Skip to main content


International Journal of Material Forming

International Journal of Material Forming 4/2019

Issue 4/2019

Table of Contents ( 17 Articles )

27-07-2018 | Original Research | Issue 4/2019

Effects of material and process parameters on in-situ consolidation

Angel Leon, Clara Argerich, Anais Barasinski, Eric Soccard, Francisco Chinesta

20-07-2018 | Original Research | Issue 4/2019

Influence of strain parameters at rolling on the properties of wire-reinforced aluminium composites

Yaroslav Frolov, Mykhailo Stolbchenko, Olexandr Grydin, Hanna Makeeva, Michael A. Tershakovec, Mirko Schaper

20-07-2018 | Original Research | Issue 4/2019

The effects of pressure control technique on hot gas blow forming of Mg AZ31 sheets

Mohammad A. Nazzal, Abdul Ghani Al Sabouni

06-08-2018 | Original Research | Issue 4/2019

Adaptive metamodel-assisted shape optimization for springback in metal forming processes

Van-Tuan Dang, Carl Labergère, Pascal Lafon

30-07-2018 | Original Research | Issue 4/2019 Open Access

Investigation of the effect of forming parameters in incremental sheet forming using a micromechanics based damage model

Shakir Gatea, Bin Lu, Jun Chen, Hengan Ou, Graham McCartney

14-09-2018 | Original Research | Issue 4/2019

Optimum clearance determination in blanking coarse-grained non-oriented electrical steel sheets: experiment and simulation

Ji He, Zhe Wang, Shuhui Li, Liang Dong, Xudong Cao, Weigang Zhang

18-08-2018 | Original Research | Issue 4/2019

On the study of mystical materials identified by indentation on power law and Voce hardening solids

L. Meng, P. Breitkopf, B. Raghavan, G. Mauvoisin, O. Bartier, X. Hernot

08-08-2018 | Original Research | Issue 4/2019

Predictive and control models of the spring-back in thick hull plate forming

Lin-Zhi Xu, Wei Shen, Ren-jun Yan

27-09-2018 | Original Research | Issue 4/2019

An EIGA driven coupled of electromagnetic-thermal field modeling in the induction melting process

Feng Shan, Min Xia, Chang-Chun Ge

11-09-2018 | Original Research | Issue 4/2019

Single point incremental forming of AA6061 thin sheet: calibration of ductile fracture models incorporating anisotropy and post forming analyses

Shamik Basak, K. Sajun Prasad, Ajay M. Sidpara, Sushanta Kumar Panda

18-08-2018 | Original Research | Issue 4/2019

Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension

Hamed Mirzadeh

27-09-2018 | Original Research | Issue 4/2019

Modelling strategies and FEM approaches to characterize micro-sandwich sheets with unknown core properties

Anthony Michael Fernandes Pimentel, José Luís de Carvalho Martins Alves, Nuno Miguel de Seabra Merendeiro, Tiago Soares

17-09-2018 | Original Research | Issue 4/2019

Numerical modeling of local capillary effects in porous media as a pressure discontinuity acting on the interface of a transient bi-fluid flow

Koloina Andriamananjara, Nicolas Moulin, Julien Bruchon, Pierre-Jacques Liotier, Sylvain Drapier

02-10-2018 | Original Research | Issue 4/2019

A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals

Omid Majidi, Mohammad Jahazi, Nicolas Bombardier

02-10-2018 | Original Research | Issue 4/2019

An extension of Rice localization criterion to predict the onset of shear localization in semi-solid materials

M. H. Sheikh-Ansari, M. Aghaie-Khafri

17-10-2018 | Original Research | Issue 4/2019

Hybrid constitutive modeling: data-driven learning of corrections to plasticity models

Rubén Ibáñez, Emmanuelle Abisset-Chavanne, David González, Jean-Louis Duval, Elias Cueto, Francisco Chinesta

17-10-2018 | Original Research | Issue 4/2019

Process-induced defects in an L-shape profile ring rolling process

Il Yeong Oh, Tae Woo Hwang, Young Yoon Woo, Hye Jeong Yun, Young Hoon Moon

Current Publications

Premium Partners

    Image Credits