Issue 6/2011
Content (29 Articles)
Comparison of DME HCCI operating ranges for the thermal stratification and fuel stratification based on a multi-zone model
Dongwon Jung, Oseock Kwon, Ock Taeck Lim
Comparative study on heat transfer characteristics of nanofluidic thermosyphon and grooved heat pipe
Dong-Ryun Shin, Seok-Ho Rhi, Taek-Kyu Lim, Ju-Chan Jang
Numerical simulation and design of a parabolic trough solar collector used as a direct generator in a solar-GAX cooling cycle?
Daniel Sauceda, Nicolás Velázquez, Octavio García-Valladares, Ricardo Beltrán
Delay of ignition in early direct-injected PCCI engine combustion using fuel-evaporative cooling and cooled EGR
Yongha Sung, Gilsung Jung, Myung Taeck Lim
Experimental study on steady state heating performance of a multi-type heat pump system for finding the optimum control variable
Jong Won Choi, Il Hwan Lee, Min Soo Kim
Inverse estimation of properties for charring material using a hybrid genetic algorithm
Hee-Chul Chang, Won-Hee Park, Kyung-Beom Yoon, Tae-Kuk Kim, Duck-Hee Lee, Woo-Sung Jung
Numerical investigation on developing laminar forced convective heat transfer and entropy generation in an annular helicoidal tube
Shuang-Ying Wu, Su-Jun Chen, Lan Xiao, You-Rong Li
Experimental hover performance evaluation on a small-scale rotor using a rotor test stand
Byoung-Eon Lee, Young-Seop Byun, Jeong Kim, Beom-Soo Kang
An integrated blade optimization approach based on parallel ANN and GA with hierarchical fair competition dynamic-niche
Bin Zhang, Tong Wang, Chuan-gang Gu, Xin-Wei Shu
A computational study on the flow characteristics of a self-compensating liquid balancer
Chung-Hyo Jung, Jin-Tak Kim, Yun-Ho Choi
Experimental investigation on dilute gas-solid multiphase jet in crossflow
Yao Fu, Tong Wang, Chuangang Gu
Enhancement of mixing within a micro cavity by use of transient induced-charge electro-osmotic flow around micro electrodes
Suresh Alapati, Dolfred Vijay Fernandes, Yong Kweon Suh
Injection profile effects on low speed axial compressor stability enhancement
Hyung-Soo Lim, Hyo-Jo Bae, Young-Cheon Lim, Seung-Jin Song, Shin-Hyoung Kang, Soo-Seok Yang
Interaction between laser-induced plasma/vapor and arc plasma during fiber laser-MIG hybrid welding
Jun Wang, Chunming Wang, Xuanxuan Meng, Xiyuan Hu, Yangchun Yu, Shengfu Yu
Experimental research on machining characteristics of SiC ceramic with end electric discharge milling
Renjie Ji, Yonghong Liu, Yanzhen Zhang, Xin Dong, Zhili Chen, Baoping Cai
Evaluation of weldability for resistance spot welded single-lap joint between GA780DP and hot-stamped 22MnB5 steel sheets
Hong-Seok Choi, Geun-Hwan Park, Woo-Seung Lim, Byung-min Kim
Dissipative proportional integral observer for a class of uncertain nonlinear systems
Jongchul Jung, Donghwi Lee, Kunsoo Huh
Development of integrated controller for a compound hybrid excavator
Jaewoong Choi, Hakgu Kim, Seungjin Yu, Kyongsu Yi
Drive control algorithm for an independent 8 in-wheel motor drive vehicle
Wongun Kim, Kyongsu Yi, Jongseok Lee
Robust adaptive deadzone and friction compensation of robot manipulator using RWCMAC network
Seong Ik Han, Kwon Soon Lee, Min Gyu Park, Jang Myung Lee
CMAC-based compound control of hydraulically driven 6-DOF parallel manipulator
Shou-Kun Wang, Jun-Zheng Wang, Da-Wei Shi
Accurate calibration of kinematic parameters for two wheel differential mobile robots
Kooktae Lee, Changbae Jung, Woojin Chung
Maximal power extraction strategy in the transition region and its benefit on the AEP (annul energy product)
Yoonsu Nam, Jeong-gi Kim, Carlo L. Bottasso
Magneto-rheological accumulator for temperature compensation in hydropneumatic suspension systems
Jeong-Uk Seo, Young-Won Yun, Myeong-Kwan Park