Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Experimental and Numerical Analysis of the Effect of Ribs and Beds in Sheet Metal Parts with 90° Bend Read chapter Read first chapter

2016 | OriginalPaper | Chapter

Laser Beam Machining, Laser Beam Hybrid Machining, and Micro-channels Applications and Fabrication Techniques

Authors : Saied Darwish, Naveed Ahmed, Abdulrahman M. Alahmari

Published in: Machining, Joining and Modifications of Advanced Materials

Publisher: Springer Singapore

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Laser beam machining (LBM) has proven its applications and advantages over almost all the range of engineering materials. It offers its competences from macro machining to micro and nano-machining of simple-to-complex shapes. The flipside of LBM is the existence of universal problems associated with its thermal ablation mechanism. In order to alleviate or reduce the inherent problems of LBM, a massive research has been done during the past decade and in turn build a relatively new route of laser-hybrid processes. The hybrid approaches in laser ablation have demonstrated much improved results in terms of material removal rate, surface integrity, geometrical tolerances, thermal damage, metallurgical alterations and many more. This chapter reviews the research work carried out so far in the area of LBM and its hybrid processes for different materials and shapes. The literature assessment is mainly classified into seven categories named as: (1) Introduction, (2) Laser Beam Machining (LBM), (3) Laser Assisted Machining (LAM), (4) Laser Chemical Machining/Etching (LCM/E), (5) Laser Assisted Electrochemical Machining (LAECM) and (6) Under-Water Laser Ablation (UWLA) and (7) Micro-channel Applications and Fabrication Techniques. The last part of this chapter discusses the research gaps and future research directions in the context of laser and laser-hybrid ablation.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
previous chapter Laser Polishing of Additive Manufactured AlSi10Mg Parts with an Oscillating Laser Beam
next chapter Erratum to: Laser Beam Machining, Laser Beam Hybrid Machining, and Micro-channels Applications and Fabrication Techniques
Literature
1.
Dubey, A.K., Yadava, V.: Laser beam machining—a review. Int. J. Mach. Tools Manuf. 48(6), 609–628 (2008)CrossRef
2.
Yilbas, B.S.: 9.02—Laser heating and the phase change process. In: Hashmi, S., Batalha, G.F., Tyne, C.J.V., Yilbas, B. (eds.) Comprehensive Materials Processing, pp. 5–24. Elsevier, Oxford (2014)
3.
Willis, D.A., Xu, X.: Heat transfer and phase change during picosecond laser ablation of nickel. Int. J. Heat Mass Transf. 45(19), 3911–3918 (2002)CrossRef
4.
Chryssolouris, G., Anifantis, N., Karagiannis, S.: Laser assisted machining: an overview. J. Manuf. Sci. Eng. 119(4B), 766–769 (1997)CrossRef
5.
Nakashima, S., Sugioka, K., Midorikawa, K.: Fabrication of microchannels in single-crystal GaN by wet-chemical-assisted femtosecond-laser ablation. Appl. Surf. Sci. 255(24), 9770–9774 (2009)CrossRef
6.
Dong, C., Gu, Y., Zhong, M., Li, L., Sezer, K., Ma, M., Liu, W.: Fabrication of superhydrophobic Cu surfaces with tunable regular micro and random nano-scale structures by hybrid laser texture and chemical etching. J. Mater. Process. Technol. 211(7), 1234–1240 (2011)CrossRef
7.
Nowak, R., Metev, S.: Thermochemical laser etching of stainless steel and titanium in liquids. Appl. Phys. A 63(2), 133–138 (1996)CrossRef
8.
Park, J.-K., Yoon, J.-W., Cho, S.-H.: Vibration assisted femtosecond laser machining on metal. Opt. Lasers Eng. 50(6), 833–837 (2012)CrossRef
9.
Park, J.-K., Yoon, J.-W., Kang, M.-C., Cho, S.-H.: Surface effects of hybrid vibration-assisted femtosecond laser system for micro-hole drilling of copper substrate. Trans. Nonferrous Met. Soc. China 22(Supplement 3), s801–s807 (2012)CrossRef
10.
Li, L., Diver, C., Atkinson, J., Giedl-Wagner, R., Helml, H.J.: Sequential laser and EDM micro-drilling for next generation fuel injection nozzle manufacture. CIRP Ann. Manuf. Technol. 55(1), 179–182 (2006)CrossRef
11.
Lu, J., Xu, R.Q., Chen, X., Shen, Z.H., Ni, X.W., Zhang, S.Y., Gao, C.M.: Mechanisms of laser drilling of metal plates underwater. J. Appl. Phys. 95(8), 3890–3894 (2004)CrossRef
12.
O’Malley, S.M., Amin, M., Borchert, J., Jimenez, R., Steiner, M., Fitz-Gerald, J.M., Bubb, D.M.: Formation of rubrene nanocrystals by laser ablation in liquids utilizing MAPLE deposited thin films. Chem. Phys. Lett. 595–596, 171–174 (2014)CrossRef
13.
Taniguchi, N.: Current status in, and future trends of, ultraprecision machining and ultrafine materials processing. CIRP Ann. Manuf. Technol. 32(2), 573–582 (1983)CrossRef
14.
Meijer, J., Du, K., Gillner, A., Hoffmann, D., Kovalenko, V.S., Masuzawa, T., Ostendorf, A., Poprawe, R., Schulz, W.: Laser machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons. CIRP Ann. Manuf. Technol. 51(2), 531–550 (2002)CrossRef
15.
Meijer, J.: Laser beam machining (LBM), state of the art and new opportunities. J. Mater. Process. Technol. 149(1–3), 2–17 (2004)CrossRef
16.
Chen, X., Liu, X.: Short pulsed laser machining: how short is short enough? J. Laser Appl. 11(6), 268–272 (1999)CrossRef
17.
Ready, J.F.: Fundamentals of lasers (Chapter 1). In: Ready, J.F. (ed.) Industrial Applications of Lasers, 2nd edn, pp. 1–30. Academic Press, San Diego (1997)CrossRef
18.
Samant, A.N., Dahotre, N.B.: Three-dimensional laser machining of structural ceramics. J. Manuf. Process. 12(1), 1–7 (2010)CrossRef
19.
Meijer, J.: Laser beam machining (LBM), state of the art and new opportunities. J. Mater. Process. Technol. 149(1–3), 2–17 (2004)CrossRef
20.
Pham, D.T., Dimov, S.S., Petkov, P.V.: Laser milling of ceramic components. Int. J. Mach. Tools Manuf. 47(3–4), 618–626 (2007)CrossRef
21.
22.
Vogel, A., Noack, J., Nahen, K., Theisen, D., Busch, S., Parlitz, U., Hammer, D.X., Noojin, G.D., Rockwell, B.A., Birngruber, R.: Energy balance of optical breakdown in water at nanosecond to femtosecond time scales. Appl. Phys. B 68(2), 271–280 (2014)CrossRef
23.
Liu, X., Du, D., Mourou, G.: Laser ablation and micromachining with ultrashort laser pulses. IEEE J. Quantum Electron. 33(10), 1706–1716 (1997)CrossRef
24.
Sola, D., Peña, J.I.: Laser machining of Al2O3–ZrO2 (3 %Y2O3) eutectic composite. J. Eur. Ceram. Soc. 32(4), 807–814 (2012)CrossRef
25.
Cejnar, M., Kobler, H., Hunyor, S.N.: Quantitative photoplethysmography: Lambert-Beer law or inverse function incorporating light scatter. J. Biomed. Eng. 15(2), 151–154 (1993)CrossRef
26.
