Top

Journal of Materials Engineering and Performance

Published in:

04-02-2020

Investigation of WS₂-Embedded Al₂O₃ Coatings Prepared by Microarc Oxidation

Authors: Xin Wu, Hongxia Li, Renguo Song

Published in: Journal of Materials Engineering and Performance | Issue 2/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Microarc oxidation (MAO) Al₂O₃ coating is an effective approach to improve the performance of aluminum. However, some problems for MAO coatings continue to exist and require solutions. In this work, WS₂ embedded in Al₂O₃ ceramic coatings is fabricated through MAO and characterized using x-ray diffractometer, scanning electron microscope, and energy dispersive spectrum. Moreover, various measurement tests, including hardness, friction and wear, polarization, and corrosion resistance tests, are conducted. The WS₂ (2)-Al₂O₃ composite coating has shown enhanced mechanical performance and corrosion resistance compared with the WS₂ (0)-Al₂O₃ composite coating. The enhancement can be mainly ascribed to the reasonably embedded WS₂ with dense microstructure. Therefore, this work offers a new facile method for improving the performance of MAO coatings.

previous article Fabrication and Mechanical Behavior of High-Porosity Bulk Bimodal Porous Cu Via Chemical De-alloying of Cu-Al Alloys

next article Effects of Filler Metals on Heat-Affected Zone Cracking in IN-939 Superalloy Gas-Tungsten-Arc Welds

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

H.X. Li, X. Wu, and Z.G. Ji, Improvement of Structural and Mechanical Properties of Alumina Coatings by Incorporation of TiO₂ and α-Al₂O₃ Nanoadditives, Mater. Sci. Technol., 2013, 28, p 1434–1438CrossRef

R. Tyagi, A.K. Das, and A. Mandal, Electrical Discharge Coating Using WS₂ and Cu Powder Mixture for Solid Lubrication and Enhanced Tribological Performance, Tribol. Int., 2018, 120, p 80–92CrossRef

X. Zhang, Q. Pan, L. Hao, Q. Lin, X. Tian, Z. Zhang, S. Wang, and H. Wang, Preparation of Magnetic Fluorescent Dual-Drug Nanocomposites for Codelivery of Kaempferol and Paclitaxel, J. Wuhan Univ. Technol. Mater. Sci. Ed., 2018, 33, p 256–262CrossRef

J. Lu, X. He, H. Li, and R. Song, Microstructure and Corrosion Resistance of PEO Coatings Formed on KBM10 Mg Alloy Pretreated with Nd(NO₃)₃, Materials, 2018, 11, p 1062–1067CrossRef

M.S. Yilmaz and O. Sahin, Applying High Voltage Cathodic Pulse with Various Pulse Durations on Aluminium via Micro-arc Oxidation (MAO), Surf. Coat. Technol., 2018, 347, p 278–285CrossRef

H.X. Li, W.J. Li, R.G. Song, and Z.G. Ji, Effects of Different Current Densities on Properties of MAO Coatings Embedded with and Without α-Al₂O₃ Nanoadditives, Mater. Sci. Technol., 2013, 28, p 565–568CrossRef

G.P. Cao and R.G. Song, Microstructure and Properties of Ceramic Coatings prepared by Micro-arc Oxidation on 7075 Aluminum Alloy, Mater. Res. Express, 2018, 5, p 026407CrossRef

P. Yi, W. Yue, J. Liang, B. Hou, J. Sun, Y. Gu, and J. Liu, Effects of Nanocrystallized Layer on the Tribological Properties of Micro-arc Oxidation Coatings on 2618 Aluminum Alloy Under High Temperatures, Int. J. Adv. Manuf. Technol., 2017, 96, p 1635–1646CrossRef

Y. Yang, Y. Gu, L. Zhang, X. Jiao, and J. Che, Influence of MAO Treatment on the Galvanic Corrosion Between Aluminum Alloy and 316L Steel, J. Mater. Eng. Perform., 2017, 26, p 6099–6106CrossRef

10.

H.-X. Li, R.-G. Song, and Z.-G. Ji, Effects of Nano-additive TiO₂ on Performance of Micro-arc Oxidation Coatings Formed on 6063 Aluminum Alloy, Trans. Nonferr. Met. Soc. China, 2013, 23, p 406–411CrossRef

11.

J. Wang, S. Huang, M. He, P. Wangyang, Y. Lu, H. Huang, and L. Xu, Microstructural Characteristic, Outward-Inward Growth Behavior and Formation Mechanism of MAO Ceramic Coating on the Surface of ADC12 Al Alloy with Micro-groove, Ceram. Int., 2018, 44, p 7656–7662CrossRef

12.

