Fatigue Lives of the Turbojet Engine Blades Manufactured by LY2 Aluminum Alloy, Mater. Des., 2009, 30, p 1697–1703

11.

J. Lu, Proceedings of the Fourth International Conference on Residual Stresses., Baltimore, 1994, pp. 1154.

12.

N.R. Tao, M.L. Sui, J. Lu, and K. Lua, Surface Nanocrystallization of Iron Induced by Ultrasonic Shot Peening, Nanostruct. Mater., 1999, 11, p 433–440

13.

V.O. Abramov, O.V. Abramov, F. Sommer, O.M. Gradov, and O.M. Smirnov, Surface Hardening of Metals by Ultrasonically Accelerated Small Metal Balls, Ultrasonics, 1998, 36, p 1013–1019

14.

G. Liu, J. Lu, and K. Lu, Surface Nanocrystallization of 316L Stainless Steel Induced by Ultrasonic Shot Peening, Mater. Sci. Eng. A, 2000, 286, p 91–95

15.

K. Li, Y. He, C. Fang, H. Ma, J. Kim, H.S. Lee, J.I. Song, C.W. Yang, J.H. Lee, and K. Shin, Surface Nanocrystallization of Pure Cu Induced by Ultrasonic Shot Peening, J. Nanosci. Nanotechnol., 2014, 14, p 9637–9643

16.

L. Zhu, Y. Guan, Y. Wang, Z. Xie, and J. Lin, Influence of Process Parameters of Ultrasonic Shot Peening on Surface Nanocrystallization and Hardness of Pure Titanium, Int. J. Adv. Manuf. Technol., 2017, 89, p 1451–1468

17.

V. Pandey, G.S. Rao, K. Chattopadhyay, N.C. Santhi Srinivas, and V. Singh, Effect of Surface Nanostructuring on LCF Behavior of Aluminum Alloy 2014, Mater. Sci. Eng. A, 2015, 64, p 7201–7211

18.

V. Pandey, K. Chattopadhyay, N.C. Santhi Srinivas, and V. Singh, Role of Ultrasonic Shot Peening on Low Cycle Fatigue Behavior of 7075 Aluminium Alloy, Int. J. Fatigue, 2017, 103, p 426–435

19.

V. Pandey, J.K. Singh, K. Chattopadhyay, N.C.S. Srinivas, and V. Singh, Influence of Ultrasonic Shot Peening on Corrosion Behavior of 7075 Aluminum Alloy, J. Alloy. Compd., 2017, 723, p 826–840

20.

L. Zhu, Y. Guan, J. Lin, J. Zhai, and Z. Xie, A Nanocrystalline-Amorphous Mixed Layer Obtained by Ultrasonic Shot Peening on Pure Titanium at Room Temperature, Ultrason. Sonochem., 2018, 47, p 68–74

21.

L. Zhu, Y. Guan, J. Lin, J. Zhai, and Z. Xie, The enhanced Thermal Stability of the Nanocrystalline-Amorphous Composite Layer on Pure Titanium Induced by Ultrasonic Shot Peening, J. Alloy. Compd., 2019, 791, p 1063–1069

22.

L. Zhu, Y. Guan, Z. Wang, J. Lin, J. Zhai, and Z. Xie, Influence of Nanocrystalline-Amorphous Composite Layer on Tensile Properties of Pure Titanium, J. Mater. Eng. Perform., 2020, 29, p 819–831

23.

D.V. Louzguine-Luzgin, J. Jiang, A.I. Bazlov, V.S. Zolotorevzky, H. Mao, Y.P. Ivanov, and A.L. Greer, Phase Separation Process Preventing Thermal Embrittlement of a Zr-Cu-Fe-Al Bulk Metallic Glass, Scripta Mater., 2019, 167, p 31–36

24.

R. Jiang, H. Li, Z. Li, and L. He, Fabrication of Zr-Based Bulk Metallic Glass/Aluminum Alloy Multi-Materials by Stacking Extrusion, Vacuum, 2018, 149, p 79–82

25.

Y. Wu, H. Wang, H.H. Wu, Z.Y. Zhang, X.D. Hui, G.L. Chen, D. Ma, X.L. Wang, and Z.P. Lu, Formation of Cu–Zr–Al Bulk Metallic Glass Composites with Improved Tensile Properties, Acta Mater., 2011, 59, p 2928–2936

26.

W. Zhou, H. Li, Z. Li, X. Zhu, and L. He, Bonding of Zr44Ti11Cu10Ni10Be25 bulk metallic glass and AZ31B Magnesium Alloy by Hot Staking Extrusion, Vacuum, 2019, 166, p 240–247

27.

J. Marteau, M. Bigerelle, P.E. Mazeran, and S. Bouvier, Relation Between Roughness and Processing Conditions of AISI, 316L Stainless Steel Treated by Ultrasonic Shot Peening, Tribol. Int., 2014, 82, p 319–329

28.

S. Curtis, E.R. De Los Rios, C.A. Rodopoulos, and A. Levers, Analysis of the Effects of Controlled Shot Peening on Fatigue Damage of High Strength Aluminium Alloys, Int. J. Fatigue, 2003, 25, p 59–66

29.

J.Y. Martin, Z. Schwartz, T.W. Hummert, D.M. Schraub, J. Simpson, J. Lankford, D.D. Dean, D.L. Cochran, and B.D. Boyan, Effect of Titanium Surface Roughness on Proliferation, Differentiation, and Protein Synthesis of Human Osteoblast-Like Cells (MG63), J. Biomed. Mater. Res., 1995, 29, p 389–401

30.

