Top

Journal of Materials Engineering and Performance

Published in:

12-06-2020

Investigation of Mechanical and Tribological Performance of Ti6Al4V-Based Self-Lubricating Composites with Different Microporous Channel Parameters

Authors: Hongyan Zhou, Xiaoliang Shi, Ahmed Mohamed Mahmoud Ibrahim, Guanchen Lu, Zhenyu Yang, Yawen Xue

Published in: Journal of Materials Engineering and Performance | Issue 6/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Based on the microporous structure lubrication method, Ti6Al4V(TC4)-based self-lubricating composites (TC4-SAC) with microporous channels filled by lubricant Sn-Ag-Cu are prepared. The effects of microporous channel parameters on stress and deformation of TC4-SAC are analyzed by finite element method. In addition, the friction and wear behaviors of TC4-SAC with different microporous channel parameters are compared, and the self-lubricating mechanisms of TC4-SAC are also analyzed. The results show that microporous channel parameters have a significant influence on the mechanical and tribological performance of TC4-SAC. Moreover, when the vertical depth of microporous channel = 3.5 mm, the micropore pitch = 3 mm, and the micropore diameter = 0.8 mm, TC4-SAC can obtain the best mechanical property and self-lubricating characteristic.

previous article Corrosion Inhibition of l-Methionine Amino Acid as a Green Corrosion Inhibitor for Stainless Steel in the H2SO4 Solution

next article Correlation of Microstructure and Fatigue Properties of Hot-Rolled Steel Strips for Automobile Structural Application

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

C. Veiga, J.P. Davim, and A.J.R. Loureiro, Properties and Applications of Titanium Alloys: A Brief Review, Rev. Adv. Mater. Sci., 2012, 32(2), p 133–148

J.M. Cai, G.B. Mi, F. Gao, and H. Huang, Research and Development of Some Advanced High Temperature Titanium Alloys for Aero-Engine, J. Mater. Eng., 2016, 44(8), p 1–10

Z.S. Zhu, Recent Research and Development of Titanium Alloys for Aviation Application in China, J. Aeronaut. Mater., 2014, 34(4), p 44–50

T.C. Hu, L.T. Hu, and Q. Ding, Effective Solution for the Tribological Problems of Ti-6Al-4V: Combination of Laser Surface Texturing and Solid Lubricant Film, Surf. Coat. Technol., 2012, 206(24), p 5060–5066CrossRef

F. Bartolomeu, M. Buciumeanu, E. Pinto, N. Alves, F.S. Silva, O. Carvalho, and G. Miranda, Wear Behavior of Ti6Al4V Biomedical Alloys Processed by Selective Laser Melting, Hot Pressing and Conventional Casting, Trans. Nonferrous Metals Soc. China, 2017, 27(4), p 829–838CrossRef

Z.X. Wang, H.R. Wu, X.L. Shan, N.M. Lin, Z.Y. He, and X.P. Liu, Microstructure and Erosive Wear Behaviors of Ti6Al4V Alloy Treated by Plasma Ni Alloying, Appl. Surf. Sci., 2015, 388, p 510–516CrossRef

R.L. Niu, J.L. Wang, and Y.X. Wang, Structure and Tribological Behavior of GLCH/Nitride Coupled Coatings on Ti6Al4V by Nitriding and Magnetron Sputtering, Diam. Relat. Mater., 2016, 64, p 70–79CrossRef

J.N. Li, C.Z. Chen, T. Squartini, and Q.S. He, A Study on Wear Resistance and Microcrack of the Ti₃Al-TiAl+TiC Ceramic Layer Deposited by Laser Cladding on Ti-6Al-4V Alloy, Appl. Surf. Sci., 2010, 257(5), p 1550–1555CrossRef

X.W. Li, T. Shi, B. Li, X.C. Chen, C.W. Zhang, Z.G. Guo, and Q.X. Zhang, Subtractive Manufacturing of Stable Hierarchical Micro-nano Structures on AA5052 Sheet with Enhanced Water Repellence and Durable Corrosion Resistance, Mater. Des., 2019, 183, p 108152CrossRef

10.

K. Yang, X.L. Shi, Y.C. Huang, W.Z. Zhai, Y.F. Wang, A. Zhang, and Q.X. Zhang, The Research on the Sliding Friction and Wear Behaviors of TiAl-10wt.%Ag at Elevated Temperatures, Mater. Chem. Phys., 2017, 186, p 317–326CrossRef

11.

H.Y. Zhou, X.L. Shi, X.Y. Liu, G.C. Lu, and Y. Chen, Tribological Properties and Self-repairing Functionality of Ti6Al4V-Multilayer Graphene-Ag Composites, J. Mater. Eng. Perform., 2019, 28(6), p 3381–3392CrossRef

12.