Weber, R., Hafner, M., Michalowski, A., Graf, T.: Minimum damage in CFRP laser processing. Phys. Procedia 12(Part B), 302–307 (2011)
27.
Yilbas, B.S., Shuja, S.Z., Arif, A., Gondal, M.A.: Laser-shock processing of steel. J. Mater. Process. Technol. 135(1), 6–17 (2003)CrossRef
28.
Zweig, A.D., Deutsch, T.F.: Shock waves generated by confined XeCl excimer laser ablation of polyimide. Appl. Phys. B 54(1), 76–82 (1992)CrossRef
29.
Mishra, S., Yadava, V.: Modeling and optimization of laser beam percussion drilling of nickel-based superalloy sheet using Nd:YAG laser. Opt. Lasers Eng. 51(6), 681–695 (2013)CrossRef
30.
Yue, L., Wang, Z., Li, L.: Material morphological characteristics in laser ablation of alpha case from titanium alloy. Appl. Surf. Sci. 258(20), 8065–8071 (2012)CrossRef
31.
Milovanović, D.S., Petrović, S.M., Shulepov, M.A., Tarasenko, V.F., Radak, B.B., Miljanić, Š.S., Trtica, M.S.: Titanium alloy surface modification by excimer laser irradiation. Opt. Laser Technol. 54, 419–427 (2013)CrossRef
32.
Cheng, J., Perrie, W., Wu, B., Tao, S., Edwardson, S.P., Dearden, G., Watkins, K.G.: Ablation mechanism study on metallic materials with a 10 ps laser under high fluence. Appl. Surf. Sci. 255(18), 8171–8175 (2009)CrossRef
33.
Le Harzic, R., Breitling, D., Weikert, M., Sommer, S., Föhl, C., Valette, S., Donnet, C., Audouard, E., Dausinger, F.: Pulse width and energy influence on laser micromachining of metals in a range of 100 fs to 5 ps. Appl. Surf. Sci. 249(1–4), 322–331 (2005)CrossRef
34.
Khosroshahi, M.E., Mahmoodi, M., Tavakoli, J.: Characterization of Ti6Al4V implant surface treated by Nd:YAG laser and emery paper for orthopaedic applications. Appl. Surf. Sci. 253(21), 8772–8781 (2007)CrossRef
35.
Cunha, A., Serro, A.P., Oliveira, V., Almeida, A., Vilar, R., Durrieu, M.-C.: Wetting behaviour of femtosecond laser textured Ti–6Al–4V surfaces. Appl. Surf. Sci. 265, 688–696 (2013)CrossRef
36.
Balla, V.K., Soderlind, J., Bose, S., Bandyopadhyay, A.: Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy. J. Mech. Behav. Biomed. Mater. 32, 335-344 (2014)
37.
Amaya-Vazquez, M.R., Sánchez-Amaya, J.M., Boukha, Z., Botana, F.J.: Microstructure, microhardness and corrosion resistance of remelted TiG2 and Ti6Al4V by a high power diode laser. Corros. Sci. 56, 36–48 (2012)CrossRef
38.
Al-ahmari, A., Saied, D., Naveed, A.: Laser beam micro-milling (LBMM) of selected aerospace alloys. Int. J. Adv. Manuf. Technol. (2016, Jan)
39.
Ahmed, N., Darwish, S., Alahmari, A.M., Shar, M.A.: Micro-channels by Nd:YAG laser beam machining: fabrication, microstructures, and micro-hardness profiles. Int. J. Adv. Manuf. Technol. 1–14 (2015, May)
40.
Ahn, D.-G., Byun, K.-W.: Influence of cutting parameters on surface characteristics of cut section in cutting of Inconel 718 sheet using CW Nd:YAG laser. Trans. Nonferrous Met. Soc. China 19(Supplement 1), s32–s39 (2009)CrossRef
41.
Ahn, D.G., Kim, M.S., Yoo, Y.T., Park, H.J.: Effects of process parameters on surface characteristics in cutting of cold rolled steel sheets using a high-power CW Nd: YAG laser. Mater. Sci. Forum 580–582, 455–458 (2008)CrossRef
42.
Ahn, D.G., Byun, K.W., Kang, M.C.: Thermal characteristics in the cutting of inconel 718 superalloy using CW Nd:YAG laser. J. Mater. Sci. Technol. 26(4), 362–366 (2010)CrossRef
43.
Hasçalık, A., Ay, M.: CO2 laser cut quality of Inconel 718 nickel—based superalloy. Opt. Laser Technol. 48, 554–564 (2013)CrossRef
44.
Wolynski, A., Herrmann, T., Mucha, P., Haloui, H., L’huillier, J.: Laser ablation of CFRP using picosecond laser pulses at different wavelengths from UV to IR. Phys. Procedia, 12(Part B), 292–301 (2011)
45.
Jiao, J., Wang, X.: Cutting glass substrates with dual-laser beams. Opt. Lasers Eng. 47(7–8), 860–864 (2009)CrossRef
46.
Emmelmanna, C., Petersen, M., Goeke, A., Canisius, M.: Analysis of laser ablation of CFRP by ultra-short laser pulses with short wavelength. Phys. Procedia 12(Part A), 565–571 (2011)
47.
Ghosal, A., Manna, A.: Response surface method based optimization of ytterbium fiber laser parameter during machining of Al/Al2O3-MMC. Opt. Laser Technol. 46, 67–76 (2013)CrossRef
48.
Ulutan, D., Ozel, T.: Machining induced surface integrity in titanium and nickel alloys: a review. Int. J. Mach. Tools Manuf. 51(3), 250–280 (2011)CrossRef
49.
Cicală, E., Soveja, A., Sallamand, P., Grevey, D., Jouvard, J.M.: The application of the random balance method in laser machining of metals. J. Mater. Process. Technol. 196(1–3), 393–401 (2008)CrossRef
50.
Perry, T.L., Werschmoeller, D., Li, X., Pfefferkorn, F.E., Duffie, N.A.: Pulsed laser polishing of micro-milled Ti6Al4V samples. J. Manuf. Process. 11(2), 74–81 (2009)CrossRef
51.
Ahmed, N., Darwish, S., Alahmari, A.M., Salik, K.: Laser ablation process competency to fabricate microchannels in titanium alloy. Mater. Manuf. Process. 30(11), 1290–1297 (2015)CrossRef
52.
Dehmas, M., Lacaze, J., Niang, A., Viguier, B.: TEM study of high-temperature precipitation of delta phase in Inconel 718 alloy. Adv. Mater. Sci. Eng. 2011, e940634 (2011)CrossRef
53.
Kuo, C.-M., Yang, Y.-T., Bor, H.-Y., Wei, C.-N., Tai, C.-C.: Aging effects on the microstructure and creep behavior of Inconel 718 superalloy. Mater. Sci. Eng. A 510–511, 289–294 (2009)CrossRef
54.
Aliou Niang, B.V.: Some features of anisothermal solid-state transformations in alloy 718. Mater. Charact. 61(5), 525–534 (2010)CrossRef
55.
Ghosh, S., Yadav, S., Das, G.: Study of standard heat treatment on mechanical properties of Inconel 718 using ball indentation technique. Mater. Lett. 62(17–18), 2619–2622 (2008)CrossRef
56.
57.
Yang, X., Richard Liu, C.: Machining titanium and its alloys. Mach. Sci. Technol. 3(1), 107–139 (1999)CrossRef
58.