Y. Guo, B. Hu, C. Tang, Y. Wu, P. Sun, X. Zhang, and Y. Jia, Increased Osteoblast Function In Vitro and In Vivo Through Surface Nanostructuring by Ultrasonic Shot Peening, Int. J. Nanomed., 2015, 10, p 4593–4603

31.

H.Y. Miao, S. Larose, C. Perron, and M. Lévesque, On the Potential Applications of a 3D Random Finite Element Model for the Simulation of Shot Peening, Adv. Eng. Softw., 2009, 40, p 1023–1038

32.

B. Arifvianto, M. Suyitno, P. Mahardika, P.T. Dewo, and U.A. Iswanto, Salim, Effect of Surface Mechanical Attrition treatment (SMAT) on Microhardness, Surface Roughness and Wettability of AISI, 316L, Mater. Chem. Phys., 2011, 125, p 418–426

33.

Y. Li and F.H. Wang, Effects of Surface Nanocrystallization on the Electrochemical Corrosion Behavior of Metals, Corr. Protect., 2003, 24, p 6–12

34.

L. Zhu, Y. Guan, Y. Wang, Z. Xie, J. Lin, and J. Zhai, Influence of Process Parameters of Ultrasonic Shot Peening on Surface Roughness and Hydrophilicity of Pure Titanium, Surf. Coat. Technol., 2017, 317, p 38–53

35.

Q. Sun, Q. Han, X. Liu, W. Xu, and J. Li, The Effect of Surface Contamination on Corrosion Performance of Ultrasonic Shot Peened 7150 Al Alloy, Surf. Coat. Technol., 2017, 328, p 469–479

36.

Q. Sun, X. Liu, Q. Han, J. Li, R. Xu, and K. Zhao, A Comparison of AA2024 and AA7150 Subjected to Ultrasonic Shot Peening: Microstructure, Surface Segregation and Corrosion, Surf. Coat. Technol., 2018, 337, p 552–560

37.

V. Pandey, J.K. Singh, K. Chattopadhyay, N.C.S. Srinivas, and V. Singh, Optimization of USSP Duration for Enhanced Corrosion Resistance of AA7075, Ultrasonics, 2019, 91, p 180–192

38.

B. Yoo, K.R. Shin, D.Y. Hwang, H.L. Dong, and H.S. Dong, Effect of Surface Roughness On Leakage Current and Corrosion Resistance of Oxide Layer on AZ91 Mg alloy Prepared by Plasma Electrolytic Oxidation, Appl. Surf. Sci., 2010, 256, p 6667–6672

39.

T. Balusamy, S. Kumar, and T.S.N.S. Narayanan, Effect of Surface Nanocrystallization on the Corrosion Behaviour of AISI, 409 Stainless Steel, Corr. Ence, 2010, 52, p 3826–3834

40.

Y. Wei, L. Ying, and F. Wang, The Improvement of the Corrosion Resistance of 309 Stainless Steel in the Transpassive Region by Nano-Crystallization, Electrochim. Acta, 2009, 54, p 1339–1349

41.

M.M. Trexler and N.N. Thadhani, Mechanical Properties of Bulk Metallic Glasses, Prog. Mater Sci., 2010, 55, p 759–839

42.

U. Trdan and J. Grum, Evaluation of Corrosion Resistance of AA6082-T651 Aluminium Alloy After Laser Shock Peening by Means of Cyclic Polarisation and ElS Methods, Corr. Ence, 2012, 59, p 324–333

43.

S.J. Lee and J.J. Lai, The Effects of Electropolishing (EP) Process Parameters on Corrosion Resistance of 316L Stainless Steel, J. Mater. Process. Technol., 2003, 140, p 206–210

44.

T. Hong and M. Nagumo, Effect of Surface Roughness on Early Stages of Pitting Corrosion of Type 301 Stainless Steel, Corros. Sci., 1997, 39, p 1665–1672

45.

W.B. Li, Q.L. Pan, Y.P. Xiao, Y.B. He, and X.Y. Liu, Corrosion Behaviors and Electrochemical Impedance Spectroscopy Features of Al-Zn-Cu-Mg-Zr aLloy Containing Sc, J. Central South Univ., 2011, 42, p 2642–2650

46.

N. Li, Y. Li, S. Wang, and F. Wang, Corrosion behavior of nanocrystallized bulk 304 stainless steel II, Protection of the passive film, J. Chin. Soc. Corr. Protect., 2007, 27, p 142–146

Title: Influence of Surface Nanocrystallization and Partial Amorphization Induced by Ultrasonic Shot Peening on Surface Properties of 7075 Aluminum Alloy
Authors: Lihua Zhu
Yanjin Guan
Zongshen Wang
Hongyu Zheng
Jun Lin
Jiqiang Zhai
Zhendong Xie
Publication date: 27-10-2020
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 11/2020
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-05219-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11/2020

Fretting Wear of Co-Cr-Mo Alloys at Elevated Temperatures

Heterogeneous Microstructure of Low-Carbon Microalloyed Steel and Mechanical Properties

Effects of Cryogenic Milling on Stress Corrosion Cracking Resistance of AISI 316L Austenitic Stainless Steel

Microstructure and Tensile Strength of AA6082 T-joints by Corner Stationary Shoulder Friction Stir Welding: Effect of Tool Rotation Speed

Mode-I Fracture Investigations of Pressure Vessel Steels: Experimental and Simulation Study

Mechanical and High-Temperature Tribological Properties of Cr3C2-NiCr/TiN Duplex Coating

Premium Partners