Z.M. Liu, Elevated Temperature Diffusion Self-lubricating Mechanisms of a Novel Cermet Sinter with Orderly Micro-pores, Wear, 2007, 262(5–6), p 600–606CrossRef

13.

Y.J. Wang and Z.M. Liu, Tribological Properties of High Temperature Self-lubrication Metal Ceramics with an Interpenetrating Network, Wear, 2008, 265(11–12), p 1720–1726CrossRef

14.

K. Yang, H.G. Ma, W.B. Zhao, X.X. Li, and H. Liu, Investigation of the preparation and tribological behavior of a frictional interface covered with sinusoidal microchannels containing SnAgCu and Ti₃SiC₂, Tribol. Int., 2020, https://doi.org/10.1016/j.triboint.2020.106368 CrossRef

15.

Y.W. Xue, X.L. Shi, G.C. Lu, H.Y. Zhou, Y. Chen, and J.P. Shu, Tribological behavior of M50-Sn-Ag-Cu composites with curved microchannels. J. Mater. Eng. Perform., 2020, 29(4), p 2190–2201

16.

X.Y. Liu, X.L. Shi, Y.C. Huang, X.B. Deng, G.C. Lu, Z. Yan, and B. Xue, Tribological Behavior and Self-healing Functionality of M50 Material Covered with Surface Micropores Filled with Sn-Ag-Cu, Tribol. Int., 2018, 128, p 365–375CrossRef

17.

Y.C. Huang, X.L. Shi, K. Yang, J.L. Zou, Q. Shen, Y.F. Wang, and Z.H. Wang, Effects of Friction Layer Thickness on the Tribological Performance of Ni₃Al-Ag-MoO₃, J. Mater. Eng. Perform., 2017, 26(5), p 2313–2321CrossRef

18.

W.J. Zhang, B.V. Reddy, and S.C. Deevi, Physical Properties of TiAl-Base Alloys, Scripta Mater., 2001, 45(6), p 645–651CrossRef

19.

B. Lee, D. Lee, J.H. Lee, H.J. Ryu, and S.H. Hong, Enhancement of Toughness and Wear Resistance in Boron Nitride Nanoplatelet (BNNP) Reinforced Si₃N₄ Nanocomposites, Scientific Reports, 2016, 6, p 27609CrossRef

20.

G.C. Lu, X.L. Shi, X.Y. Liu, H.Y. Zhou, Y. Chen, Z.Y. Yang, and Y.C. Huang, Tribological Performance of Functionally Gradient Structure of Graphene Nanoplatelets Reinforced Ni₃Al Metal Matrix Composites Prepared by Laser Melting Deposition, Wear, 2019, 428, p 417–429CrossRef

21.

L.M. Zhou, J. Xiong, Z.X. Guo, and J.L. Ye, Design and Preparation of Gradient Graphite/Cermets Self-lubricating Composites, J. Mater. Sci. Technol., 2018, 34(8), p 122–130

22.

X. Huang, Z.X. Li, and H. Huang, Recent Development of New High-Temperature Titanium Alloys for High Thrust-Weight Ratio Aero-engines, Mater. China, 2011, 30(6), p 21–27

23.

H.Y. Zhou, X.L. Shi, Z.Y. Yang, C.H. Wu, G.C. Lu, and Y.W. Xue, Tribological Property and Frictional Noise Performance of Titanium Alloys with Sn-Ag-Cu and TiC Filled into Surface Dimples, Tribol. Int., 2020, 144, p 106121CrossRef

24.

H.Y. Zhou, X.L. Shi, G.C. Lu, Y. Chen, Z.Y. Yang, C.H. Wu, Y.W. Xue, and A.M.M. Ibrahim, Friction and Wear Behaviors of TC4 Alloy with Surface Microporous Channels Filled by Sn-Ag-Cu and Al₂O₃ Nanoparticles, Surf. Coat. Technol., 2020, 387, p 125552CrossRef

Title: Investigation of Mechanical and Tribological Performance of Ti6Al4V-Based Self-Lubricating Composites with Different Microporous Channel Parameters
Authors: Hongyan Zhou
Xiaoliang Shi
Ahmed Mohamed Mahmoud Ibrahim
Guanchen Lu
Zhenyu Yang
Yawen Xue
Publication date: 12-06-2020
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 6/2020
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-04888-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2020

Effects of Rapid Induction Heating on Transformations in 0.6% C Steels

Dry Sliding Wear Behavior of AZ91 Alloy Processed by Rotary-Die Equal Channel Angular Pressing

Effect of Mo in Combination with Nb on Austenite Grain Size Control in Vacuum Carburizing Steels

A Comparative Study on Cooling Performance of Hot Oil and Molten Salt Quench Media for Industrial Heat Treatment

A Brief Review on Test Systems Using a Ball Probe for Determination of Cooling Characteristics of Quenchants

Carburizing Heat Treatment of Selective-Laser-Melted 20MnCr5 Steel

Premium Partners