Top

Metallurgist

Published in:

04-04-2021

Investigation of Mechanical Alloying for Powder Materials Based on Mo–Ti–Zr–C and Mo–Hf–C Systems

Published in: Metallurgist | Issue 11-12/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Powders of composite materials based on Mo–Ti–Zr–C and Mo–Hf–C systems are prepared by a mechanical alloying method. Evolution of the grain size composition of powders based on the Mo–Ti–Zr–C and Mo–Hf–C systems is considered at various stages of mechanical alloying. Alloying element distribution and microstructure of composite powders based on the Mo–Ti–Zr–C and Mo–Hf–C systems are investigated. The contents of oxygen and zirconium that appeared in the powders during mechanical alloying are determined.

previous article Effect of Alloyed Coating Composition on Composite Casting Surface Layer Properties

next article Study of Conditions for Thermal Deformation of Additively Grown Billets from VT6 Titanium Alloy using Finite Element Simulation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. N. Kablov, “Strategic areas for materials and technology and their processing in the period up to 2030,” Aviats. Mater. Tekhnol., No. S, 7–17 (2012)

E. N. Kablov, “Innovative developments of FGUP VIAM GNTs RF for implementing “Strategic areas for materials and technology and their processing in the period up to 2030,” Aviats. Mater. Tekhnol., No. 1, (34), 3–33 (2015); https://doi.org/10.18577/2071-9140-2015-0-1-3-33.

E. N. Kablov, “VIAM: new generation of materials for PD14,” Kryl’ya Rodiny, No. 7-8, 54–58 (2019).

N. N. Morgunova, B. A. Klypin, V. A. Boyashinov, L. A. Tarakanov, and Yu. V. Manegin, Molybdenum Alloys [in Russian], Metallurgiya, Moscow (1975).

C. Pöhl, J. Schatte, and H. Leitner, “Metallographic characterization of the molybdenum based alloy MHC by a color etching technique,” Mater. Charact., 77, 63–69 (2013).CrossRef

B. N. Babich, “Precipitation hardening and mechanical alloying — new ways of creating high-temperature aviation material,” in: Aviation Materials at the Threshold of the XX-XXI Centuries [in Russian], VIAM Moscow (1994).

V. T. Batienkov and R. V. Batienkov, Study of the effect of vibration treatment of porous sintered materials on structure and properties of a surface layer of hot-stamped powder objects,” Metallurg, No. 6, 88–93 (2019).

V. T. Batienkov, “Vibration mechanical treatment of porous sintered materials,” Izv. Vuz. Sev. Kavkaz. Region. Tekhn. Nauki, No. 4, 51–55 (2001).

S. G. Seferov and V. T. Batienkov, Materoials Science: Teaching aid [in Russian], Izd. RIOR, Moscow (2007).

10.

Yu. G. Dorofeev, V. T. Batienkov, M. A. Rodionov, L. B. Kulikovskaya, and N. N. Venzik, USSR Inventor’s Cert. 1682037 А1, Method for hot stamping porous workpieces and device for its accomplishment, Claim 03.28.1989; Publ. 10.07.1991, Bull No. 37.

11.

I. Yu. Efimochkin, B. V. Shchetanov, S. V. Paégle, and R. M. Dvoretskov, “Study of features of mechanical alloying during synthesis in-situ of composites based on refractory metals,” Trudy VIAM Élektron. Nauch.-Tekhn. Zh., No. 4 (64), 38–50 (2018); URL: http://www.viam-works.ru (access date 29.07.2020); https://doi.org/10.18577/2307-6046-2018-0-4-38-50.

12.

R. V. Batienkov, A. N. Bol’shakova, and I. Yu. Efimochkin, “problem of low-temperature ductility of molybdenum and alloys based upon it (review),” Trudy VIAM Élektron. Nauch.-Tekhn. Zh., No. 3(63), Art. 02 (2018); URL: http://www.viam-works.ru (access date 29.07.2020); DOI: https://doi.org/10.18577/2307-6046-2018-0-3-12-17).

13.

N. N. Trofimenko, I. Yu. Efimochkin, and A. N. Bol’shakova, “Problems of creating and application prospects for using heat-resistant high entropy alloys,” Aviats. Mater. Tekhnol., No. 2, 3–8 (2018); https://doi.org/10.18577/20719140-2018-0-2-3-8.

14.

N. N. Trofimenko, I. Yu. Efimochkin, I. V. Osin, and R. M. Dvoretskov, “Study of the possibility of preparing high entropy alloy VNbMoTaW by mixing elemental powders with subsequent compaction by hybrid spark plasma sintering,” Aviats. Mater. Tekhnol., No. 2, 12–20 (2019); https://doi.org/10.18577/20719140-2019-0-2-12-20.

15.

E. G. Avakumov, Mechanical Methods for Activating Chemical Processes, 2^nd ed. (A. S. Kolosov, editor) [in Russian], Nauka, Novosibirsk (1986).

16.

D. V. Grashchenkov, B. V. Shchetanov, and I. Yu. Efimochkin, “development of heat-resistant material powder metallurgy, Part II,” Vse Materialy. Éntsikl. Sprav., No. 6, 10–22 (2011).

17.

C. Suryanarayana, “Recent developments in mechanical alloying,” Reviews on Advanced Materials Science, 18, 203–211 (2008).

18.

C. Suryanarayana, “Mechanical alloying: A novel technique to synthesize advanced materials,” Research, Article ID 4219812, 17, (2019); https://doi.org/10.34133/2019/4219812.

Title: Investigation of Mechanical Alloying for Powder Materials Based on Mo–Ti–Zr–C and Mo–Hf–C Systems
Publication date: 04-04-2021
Published in: Metallurgist / Issue 11-12/2021
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-021-01107-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11-12/2021

Effect of the Slag Layer Thickness, Gas Composition, and Furnace Capacity on the Arc Efficiency and Heat Transfer in Arc Furnaces. Part II. Effect of the Slag Thickness on the Magnitude of Arc Heat Radiation Incident to the Walls

Impurity Distribution During Electrolytic Refining of Antimony

Influence of Preliminary Heat Treatment of Vanadium Sludges on the Manufacturability of their Processing

Study of Conditions for Thermal Deformation of Additively Grown Billets from VT6 Titanium Alloy using Finite Element Simulation

Effect of Structural Factors on Difference in Structural Steel Longitudinal and Transverse Impact Specimen Embrittlement after Controlled Rolling and Thermomechanical Treatment

Track Record of Nondestructive Testing Methods Applied to Steel Plate Quality Indexes at Magnitogorsk Iron and Steel Company

Premium Partners