Yilbas, B.S., Akhtar, S.S., Karatas, C.: Laser surface treatment of Inconel 718 alloy: thermal stress analysis. Opt. Lasers Eng. 48(7–8), 740–749 (2010)CrossRef
59.
Reissig, L., Völkl, R., Mills, M.J., Glatzel, U.: Investigation of near surface structure in order to determine process-temperatures during different machining processes of Ti6Al4V. Scr. Mater. 50(1), 121–126 (2004)CrossRef
60.
Choi, H., Li, X.: Fabrication and application of micro thin film thermocouples for transient temperature measurement in nanosecond pulsed laser micromachining of nickel. Sens. Actuators Phys. 136(1), 118–124 (2007)CrossRef
61.
Semaltianos, N.G., Perrie, W., French, P., Sharp, M., Dearden, G., Watkins, K.G.: Femtosecond laser surface texturing of a nickel-based superalloy. Appl. Surf. Sci. 255(5, Part 2), 2796–2802 (2008)
62.
Fauchet, P.M.: Gradual surface transitions on semiconductors induced by multiple picosecond laser pulses. Phys. Lett. A 93(3), 155–157 (1983)CrossRef
63.
Fournier, I., Marinach, C., Tabet, J.C., Bolbach, G.: Irradiation effects in MALDI, ablation, ion production, and surface modifications. Part II: 2,5-dihydroxybenzoic acid monocrystals. J. Am. Soc. Mass Spectrom. 14(8), 893–899 (2003)CrossRef
64.
Li, L., Kim, J.H., Shukor, M.H.A.: Grit blast assisted laser milling/grooving of metallic alloys. CIRP Ann. Manuf. Technol. 54(1), 183–186 (2005)CrossRef
65.
Malhotra, R., Saxena, I., Ehmann, K., Cao, J.: Laser-induced plasma micro-machining (LIPMM) for enhanced productivity and flexibility in laser-based micro-machining processes. CIRP Ann. Manuf. Technol. 62(1), 211–214 (2013)CrossRef
66.
Lee, S.W., Shin, H.S., Chu, C.N.: Fabrication of micro-pin array with high aspect ratio on stainless steel using nanosecond laser beam machining. Appl. Surf. Sci. 264, 653–663 (2013)CrossRef
67.
Samant, A.N., Dahotre, N.B.: Differences in physical phenomena governing laser machining of structural ceramics. Ceram. Int. 35(5), 2093–2097 (2009)CrossRef
68.
Samant, A.N., Dahotre, N.B.: An integrated computational approach to single-dimensional laser machining of magnesia. Opt. Lasers Eng. 47(5), 570–577 (2009)CrossRef
69.
Girardot, J., Schneider, M., Berthe, L., Favier, V.: Investigation of delamination mechanisms during a laser drilling on a cobalt-base superalloy. J. Mater. Process. Technol. 213(10), 1682–1691 (2013)CrossRef
70.
Voisey, K.T., Clyne, T.W.: Laser drilling of cooling holes through plasma sprayed thermal barrier coatings. Surf. Coat. Technol. 176(3), 296–306 (2004)CrossRef
71.
Yilbas, B.S., Akhtar, S.S., Karatas, C.: Laser trepanning of a small diameter hole in titanium alloy: temperature and stress fields. J. Mater. Process. Technol. 211(7), 1296–1304 (2011)CrossRef
72.
Tam, S.C., Yeo, C.Y., Jana, S., Lau, M.W.S., Lim, L.E.N., Yang, L.J., Noor, Y.M.: Optimization of laser deep-hole drilling of Inconel 718 using the Taguchi method. J. Mater. Process. Technol. 37(1–4), 741–757 (1993)CrossRef
73.
Mishra, S., Yadava, V.: Modeling and optimization of laser beam percussion drilling of thin aluminum sheet. Opt. Laser Technol. 48, 461–474 (2013)CrossRef
74.
Low, D.K.Y., Li, L., Byrd, P.J.: The effects of process parameters on spatter deposition in laser percussion drilling. Opt. Laser Technol. 32(5), 347–354 (2000)CrossRef
75.
Yan, Y., Ji, L., Bao, Y., Jiang, Y.: An experimental and numerical study on laser percussion drilling of thick-section alumina. J. Mater. Process. Technol. 212(6), 1257–1270 (2012)CrossRef
76.
Low, D.K.Y., Li, L., Corfe, A.G., Byrd, P.J.: Spatter-free laser percussion drilling of closely spaced array holes. Int. J. Mach. Tools Manuf. 41(3), 361–377 (2001)CrossRef
77.
Choudhury, I.A., Chong, W.C., Vahid, G.: Hole qualities in laser trepanning of polymeric materials. Opt. Lasers Eng. 50(9), 1297–1305 (2012)CrossRef
78.
He, D., Shinshi, T., Nakai, T.: Development of a maglev lens driving actuator for off-axis control and adjustment of the focal point in laser beam machining. Precis. Eng. 37(2), 255–264 (2013)CrossRef
79.
Lendraitis, V., Brikas, M., Snitka, V., Mizarienė, V., Raciukaitis, G.: Fabrication of actuator for nanopositioning using laser micro-machining. Microelectron. Eng. 83(4–9), 1212–1215 (2006)CrossRef
80.
Ng, G.K.L., Crouse, P.L., Li, L.: An analytical model for laser drilling incorporating effects of exothermic reaction, pulse width and hole geometry. Int. J. Heat Mass Transf. 49(7–8), 1358–1374 (2006)MATHCrossRef
81.
Beno, T., Hulling, U.: Measurement of cutting edge temperature in drilling. Procedia CIRP 3, 531–536 (2012)CrossRef
82.
Ashkenasi, D., Kaszemeikat, T., Mueller, N., Dietrich, R., Eichler, H.J., Illing, G.: Laser trepanning for industrial applications. Phys. Procedia 12(Part B), 323–331 (2011)
83.
Jahns, D., Kaszemeikat, T., Mueller, N., Ashkenasi, D., Dietrich, R., Eichler, H.J.: Laser trepanning of stainless steel. Phys. Procedia 41, 630–635 (2013)CrossRef
84.
Fornaroli, C., Holtkamp, J., Gillner, A.: Laser-beam helical drilling of high quality micro holes. Phys. Procedia 41, 661–669 (2013)CrossRef
85.
Man, H.C., Wang, Q., Guo, X.: Laser surface microdrilling of Ti and laser gas nitrided Ti for enhancing fixation of dental implants. Opt. Lasers Eng. 48(5), 583–588 (2010)CrossRef
86.
Jiao, J., Wang, X.: A numerical simulation of machining glass by dual CO2-laser beams. Opt. Laser Technol. 40(2), 297–301 (2008)CrossRef
87.
Wan, D., Liu, H., Wang, Y., Hu, D., Gui, Z.: CO2 laser beam modulating for surface texturing machining. Opt. Laser Technol. 40(2), 309–314 (2008)CrossRef
88.
Tsai, C.-H., Chen, H.-W.: Laser milling of cavity in ceramic substrate by fracture-machining element technique. J. Mater. Process. Technol. 136(1–3), 158–165 (2003)CrossRef
89.
Biswas, R., Kuar, A.S., Sarkar, S., Mitra, S.: A parametric study of pulsed Nd:YAG laser micro-drilling of gamma-titanium aluminide. Opt. Laser Technol. 42(1), 23–31 (2010)CrossRef
90.