K. Holmberg, P. Andersson, and A. Erdemir, Global Energy Consumption Due to Friction in Passenger Cars, Tribol. Int., 2012, 47, p 221–234CrossRef

13.

F.A. Essa, Q. Zhang, and X. Huang, Investigation of the Effects of Mixtures of WS₂ and ZnO Solid Lubricants on the Sliding Friction and Wear of M50 Steel Against Silicon Nitride at Elevated Temperatures, Wear, 2017, 374-375, p 128–141CrossRef

14.

J.-K. Xiao, W. Zhang, and C. Zhang, Microstructure Evolution and Tribological Performance of Cu-WS₂ Self-lubricating Composites, Wear, 2018, 412-413, p 109–119CrossRef

15.

S. Xu, M. Hu, J. Sun, L. Weng, W. Liu, and X. Gao, A Simple Strategy to Tailor the Microstructure and Wear-Resistance of Sputtered WS₂ Films, Mater. Lett., 2018, 216, p 179–181CrossRef

16.

S. Rengifo, C. Zhang, S. Harimkar, B. Boesl, and A. Agarwal, Effect of WS₂ Addition on Tribological Behavior of Aluminum at Room and Elevated Temperatures, Tribol. Lett., 2017, 65, p 76CrossRef

17.

R. Zhang, D. Qiao, X. Liu, Z. Guo, M. Cai, and L. Shi, A Facile and Effective Method to Improve the Dispersibility of WS₂ Nanosheets in PAO for the Tribological Performances, Tribol. Int., 2018, 118, p 60–70CrossRef

18.

J. Korzekwa and A. Gądek-Moszczak, Application of the Image Analysis Methods for the Study of Al₂O₃ Surafce Coatings, Sciendo, 2019, 1, p 406–411

19.

X. Quan, S. Zhang, M. Hu, X. Gao, D. Jiang, and J. Sun, Tribological Properties of WS₂/MoS₂-Ag Composite Films Lubricated with Ionic Liquids under Vacuum Conditions, Tribol. Int., 2017, 115, p 389–396CrossRef

20.

X. Wu, H.X. Li, J.P. Lu, Y.Y. Li, C.B. Yang, Y.H. Cen, Z.T. Yang, and R.G. Song, MoS₂ Additive to the MAO Al₂O₃ Composite Coatings with Enhanced Mechanical Performances, Mater. Res. Express, 2019, 6, p 016543CrossRef

21.

H.X. Li, V.S. Rudnev, X.H. Zheng, T.P. Yarovaya, and R.G. Song, Characterization of Al₂O₃ Ceramic Coatings on 6063 Aluminum Alloy Prepared in Borate Electrolytes by Micro-arc Oxidation, J. Alloys Compd., 2008, 462, p 99–102CrossRef

22.

Y. Qin, D. Xiong, and J. Li, Tribological Properties of Laser Surface Textured and Plasma Electrolytic Oxidation Duplex-Treated Ti₆Al₄V Alloy Deposited with MoS₂ Film, Surf. Coat. Technol., 2015, 269, p 266–272CrossRef

23.

N. Xiang, R.G. Song, H. Li, C. Wang, Q.Z. Mao, and Y. Xiong, Study on Microstructure and Electrochemical Corrosion Behavior of PEO Coatings Formed on Aluminum Alloy, J. Mater. Eng. Perform., 2015, 24, p 5022–5031CrossRef

24.

X. He, D. Kong, and R. Song, Microstructures and Properties of Laser Cladding Al-TiC-CeO₂ Composite Coatings, Materials, 2018, 11, p 198CrossRef

Title: Investigation of WS2-Embedded Al2O3 Coatings Prepared by Microarc Oxidation
Authors: Xin Wu
Hongxia Li
Renguo Song
Publication date: 04-02-2020
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2020
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-04613-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2020

Investigation of the Susceptibility of the WE54 Magnesium-Based Alloy to Stress Corrosion Cracking

Study on the Microstructure and Alternating Current Corrosion Behavior of SAF2507 Super-Duplex Stainless Steel in 3.5%NaCl Solution

Studies on Creep and Wear Behavior of Mo-40Ti-10Si Alloy Prepared by Hot Pressing

Study on Corrosion Resistance of Zn-Al Alloy Coated with Zeolitic Imidazolate Framework-67 Film in 3.5 wt.% NaCl Solution

Microstructural and Mechanical Evaluations of Transient Liquid Phase Bonded In X-750/BNi-3/SAF 2205

Fracture Behavior of Annealed and Equal Channel Angular Pressed Copper: An Experimental Study

Premium Partners