Top

Published in:

13-06-2018 | Full Research Article

Influence of the additivation of graphene-like materials on the properties of polyamide for Powder Bed Fusion

Authors: J. J. Relinque, M. G. García-Romero, J. Hernández-Saz, J. Navas, A. J. Gil-Mena, D. L. Sales, F. J. Navas, G. Morales-Cid, D. Aguilera, A. Periñán, F. Lasagni, S. I. Molina

Published in: Progress in Additive Manufacturing | Issue 4/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The purpose of this work is to achieve the improvement of mechanical properties of polyamide 12 through dispersion of graphene-like nanofillers, for its use in Powder Bed Fusion. Nanocomposites have been prepared by conventional injection moulding in order to determine the mechanical and electrical behaviour of the different systems as a previous step for the design of new materials for Powder Bed Fusion. Structural characterisation and mechanical and electrical properties assessments were performed, showing the improvement of stiffness and mechanical strength for the prepared nanocomposites, compared to pristine polyamide. Electrical conductivity has been introduced as well in some of them. This enhancement of properties, together with the first tests carried out on nanocomposites prepared with Powder Bed Fusion, makes this study a starting point to obtain commercially interesting materials for this additive manufacturing technique.

previous article Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers

next article Multi-layer cryolithography for additive manufacturing

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Goodridge RD, Shofner ML, Hague RJM et al (2011) Processing of a Polyamide-12/carbon nanofibre composite by laser sintering. Polym Test 30:94–100. https://doi.org/10.1016/j.polymertesting.2010.10.011 CrossRef

Gibson I, Rosen DW, Stucker B (2010) Additive manufacturing technologies: rapid prototyping to direct digital manufacturing, Springer, New YorkCrossRef

Hague R, Mansour S, Saleh N (2004) Material and design considerations for rapid manufacturing. Int J Prod Res 42:4691–4708. https://doi.org/10.1080/00207840410001733940 CrossRef

Hopkinson N, Hague RJM, Dickens PM (2006) Rapid manufacturing: an industrial revolution for the digital age. Wiley, New Jersey

Bergmann C, Lindner M, Zhang W et al (2010) 3D printing of bone substitute implants using calcium phosphate and bioactive glasses. J Eur Ceram Soc 30:2563–2567. https://doi.org/10.1016/j.jeurceramsoc.2010.04.037 CrossRef

Liu FR, He C, Chen JM (2013) Modeling of the beam transportation behavior in selective laser transmission sintering the translucent core–shell composite powder. Int J Mach Tools Manuf 65:22–28. https://doi.org/10.1016/j.ijmachtools.2012.10.002 CrossRef

Murphy SV, Atala A (2014) 3D bioprinting of tissues and organs. Nat Biotechnol 32:773CrossRef

Brandl E, Palm F, Michailov V et al (2011) Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire. Mater Des 32:4665–4675. https://doi.org/10.1016/j.matdes.2011.06.062 CrossRef

Peters M, Kumpfert J, Ward CH, Leyens C (2003) Titanium alloys for aerospace applications. Adv Eng Mater 5:419–427. https://doi.org/10.1002/adem.200310095 CrossRef

10.

Short DB (2015) Use of 3D printing by museums: educational exhibits, artifact education, and artifact restoration. 3D Print Addit Manuf 2:209–215. https://doi.org/10.1089/3dp.2015.0030 CrossRef

11.

Campbell TA, Ivanova OS (2013) 3D printing of multifunctional nanocomposites. Nano Today 8:119–120. https://doi.org/10.1016/j.nantod.2012.12.002 CrossRef

12.

Wang X, Jiang M, Zhou Z et al (2017) 3D printing of polymer matrix composites: a review and prospective. Compos Part B Eng 110:442–458. https://doi.org/10.1016/j.compositesb.2016.11.034 CrossRef

13.

Haghi AK, Zaikov GE (2013) Update on nanofillers in nanocomposites: from introduction to application. Smithers Rapram, Shrewsbury

14.

Winey KI, Vaia RA (2007) Polymer nanocomposites. MRS Bull 32:314–322. https://doi.org/10.1557/mrs2007.229 doiCrossRef

15.

Fukushima H, Drzal LT, Rook BP, Rich MJ (2006) Thermal conductivity of exfoliated graphite nanocomposites. J Therm Anal Calorim 85:235–238. https://doi.org/10.1007/s10973-005-7344-x CrossRef

16.

Inuwa IM, Hassan A, Samsudin SA et al (2014) Mechanical and thermal properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites. Polym Compos 35:2029–2035. https://doi.org/10.1002/pc.22863 CrossRef

17.

Park S, Ruoff RS (2009) Chemical methods for the production of graphenes. Nat Nanotechnol 4:217–224. https://doi.org/10.1038/nnano.2009.58 CrossRef

18.