Chang, C.-W., Kuo, C.-P.: An investigation of laser-assisted machining of Al2O3 ceramics planing. Int. J. Mach. Tools Manuf. 47(3–4), 452–461 (2007)CrossRef
91.
Germain, G., Dal Santo, P., Lebrun, J.L.: Comprehension of chip formation in laser assisted machining. Int. J. Mach. Tools Manuf. 51(3), 230–238 (2011)CrossRef
92.
Pfefferkorn, F.E., Incropera, F.P., Shin, Y.C.: Heat transfer model of semi-transparent ceramics undergoing laser-assisted machining. Int. J. Heat Mass Transf. 48(10), 1999–2012 (2005)CrossRef
93.
Tagliaferri, F., Leopardi, G., Semmler, U., Kuhl, M., Palumbo, B.: Study of the influences of laser parameters on laser assisted machining processes. Procedia CIRP 8, 170–175 (2013)CrossRef
94.
Chang, C.-W., Kuo, C.-P.: Evaluation of surface roughness in laser-assisted machining of aluminum oxide ceramics with Taguchi method. Int. J. Mach. Tools Manuf. 47(1), 141–147 (2007)CrossRef
95.
Bejjani, R., Shi, B., Attia, H., Balazinski, M.: Laser assisted turning of titanium metal matrix composite. CIRP Ann. Manuf. Technol. 60(1), 61–64 (2011)CrossRef
96.
Attia, H., Tavakoli, S., Vargas, R., Thomson, V.: Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions. CIRP Ann. Manuf. Technol. 59(1), 83–88 (2010)CrossRef
97.
García Navas, V., Arriola, I., Gonzalo, O., Leunda, J.: Mechanisms involved in the improvement of Inconel 718 machinability by laser assisted machining (LAM). Int. J. Mach. Tools Manuf. 74, 19–28 (2013)
98.
Rahman Rashid, R.A., Sun, S., Wang, G., Dargusch, M.S.: An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti–6Cr–5Mo–5V–4Al beta titanium alloy. Int. J. Mach. Tools Manuf. 63, 58–69 (2012)
99.
Rahman Rashid, R.A., Sun, S., Wang, G., Dargusch, M.S.: The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining. Int. J. Mach. Tools Manuf. 63, 41–43 (2012)
100.
Dumitrescu, P., Koshy, P., Stenekes, J., Elbestawi, M.A.: High-power diode laser assisted hard turning of AISI D2 tool steel. Int. J. Mach. Tools Manuf. 46(15), 2009–2016 (2006)CrossRef
101.
Zamani, H., Hermani, J.-P., Sonderegger, B., Sommitsch, C.: 3D simulation and process optimization of laser assisted milling of Ti6Al4V. Procedia CIRP 8, 75–80 (2013)CrossRef
102.
Masood, S.H., Armitage, K., Brandt, M.: An experimental study of laser-assisted machining of hard-to-wear white cast iron. Int. J. Mach. Tools Manuf. 51(6), 450–456 (2011)CrossRef
103.
Skvarenina, S., Shin, Y.C.: Laser-assisted machining of compacted graphite iron. Int. J. Mach. Tools Manuf. 46(1), 7–17 (2006)CrossRef
104.
Kim, D.-H., Lee, C.-M.: A study of cutting force and preheating-temperature prediction for laser-assisted milling of Inconel 718 and AISI 1045 steel. Int. J. Heat Mass Transf. 71, 264–274 (2014)CrossRef
105.
Dandekar, C.R., Shin, Y.C., Barnes, J.: Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining. Int. J. Mach. Tools Manuf. 50(2), 174–182 (2010)CrossRef
106.
Melkote, S., Kumar, M., Hashimoto, F., Lahoti, G.: Laser assisted micro-milling of hard-to-machine materials. CIRP Ann. Manuf. Technol. 58(1), 45–48 (2009)CrossRef
107.
Bermingham, M.J., Palanisamy, S., Dargusch, M.S.: Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V. Int. J. Mach. Tools Manuf. 62, 76–87 (2012)CrossRef
108.
Ding, H., Shin, Y.C.: Laser-assisted machining of hardened steel parts with surface integrity analysis. Int. J. Mach. Tools Manuf. 50(1), 106–114 (2010)CrossRef
109.
Yang, J., Sun, S., Brandt, M., Yan, W.: Experimental investigation and 3D finite element prediction of the heat affected zone during laser assisted machining of Ti6Al4V alloy. J. Mater. Process. Technol. 210(15), 2215–2222 (2010)CrossRef
110.
Singh, R., Alberts, M.J., Melkote, S.N.: Characterization and prediction of the heat-affected zone in a laser-assisted mechanical micromachining process. Int. J. Mach. Tools Manuf. 48(9), 994–1004 (2008)CrossRef
111.
Yilbas, B.S., Davies, R., Yilbas, Z.: Study into penetration speed during CO2 laser cutting of stainless steel. Opt. Lasers Eng. 17(2), 69–82 (1992)CrossRef
112.
Rozzi, J.C., Incropera, F.P., Shin, Y.C.: Transient, three-dimensional heat transfer model for the laser assisted machining of silicon nitride: II. Assessment of parametric effects. Int. J. Heat Mass Transf. 43(8), 1425–1437 (2000)MATHCrossRef
113.
Tian, Y., Shin, Y.C.: Thermal modeling for laser-assisted machining of silicon nitride ceramics with complex features. J. Manuf. Sci. Eng. 128(2), 425–434 (2005)CrossRef
114.
Venkatesan, K., Ramanujam, R., Kuppan, P.: Analysis of cutting forces and temperature in laser assisted machining of Inconel 718 using Taguchi method. Procedia Eng. 97, 1637–1646 (2014)CrossRef
115.
Attia, H., Tavakoli, S., Vargas, R., Thomson, V.: Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions. CIRP Ann. Manuf. Technol. 59(1), 83–88 (2010)CrossRef
116.
Rebro, P.A., Shin, Y.C., Incropera, F.P.: Design of operating conditions for crackfree laser-assisted machining of mullite. Int. J. Mach. Tools Manuf. 44(7–8), 677–694 (2004)CrossRef
117.
Venkatesan, K., Ramanujam, R., Kuppan, P.: Laser assisted machining of difficult to cut materials: research opportunities and future directions—a comprehensive review. Procedia Eng. 97, 1626–1636 (2014)CrossRef
118.
Stephen, A., Sepold, G., Metev, S., Vollertsen, F.: Laser-induced liquid-phase jet-chemical etching of metals. J. Mater. Process. Technol. 149(1–3), 536–540 (2004)CrossRef
119.
Zhu, D., Qu, N.S., Li, H.S., Zeng, Y.B., Li, D.L., Qian, S.Q.: Electrochemical micromachining of microstructures of micro hole and dimple array. CIRP Ann. Manuf. Technol. 58(1), 177–180 (2009)CrossRef
120.
Ali, S., Hinduja, S., Atkinson, J., Pandya, M.: Shaped tube electrochemical drilling of good quality holes. CIRP Ann. Manuf. Technol. 58(1), 185–188 (2009)CrossRef
121.
Jo, C.H., Kim, B.H., Chu, C.N.: Micro electrochemical machining for complex internal micro features. CIRP Ann. Manuf. Technol. 58(1), 181–184 (2009)CrossRef
122.
Curtis, D.T., Soo, S.L., Aspinwall, D.K., Sage, C.: Electrochemical superabrasive machining of a nickel-based aeroengine alloy using mounted grinding points. CIRP Ann. Manuf. Technol. 58(1), 173–176 (2009)CrossRef
123.
