Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Metal Science and Heat Treatment
Published in: Metal Science and Heat Treatment 7-8/2023

20-12-2023 | WELDED JOINTS

Joining FE55006 Cast Iron and SAE 8620 Steel by Friction Hydro-Pillar Processing (FHPP)

Authors: Renan Mensch Landell, Thiago Tauchen Rossatto, Diogo Trento Buzzatti, Guilherme Vieira Braga Lemos, Cleber Rodrigo De Lima Lessa, Daniel Saraiva, Douglas Martinazzi, Afonso Reguly

Published in: Metal Science and Heat Treatment | Issue 7-8/2023

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The possibility of using a special type of Friction Stir Welding (FSW) – Friction Hydro Pillar Processing (FHPP) to manufacture a joining between dissimilar materials (high-carbon ductile iron FE55006 and low-carbon steel SAE 8620) is studied. The macrostructure, microstructure, microhardness and residual stresses of the welded joint are determined. The efficiency of using the FHPP technology for obtaining high-quality joints from dissimilar iron-based alloys is demonstrated. It is established that such joints have a high hardness due to the formation of a martensitic structure in the alloys during their processing by the FHPP method.
previous article Evolution of Gradient Structure Under Heat Treatment of Metastable Austenitic Stainless Steel Subjected to Cold Radial Forging

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
S. Korkmaz, “A methodology to predict fatigue life of cast iron: uniform material law for cast iron,” J. Iron Steel Res. Int., 18(8), 42 – 45 (2011).CrossRef
2.
M. Shirani and G. Härkegård, “Fatigue life distribution and size effect in ductile cast iron for wind turbine components,” Eng. Fail. Anal., 18(1), 12 – 24 (2011).CrossRef
3.
R. Winiczenko and M. Kaczorowski, “Friction welding of ductile iron with stainless steel,” J. Mater. Process. Technol., 213(3), 453 – 462 (2013).CrossRef
4.
R. A. Bushey, “Welding of cast irons,” in: ASM Handbook, Vol. 6. Welding, Brazing, and Soldering, ASM International, (1993), pp. 708 – 721.
5.
A. Zeemann, A Soldagem por Fusão Para Reconstruçãode Componentes de Ferro Fundido, Infosolda (2003), pp. 1 – 4.
6.
R. A. Lovato, W. Guesser, and A. F. Paris, “Soldagem de ferro fundido vermicular com eletrodos revestidos (Welding Compacted Iron with SMAW)” in: Congresso Nacional de Soldagem, Caxias do Sul. Anais. Abs. (2007), V. 32, p. 1.
7.
L. A. Pereira, “Estudo da soldabilidade do ferro fundido dúctil SiboDur® 700,” 159 f.: Dissertação de Mestrado. Engenharia Mecânica, Instituto Superior de Engenharia do Porto, Porto (2016).
8.
S. Kolukisa, “The effect of the welding temperature on the weldability in diffusion welding of martensitic (AISI 420) stainless steel with ductile (spheroidal graphite-nodular) cast iron,” J. Mater. Process. Technol., 186(1 – 3), 33 – 36 (2007).CrossRef
9.
International Organization for Standardization. ISO 15620: Welding – Friction Welding of Metallic Materials, ISO, Switzerland (2000), 33 p.
10.
A. Meyer, “Friction hydro pillar processing: bonding mechanism and properties,” in: Master thesis. Gemeinsamen Fakultät für Maschinenbau und Elektrotechnik Der Technischen Universität Carolo, Braunschweig (2004), 135 p.
11.
S. Yu. Kondrat’ev, Yu. N. Morozova, Yu. A. Golubev et al., “Microstructure and mechanical properties of welds of Al – Mg – Si alloys after different modes of impulse friction stir welding,” Met. Sci. Heat Treat., 59(11 – 12), 697 – 702 (2018).
12.
R. Ueji, “Microstructure evolution in dissimilar metal joint interface obtained by friction welding of cast iron and carbon steel,” Join. Weld. Res. Inst., Osaka, 42(1), 33 – 37 (2013).
13.
S. Mironov, Y. Sato, and H. Kokawa, “Microstructural evolution during friction stir-processing of pure iron,” Acta Mater., 56(11), 2602 – 2614 (2008).CrossRef
14.
Yu-lai Song, et al., Strength distribution at interface of rotary- friction-welded aluminum to nodular cast iron,” Trans. Nonferr. Met. Soc. China, 18(1), 14 – 18 (2008)CrossRef
15.
D. Martinazzi, G. V. B. Lemos, R. M. Landell, et al., “Estudo preliminar sobre o efeito da geometria do pino no processo de soldagem FHPP entre o ferro fundido nodular FE55006 e o aço SAE 8620,” Periódico Tchê Química, 16(31), 642 (2019).CrossRef
16.
ASTM E-837. Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method, Annual Book of ASTM Standards, Vol. 03.01, ASTM International (2002), 16 p.
17.
T. Schwarz and H. Kockkelmann, The Hole-Drilling Method — the Best Technique for the Experimental Determination of Residual Stress in Many Fields of Application, MTB, Stuttgart (1993), pp. 33 – 38.
18.
S. Gencalp Irizalp, N. Saklakoglu, F. Baris, and S. Kayral, “Effect of shot peening on residual stress distribution and microstructure evolution of artificially defected 50CrV4 steel,” J. Mater. Eng. Perform., 29(11), 7607 – 7616 (2020).
19.
S. K. Singh, K. Chattopadhyay, and P. Dutta, “Determination of optimum process parameters and residual stress in friction welding of thixocast A356 aluminum alloy,” Metall. Mater. Trans. B, 51(6), 3079 – 3088 (2020).CrossRef
20.
C. Bühr, B. Ahmad, P. A. Colegrove, et al., “Prediction of residual stress within linear friction welds using a computationally efficient modelling approach,” Mater. Des., 139, 222 – 233 (2018).CrossRef
Metadata
Title
Joining FE55006 Cast Iron and SAE 8620 Steel by Friction Hydro-Pillar Processing (FHPP)
Authors
Renan Mensch Landell
Thiago Tauchen Rossatto
Diogo Trento Buzzatti
Guilherme Vieira Braga Lemos
Cleber Rodrigo De Lima Lessa
Daniel Saraiva
Douglas Martinazzi
Afonso Reguly
Publication date
20-12-2023
Publisher
Springer US
Published in
Metal Science and Heat Treatment / Issue 7-8/2023
Print ISSN: 0026-0673
Electronic ISSN: 1573-8973
DOI
https://doi.org/10.1007/s11041-023-00964-5

Other articles of this Issue 7-8/2023

Metal Science and Heat Treatment 7-8/2023 Go to the issue

THERMOCHEMICAL TREATMENT AND COATINGS

Influence of Gas Mixture Ratio on Wear and Corrosion Properties of Oxynitrided Films for 316L (03Kh17N14M3) Austenitic Stainless Steel

ALUMINUM AND ALUMINUM ALLOYS

Investigation of the Effects of Overlapping Passes on Friction Stir Processed Aluminum Alloy 5083

OriginalPaper

Size Scatter of Disperse Particles: Influence on Grain Growth

OriginalPaper

Effect of Heat Treatment on Fatigue Strength and Frequency Stability of Tool Steel 6KhS

TITANIUM AND TITANIUM ALLOYS

Effect of the Temperature and Rate Parameters of Hot Deformation on the Mechanical Behavior of Forged Titanium Alloy VT14 Under Compression and Tension

OriginalPaper

Investigation of the Processes of Formation and Properties of Titanium Nickelides Welded on Titanium

Premium Partners

    Image Credits