Sengupta R, Bhattacharya M, Bandyopadhyay S, Bhowmick AK (2011) A review on the mechanical and electrical properties of graphite and modified graphite reinforced polymer composites. Prog Polym Sci 36:638–670. https://doi.org/10.1016/j.progpolymsci.2010.11.003 CrossRef

19.

Meng L-Y, Park S-J (2012) Preparation and characterization of reduced graphene nanosheets via pre-exfoliation of graphite flakes. Bull Korean Chem Soc 33:209–214. https://doi.org/10.5012/bkcs.2012.33.1.209 CrossRef

20.

Cho D, Lee S, Yang G et al (2005) Dynamic mechanical and thermal properties of phenylethynyl-terminated polyimide composites reinforced with expanded graphite nanoplatelets. Macromol Mater Eng 290:179–187. https://doi.org/10.1002/mame.200400281 CrossRef

21.

Li B, Zhong W-H (2011) Review on polymer/graphite nanoplatelet nanocomposites. J Mater Sci 46:5595–5614. https://doi.org/10.1007/s10853-011-5572-y CrossRef

22.

Safarpour M, Khataee A, Vatanpour V (2015) Thin film nanocomposite reverse osmosis membrane modified by reduced graphene oxide/TiO₂ with improved desalination performance. J Memb Sci 489:43–54. https://doi.org/10.1016/j.memsci.2015.04.010 CrossRef

23.

Stankovich S, Dikin DA, Piner RD et al (2007) Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide. Carbon N Y 45:1558–15650. https://doi.org/10.1016/j.carbon.2007.02.034 CrossRef

24.

Peponi L, Puglia D, Torre L et al (2014) Processing of nanostructured polymers and advanced polymeric based nanocomposites. Mater Sci Eng R Reports 85:1–46. https://doi.org/10.1016/j.mser.2014.08.002 CrossRef

25.

Murariu M, Dechief AL, Bonnaud L et al (2010) The production and properties of polylactide composites filled with expanded graphite. Polym Degrad Stab 95:889–900. https://doi.org/10.1016/j.polymdegradstab.2009.12.019 CrossRef

26.

Yasmin A, Luo J-J, Daniel IM (2006) Processing of expanded graphite reinforced polymer nanocomposites. Compos Sci Technol 66:1182–1189. https://doi.org/10.1016/j.compscitech.2005.10.014 CrossRef

27.

Athreya SR, Kalaitzidou K, Das S (2011) Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding. Compos Sci Technol 71:506–510. https://doi.org/10.1016/j.compscitech.2010.12.028 CrossRef

28.

Eyholzer C, Tingaut P, Zimmermann T, Oksman K (2012) Dispersion and reinforcing potential of carboxymethylated nanofibrillated cellulose powders modified with 1-hexanol in extruded poly(lactic acid) (PLA) composites. J Polym Environ 20:1052–1062. https://doi.org/10.1007/s10924-012-0508-4 CrossRef

29.

Wojtala A, Szablicki D, Semeniuk I et al (2015) Composites of ethylene-vinyl acetate copolymers with modified magnesium hydroxide-thermo-oxidative ageing. Fire Mater 39:585–599. https://doi.org/10.1002/fam.2258 CrossRef

30.

Chen G-H, Wu D-J, Weng W-G, Yan W-L (2001) Preparation of polymer/graphite conducting nanocomposite by intercalation polymerization. J Appl Polym Sci 82:2506–2513. https://doi.org/10.1002/app.2101 CrossRef

31.

Stichel T, Frick T, Laumer T et al (2017) A round Robin study for selective laser sintering of polyamide 12: microstructural origin of the mechanical properties. Opt Laser Technol 89:31–40. https://doi.org/10.1016/j.optlastec.2016.09.042 CrossRef

Title: Influence of the additivation of graphene-like materials on the properties of polyamide for Powder Bed Fusion
Authors: J. J. Relinque
M. G. García-Romero
J. Hernández-Saz
J. Navas
A. J. Gil-Mena
D. L. Sales
F. J. Navas
G. Morales-Cid
D. Aguilera
A. Periñán
F. Lasagni
S. I. Molina
Publication date: 13-06-2018
Publisher: Springer International Publishing
Published in: Progress in Additive Manufacturing / Issue 4/2018
Print ISSN: 2363-9512
Electronic ISSN: 2363-9520
DOI: https://doi.org/10.1007/s40964-018-0056-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2018

Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers

Inkjet 3D printing of clay ceramics for water treatment

Editorial PIAM October 2018

Multi-layer cryolithography for additive manufacturing

Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid

Effect of fused deposition modeling process parameters on the mechanical properties of a filled polypropylene

Premium Partners