Kelly, J.J., Philipsen, H.G.G.: Anisotropy in the wet-etching of semiconductors. Curr. Opin. Solid State Mater. Sci. 9(1–2), 84–90 (2005)CrossRef
124.
Stephen, A.: Mechanisms and applications of laser chemical machining. Phys. Procedia 12(Part B), 261–267 (2011)
125.
Ting, H.T., Abou-El-hossein, K.A., Chua, H.B.: Review of micromachining of ceramics by etching. Trans. Nonferrous Met. Soc. China 19(Supplement 1), s1–s16 (2009)CrossRef
126.
Dausinger, F.: Femtosecond technology for precision manufacturing: fundamental and technical aspects. 50 (2003)
127.
Yamamura, K., Shimada, S., Mori, Y.: Damage-free improvement of thickness uniformity of quartz crystal wafer by plasma chemical vaporization machining. CIRP Ann. Manuf. Technol. 57(1), 567–570 (2008)CrossRef
128.
Stephen, A., Vollertsen, F.: Mechanisms and processing limits in laser thermochemical machining. CIRP Ann. Manuf. Technol. 59(1), 251–254 (2010)CrossRef
129.
Kurita, T., Kasashima, N., Yamakiri, H., Ichihashi, N., Kobayashi, N., Ashida, K., Sasaki, S.: Development of the new IC decapsulation technology. Opt. Lasers Eng. 49(9–10), 1216–1223 (2011)CrossRef
130.
Li, L., Achara, C.: Chemical assisted laser machining for the minimisation of recast and heat affected zone. CIRP Ann. Manuf. Technol. 53(1), 175–178 (2004)CrossRef
131.
Mehrafsun, S., Vollertsen, F.: Disturbance of material removal in laser-chemical machining by emerging gas. CIRP Ann. Manuf. Technol. 62(1), 195–198 (2013)CrossRef
132.
Matsuo, S., Sumi, H., Kiyama, S., Tomita, T., Hashimoto, S.: Femtosecond laser-assisted etching of Pyrex glass with aqueous solution of KOH. Appl. Surf. Sci. 255(24), 9758–9760 (2009)CrossRef
133.
Luo, S.-W., Tsai, H.-Y.: Fabrication of 3D photonic structure on glass materials by femtosecond laser modification with HF etching process. J. Mater. Process. Technol. 213(12), 2262–2269 (2013)CrossRef
134.
Lin, D., Zhang, M.Y., Ye, C., Liu, Z., Liu, C.R., Cheng, G.J.: Large scale, highly dense nanoholes on metal surfaces by underwater laser assisted hydrogen etching near nanocrystalline boundary. Appl. Surf. Sci. 258(10), 4254–4259 (2012)CrossRef
135.
Näth, O., Stephen, A., Rösler, J., Vollertsen, F.: Structuring of nanoporous nickel-based superalloy membranes via laser etching. J. Mater. Process. Technol. 209(10), 4739–4743 (2009)CrossRef
136.
Al-Khazraji, K.K., Rasheeda, B.G., Ibrahem, M.A., Mohammed, A.F.: Effect of laser-induced etching process on porous structures. Procedia Eng. 38, 1381–1390 (2012)CrossRef
137.
Kumar, R., Mavi, H.S., Shukla, A.K.: Macro and microsurface morphology reconstructions during laser-induced etching of silicon. Micron 39(3), 287–293 (2008)CrossRef
138.
Nayak, B.K., Gupta, M.C., Kolasinski, K.W.: Ultrafast-laser-assisted chemical restructuring of silicon and germanium surfaces. Appl. Surf. Sci. 253(15), 6580–6583 (2007)CrossRef
139.
Dai, Y.-T., Xu, G., Tong, X.-L.: Deep UV laser etching of GaN epilayers grown on sapphire substrate. J. Mater. Process. Technol. 212(2), 492–496 (2012)CrossRef
140.
Zhang, F., Duan, J., Zeng, X., Cao, Y.: UV laser microprocessing and post chemical etching on ultrathin Al2O3 ceramic substrate. J. Eur. Ceram. Soc. 31(9), 1631–1639 (2011)CrossRef
141.
Zimmer, K., Böhme, R., Pissadakis, S., Hartwig, L., Reisse, G., Rauschenbach, B.: Backside etching of fused silica with Nd:YAG laser. Appl. Surf. Sci. 253(5), 2796–2800 (2006)CrossRef
142.
Oh, K.H., Park, J.B., Cho, S.I., Im, H.D., Jeong, S.H.: Investigation of sidewall roughness of the microgrooves manufactured with laser-induced etching technique. Appl. Surf. Sci. 255(24), 9835–9839 (2009)CrossRef
143.
Luo, S.-W., Chang, T.-L., Tsai, H.-Y.: Fabrication of diffractive microlens array by femtosecond laser-assisted etching process. Microelectron. Eng. 98, 448–452 (2012)CrossRef
144.
Luo, S.-W., Chang, T.-L., Tsai, H.-Y.: Fabrication of glass micro-prisms using ultra-fast laser pulses with chemical etching process. Opt. Lasers Eng. 50(2), 220–225 (2012)CrossRef
145.
Datta, M., Landolt, D.: Fundamental aspects and applications of electrochemical microfabrication. Electrochim. Acta 45(15–16), 2535–2558 (2000)CrossRef
146.
Park, B.J., Kim, B.H., Chu, C.N.: The effects of tool electrode size on characteristics of micro electrochemical machining. CIRP Ann. Manuf. Technol. 55(1), 197–200 (2006)CrossRef
147.
Kasashima, N., Kurita, T.: Laser and electrochemical complex machining of micro-stent with on-machine three-dimensional measurement. Opt. Lasers Eng. 50(3), 354–358 (2012)CrossRef
148.
Pajak, P.T., Desilva, A.K.M., Harrison, D.K., Mcgeough, J.A.: Precision and efficiency of laser assisted jet electrochemical machining. Precis. Eng. 30(3), 288–298 (2006)CrossRef
149.
Long, Y., Shi, T., Xiong, L.: Excimer laser electrochemical etching n-Si in the KOH solution. Opt. Lasers Eng. 48(5), 570–574 (2010)CrossRef
150.
Kikuchi, T., Wachi, Y., Takahashi, T., Sakairi, M., Suzuki, R.O.: Fabrication of a meniscus microlens array made of anodic alumina by laser irradiation and electrochemical techniques. Electrochim. Acta 94, 269–276 (2013)CrossRef
151.
Shin, H.S., Park, M.S., Chu, C.N.: Electrochemical etching using laser masking for multilayered structures on stainless steel. CIRP Ann. Manuf. Technol. 59(1), 585–588 (2010)CrossRef
152.
Shin, H.S., Chung, D.K., Park, M.S., Chu, C.N.: Analysis of machining characteristics in electrochemical etching using laser masking. Appl. Surf. Sci. 258(5), 1689–1698 (2011)CrossRef
153.
Zhang, H., Xu, J., Wang, J.: Investigation of a novel hybrid process of laser drilling assisted with jet electrochemical machining. Opt. Lasers Eng. 47(11), 1242–1249 (2009)CrossRef
154.
Hua, Z., Jiawen, X.: Modeling and experimental investigation of laser drilling with jet electrochemical machining. Chin. J. Aeronaut. 23(4), 454–460 (2010)CrossRef
155.
De Silva, A.K.M., Pajak, P.T., McGeough, J.A., Harrison, D.K.: Thermal effects in laser assisted jet electrochemical machining. CIRP Ann. Manuf. Technol. 60(1), 243–246 (2011)CrossRef
156.
Pajak, P.T., De Silva, A.K.M., McGeough, J.A., Harrison, D.K.: Modelling the aspects of precision and efficiency in laser-assisted jet electrochemical machining (LAJECM). J. Mater. Process. Technol. 149(1–3), 512–518 (2004)CrossRef
157.
Tangwarodomnukun, V., Wang, J., Huang, C.Z., Zhu, H.T.: An investigation of hybrid laser–waterjet ablation of silicon substrates. Int. J. Mach. Tools Manuf. 56, 39–49 (2012)CrossRef
158.
Yang, G.W.: Laser ablation in liquids: applications in the synthesis of nanocrystals. Prog. Mater Sci. 52(4), 648–698 (2007)CrossRef
159.
Darwish, S., Ahmed, N., Alahmari, A.M., Mufti, N.A.: A comparison of laser beam machining of micro-channels under dry and wet mediums. Int. J. Adv. Manuf. Technol. 1–17 (2015)
160.
Dupont, A., Caminat, P., Bournot, P., Gauchon, J.P.: Enhancement of material ablation using 248, 308, 532, 1064 nm laser pulse with a water film on the treated surface. J. Appl. Phys. 78(3), 2022–2028 (1995)CrossRef
161.
Yan, Y., Li, L., Sezer, K., Wang, W., Whitehead, D., Ji, L., Bao, Y., Jiang, Y.: CO2 laser underwater machining of deep cavities in alumina. J. Eur. Ceram. Soc. 31(15), 2793–2807 (2011)CrossRef
162.
Choo, K.L., Ogawa, Y., Kanbargi, G., Otra, V., Raff, L.M., Komanduri, R.: Micromachining of silicon by short-pulse laser ablation in air and under water. Mater. Sci. Eng. A 372(1–2), 145–162 (2004)CrossRef
163.
Dolgaev, S.I., Lyalin, A.A., Shafeev, G.A., Voronov, S.: Fast etching and metallization of SiC ceramics with copper-vapor-laser radiation. Appl. Phys. A 63(1), 75–79 (1996)CrossRef
164.
Kruusing, A., Leppävuori, S., Uusimäki, A., Petrêtis, B., Makarova, O.: Micromachining of magnetic materials. Sens. Actuators Phys. 74(1–3), 45–51 (1999)CrossRef
165.
Geiger, M., Becker, W., Rebhan, T., Hutfless, J., Lutz, N.: Increase of efficiency for the XeCl excimer laser ablation of ceramics. Appl. Surf. Sci. 96–98, 309–315 (1996)CrossRef
166.
Geiger, M., Roth, S., Becker, W.: Microstructuring and surface modification by excimer laser machining under thin liquid films. 200–208 (1998)
167.
Ren, J., Kelly, M., Hesselink, L.: Laser ablation of silicon in water with nanosecond and femtosecond pulses. Opt. Lett. 30(13), 1740–1742 (2005)CrossRef
168.
Dowding, C.F., Lawrence, J.: Impact of open de-ionized water thin film laminar immersion on the liquid-immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Opt. Lasers Eng. 47(11), 1169–1176 (2009)CrossRef
169.
Daminelli, G., Krüger, J., Kautek, W.: Femtosecond laser interaction with silicon under water confinement. Thin Solid Films 467(1–2), 334–341 (2004)CrossRef
170.
Bärsch, N.: Improving laser ablation of zirconia by liquid films: multiple influence of liquids on surface machining and nanoparticle generation. J. Laser Micro/Nanoeng 4(1), 66–70 (2009)CrossRef
171.
Kruusing, A.: Underwater and water-assisted laser processing: Part 2—Etching, cutting and rarely used methods. Opt. Lasers Eng. 41(2), 329–352 (2004)CrossRef
172.
Patel, D.N., Singh, R.P., Thareja, R.K.: Craters and nanostructures with laser ablation of metal/metal alloy in air and liquid. Appl. Surf. Sci. 288, 550–557 (2014)CrossRef
173.
Stephan Roth, M.G.: Novel technique for high-quality microstructuring with excimer lasers (2000)
174.
Alahmari, A.M., Ahmed, N., Darwish, S.: Laser beam micro-machining under water immersion. Int. J. Adv. Manuf. Technol. 1–11 (2015)
175.
Zhu, S., Lu, Y.F., Hong, M.H., Chen, X.Y.: Laser ablation of solid substrates in water and ambient air. J. Appl. Phys. 89(4), 2400–2403 (2001)CrossRef
176.
Dowding, C., Lawrence, J.: Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Appl. Surf. Sci. 256(12), 3705–3713 (2010)CrossRef
177.
Peyre, P., Berthe, L., Scherpereel, X., Fabbro, R.: Laser-shock processing of aluminium-coated 55C1 steel in water-confinement regime, characterization and application to high-cycle fatigue behaviour. J. Mater. Sci. 33(6), 1421–1429 (1998)CrossRef
178.
Voronov, V.V., Dolgaev, S.I., Lyalin, A.A., Shafeev, G.A.: Laser-assisted etching of the surface of polycrystalline silicon carbide by copper-vapour laser radiation. Quantum Electron. 26(7), 621 (1996)CrossRef
179.
Ohara, M.N.O.J.: High aspect ratio etching by infrared laser induced micro bubbles. 175–179 (1997)
180.
Kaakkunen, J.J.J., Silvennoinen, M., Paivasaari, K., Vahimaa, P.: Water-assisted femtosecond laser pulse ablation of high aspect ratio holes. Phys. Procedia 12(Part B), 89–93 (2011)
181.
Morita, N., Ishida, S., Fujimori, Y., Ishikawa, K.: Pulsed laser processing of ceramics in water. Appl. Phys. Lett. 52, 1965 (1988)CrossRef
182.
Mahdieh, M.H., Nikbakht, M., Eghlimi Moghadam, Z., Sobhani, M.: Crater geometry characterization of Al targets irradiated by single pulse and pulse trains of Nd:YAG laser in ambient air and water. Appl. Surf. Sci. 256(6), 1778–1783 (2010)CrossRef
183.
Li, Y., Itoh, K., Watanabe, W., Yamada, K., Kuroda, D., Nishii, J., Jiang, Y.: Three-dimensional hole drilling of silica glass from the rear surface with femtosecond laser pulses. Opt. Lett. 26(23), 1912–1914 (2001)CrossRef
184.
Tsai, C.-H., Li, C.-C.: Investigation of underwater laser drilling for brittle substrates. J. Mater. Process. Technol. 209(6), 2838–2846 (2009)CrossRef
185.
Makridis, S.S., Gkanas, E.I., Panagakos, G., Kikkinides, E.S., Stubos, A.K., Wagener, P., Barcikowski, S.: Polymer-stable magnesium nanocomposites prepared by laser ablation for efficient hydrogen storage. Int. J. Hydrog. Energy 38(26), 11530–11535 (2013)CrossRef
186.
Kazakevich, P.V., Simakin, A.V., Voronov, V.V., Shafeev, G.A.: Laser induced synthesis of nanoparticles in liquids. Appl. Surf. Sci. 252(13), 4373–4380 (2006)CrossRef
187.
Semaltianos, N.G., Logothetidis, S., Frangis, N., Tsiaoussis, I., Perrie, W., Dearden, G., Watkins, K.G.: Laser ablation in water: a route to synthesize nanoparticles of titanium monoxide. Chem. Phys. Lett. 496(1–3), 113–116 (2010)CrossRef
188.
Zhang, J., Lan, C.Q.: Nickel and cobalt nanoparticles produced by laser ablation of solids in organic solution. Mater. Lett. 62(10–11), 1521–1524 (2008)CrossRef
189.
Piriyawong, V., Thongpool, V., Asanithi, P., Limsuwan, P.: Effect of laser pulse energy on the formation of alumina nanoparticles synthesized by laser ablation in water. Procedia Eng. 32, 1107–1112 (2012)CrossRef
190.
Elaboudi, I., Lazare, S., Belin, C., Bruneel, J.L., Servant, L.: Organic nanoparticles suspensions preparation by underwater excimer laser ablation of polycarbonate. Appl. Surf. Sci. 253(19), 7835–7839 (2007)CrossRef
191.
Mahfouz, R., Cadete Santos Aires, F.J., Brenier, A., Jacquier, B., Bertolini, J.C.: Synthesis and physico-chemical characteristics of nanosized particles produced by laser ablation of a nickel target in water. Appl. Surf. Sci. 254(16), 5181–5190 (2008)CrossRef
192.
Gondal, M.A., Saleh, T.A., Drmosh, Q.A.: Synthesis of nickel oxide nanoparticles using pulsed laser ablation in liquids and their optical characterization. Appl. Surf. Sci. 258(18), 6982–6986 (2012)CrossRef
193.
Huang, C.-N., Bow, J.-S., Zheng, Y., Chen, S.-Y., Ho, N.J., Shen, P.: Nonstoichiometric titanium oxides via pulsed laser ablation in water. Nanoscale Res. Lett. 5(6), 972–985 (2010)CrossRef
194.
Compagnini, G., Sinatra, M.G., Messina, G.C., Patanè, G., Scalese, S., Puglisi, O.: Monitoring the formation of inorganic fullerene-like MoS2 nanostructures by laser ablation in liquid environments. Appl. Surf. Sci. 258(15), 5672–5676 (2012)CrossRef
195.
Dolgaev, S.I., Simakin, A.V., Voronov, V.V., Shafeev, G.A., Bozon-Verduraz, F.: Nanoparticles produced by laser ablation of solids in liquid environment. Appl. Surf. Sci. 186(1–4), 546–551 (2002)CrossRef
196.
Kazakevich, P.V., Voronov, V.V., Simakin, A.V., Shafeev, G.A.: Production of copper and brass nanoparticles upon laser ablation in liquids. Quantum Electron. 34(10), 951–956 (2004)CrossRef
197.
Anikin, K.V., Melnik, N.N., Simakin, A.V., Shafeev, G.A., Voronov, V.V., Vitukhnovsky, A.G.: Formation of ZnSe and CdS quantum dots via laser ablation in liquids. Chem. Phys. Lett. 366(3–4), 357–360 (2002)CrossRef
198.
Ohadi, M., Choo, K., Dessiatoun, S., Cetegen, E.: Emerging applications of microchannels. In: Next Generation Microchannel Heat Exchangers, pp. 67–105. Springer, New York (2013)
199.
Wang, Z., Fan, J., Luo, K.: Combined multi-direct forcing and immersed boundary method for simulating flows with moving particles. Int. J. Multiph. Flow 34(3), 283–302 (2008)CrossRef
200.
Ponyavin, V., Chen, Y., Mohamed, T., Trabia, M., Wilson, M., Hechanova, A.E.: Modeling and parametric study of a ceramic high temperature heat exchanger and chemical decomposer. 1013–1020 (2006, Jan)
201.
Mei, D., Qian, M., Liu, B., Jin, B., Yao, Z., Chen, Z.: A micro-reactor with micro-pin-fin arrays for hydrogen production via methanol steam reforming. J. Power Sources 205, 367–376 (2012)CrossRef
202.
Sommers, A., Wang, Q., Han, X., T’Joen, C., Park, Y., Jacobi, A.: Ceramics and ceramic matrix composites for heat exchangers in advanced thermal systems—a review. Appl. Therm. Eng. 30(11–12), 1277–1291 (2010)CrossRef
203.
Goel, N., Goswami, D.Y.: A compact falling film absorber. J. Heat Transf. 127(9), 957 (2005)CrossRef
204.
Hessel, V., Ehrfeld, W., Golbig, K., Haverkamp, V., Löwe, H., Storz, M., Wille, C., Guber, A.E., Jähnisch, K., Baerns, M.: Gas/liquid microreactors for direct fluorination of aromatic compounds using elemental fluorine. In: Ehrfeld, P.D.W. (ed.) Microreaction Technology: Industrial Prospects, pp. 526–540. Springer, Heidelberg (2000)CrossRef
205.
Jähnisch, K., Baerns, M., Hessel, V., Ehrfeld, W., Haverkamp, V., Löwe, H., Wille, C., Guber, A.: Direct fluorination of toluene using elemental fluorine in gas/liquid microreactors. J. Fluor. Chem. 105(1), 117–128 (2000)CrossRef
206.
Abdallah, B., Chao, T.-C., Fromme, P., Ros, A.: Size based nanoparticle separation using dielectrophoretic focusing for femtosecond nanocrystallography of membrane proteins. In: Proceedings of Mu TAS International Conference on Miniaturized Chemistry and Biochemical Analysis System, vol. 2012, pp. 458–460 (2012)
207.
Jenks, J., Narayanan, V.: Effect of channel geometry variations on the performance of a constrained microscale-film ammonia-water bubble absorber. J. Heat Transf. 130(11), 112402 (2008)CrossRef
208.
Marquardt, E.D., Radebaugh, R., Dobak, J.: A cryogenic catheter for treating heart arrhythmia. In: Kittel, P. (ed.) Advances in Cryogenic Engineering, pp. 903–910. Springer, US (1998)CrossRef
209.
Campbell, G.O., Fryer, J.M.: Microchannel cooling device for small heat sources. US7836940 B2, 23 Nov 2010
210.
Cotter, T.P.: Principles and prospects for micro heat pipes. NASA STIRecon Technical Report N, 84 (1984, Apr)
211.
Kang, S.-W., Huang, D.: Fabrication of star grooves and rhombus grooves micro heat pipe. J. Micromech. Microeng. 12(5), 525 (2002)CrossRef
212.
Berre, M.L., Launay, S., Sartre, V., Lallemand, M.: Fabrication and experimental investigation of silicon micro heat pipes for cooling electronics. J. Micromech. Microeng. 13(3), 436 (2003)CrossRef
213.
Youn, Y.J., Kim, S.J.: Development of a compact micro pulsating heat pipe, p. T10133 (2011, Jan)
214.
Lim, H.T., Kim, S.H., Im, H.D., Oh, K.H., Jeong, S.H.: Fabrication and evaluation of a copper flat micro heat pipe working under adverse-gravity orientation. J. Micromech. Microeng. 18(10), 105013 (2008)CrossRef
215.
Klocke, F., Zeis, M., Klink, A., Veselovac, D.: Technological and economical comparison of roughing strategies via milling, sinking-EDM, wire-EDM and ECM for titanium- and nickel-based blisks. CIRP J. Manuf. Sci. Technol. 6(3), 198–203 (2013)CrossRef
216.
Aramcharoen, A., Mativenga, P.T., Yang, S., Cooke, K.E., Teer, D.G.: Evaluation and selection of hard coatings for micro milling of hardened tool steel. Int. J. Mach. Tools Manuf. 48(14), 1578–1584 (2008)CrossRef
217.
Ucun, İ., Aslantas, K., Bedir, F.: The performance Of DLC-coated and uncoated ultra-fine carbide tools in micromilling of Inconel 718. Precis. Eng. 41, 135–144 (2015)CrossRef
218.
Ucun, İ., Aslantas, K., Bedir, F.: An experimental investigation of the effect of coating material on tool wear in micro milling of Inconel 718 super alloy. Wear 300(1–2), 8–19 (2013)CrossRef
219.
Dornfeld, D., Min, S., Takeuchi, Y.: Recent advances in mechanical micromachining. CIRP Ann. Manuf. Technol. 55(2), 745–768 (2006)CrossRef
220.
Vazquez, E., Gomar, J., Ciurana, J., Rodríguez, C.A.: Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V. J. Clean. Prod. 87, 906–913 (2015)CrossRef
221.
Xu, J., Shi, L., Wang, C., Shan, D., Guo, B.: Micro hot embossing of micro-array channels in ultrafine-grained pure aluminum using a silicon die. J. Mater. Process. Technol. 225, 375–384 (2015)CrossRef
222.
Gau, J.-T., Gu, H., Liu, X., Huang, K.-M., Lin, B.-T.: Forming micro channels on aluminum foils by using flexible die forming process. J. Manuf. Process. 19, 102–111 (2015)CrossRef
223.
Jin, C.K., Kang, C.G.: Fabrication by vacuum die casting and simulation of aluminum bipolar plates with micro-channels on both sides for proton exchange membrane (PEM) fuel cells. Int. J. Hydrog. Energy 37(2), 1661–1676 (2012)CrossRef
224.
Deng, D., Wan, W., Tang, Y., Wan, Z., Liang, D.: Experimental investigations on flow boiling performance of reentrant and rectangular microchannels—a comparative study. Int. J. Heat Mass Transf. 82, 435–446 (2015)CrossRef
225.
Jahan, M.P., Kakavand, P., Kwang, E.L.M., Rahman, M., Wong, Y.S.: An experimental investigation into the micro-electro-discharge machining behaviour of aluminium alloy (AA 2024). Int. J. Adv. Manuf. Technol. 78(5–8), 1127–1139 (2014)
226.
Rajurkar, K.P., Sundaram, M.M., Malshe, A.P.: Review of electrochemical and electrodischarge machining. Procedia CIRP 6, 13–26 (2013)CrossRef
227.
Izquierdo, B., Plaza, S., Sánchez, J.A., Pombo, I., Ortega, N.: Numerical prediction of heat affected layer in the EDM of aeronautical alloys. Appl. Surf. Sci. 259, 780–790 (2012)CrossRef
228.
Li, L., Wei, X.T., Li, Z.Y.: Surface integrity evolution and machining efficiency analysis of W-EDM of nickel-based alloy. Appl. Surf. Sci. 313, 138–143 (2014)CrossRef
229.
Tsai, H.C., Yan, B.H., Huang, F.Y.: EDM performance of Cr/Cu-based composite electrodes. Int. J. Mach. Tools Manuf. 43(3), 245–252 (2003)CrossRef
230.
Wang, C.-C., Chow, H.-M., Yang, L.-D., Lu, C.-T.: Recast layer removal after electrical discharge machining via Taguchi analysis: a feasibility study. J. Mater. Process. Technol. 209(8), 4134–4140 (2009)CrossRef
231.
Beach, R., Benett, W.J., Freitas, B.L., Mundinger, D., Comaskey, B.J., Solarz, R.W., Emanuel, M.: Modular microchannel cooled heatsinks for high average power laser diode arrays. IEEE J. Quantum Electron. 28(4), 966–976 (1992)CrossRef
232.
Nieto, D., Delgado, T., Flores-Arias, M.T.: Fabrication of microchannels on soda-lime glass substrates with a Nd:YVO4 laser. Opt. Lasers Eng. 63, 11–18 (2014)CrossRef
233.
Suriano, R., Kuznetsov, A., Eaton, S.M., Kiyan, R., Cerullo, G., Osellame, R., Chichkov, B.N., Levi, M., Turri, S.: Femtosecond laser ablation of polymeric substrates for the fabrication of microfluidic channels. Appl. Surf. Sci. 257(14), 6243–6250 (2011)CrossRef
234.
Vázquez, E., Ciurana, J., Rodríguez, C.A., Thepsonthi, T., Özel, T.: Swarm intelligent selection and optimization of machining system parameters for microchannel fabrication in medical devices. Mater. Manuf. Process. 26(3), 403–414 (2011)CrossRef
235.
Kumar, A., Gupta, M.C.: Laser machining of micro-notches for fatigue life. Opt. Lasers Eng. 48(6), 690–697 (2010)CrossRef
236.
Teixidor, D., Ferrer, I., Ciurana, J., Özel, T.: Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel. Robot. Comput. Integr. Manuf. 29(1), 209–218 (2013)CrossRef
237.
Teixidor, D., Thepsonthi, T., Ciurana, J., Özel, T.: Nanosecond pulsed laser micromachining of PMMA-based microfluidic channels. J. Manuf. Process. 14(4), 435–442 (2012)CrossRef
238.
Francescon, A., Mapelli, A., Nuessle, G., Petagna, P., Pezous, A., Renaud, P., Romagnoli, G.: Application of micro-channel cooling to the local thermal management of detectors electronics for particle physics. Microelectron. J. 44(7), 612–618 (2013)CrossRef
239.
Xu, J., Gan, Y., Zhang, D., Li, X.: Microscale boiling heat transfer in a micro-timescale at high heat fluxes. J. Micromech. Microeng. 15(2), 362 (2005)CrossRef
240.
Gómez, D., Goenaga, I.: On the incubation effect on two thermoplastics when irradiated with ultrashort laser pulses: broadening effects when machining microchannels. Appl. Surf. Sci. 253(4), 2230–2236 (2006)CrossRef
241.
Prakash, S., Kumar, S.: Fabrication of microchannels on transparent PMMA using CO2 laser (10.6 μm) for microfluidic applications: an experimental investigation. Int. J. Precis. Eng. Manuf. 16(2), 361–366 (2015)MathSciNetCrossRef
242.
Wu, Z., Yan, H., Chen, H., Huang, H.: One-stage fabrication of sub-micron hydrophilic microchannels on PDMS. Appl. Surf. Sci. 255(8), 4702–4704 (2009)CrossRef
243.
Holmberg, P., Pasiskevicius, V., Fokine, M.: Study of incubation effects during surface ablation using picosecond pulses at a wavelength of 800 nm. Phys. Status Solidi C 8(9), 2862–2865 (2011)CrossRef
244.
Wang, Y., Sefiane, K., Harmand, S.: Flow boiling in high-aspect ratio mini- and micro-channels with FC-72 and ethanol: experimental results and heat transfer correlation assessments. Exp. Therm. Fluid Sci. 36, 93–106 (2012)CrossRef
245.
Wu, H.Y., Cheng, P.: Boiling instability in parallel silicon microchannels at different heat flux. Int. J. Heat Mass Transf. 47(17–18), 3631–3641 (2004)CrossRef
246.
Yang, L.-J., Chen, Y.-T., Kang, S.-W., Wang, Y.-C.: Fabrication of SU-8 embedded microchannels with circular cross-section. Int. J. Mach. Tools Manuf. 44(10), 1109–1114 (2004)CrossRef
247.
Madhour, Y., Olivier, J., Costa-Patry, E., Paredes, S., Michel, B., Thome, J.R.: Flow boiling of R134a in a multi-microchannel heat sink with hotspot heaters for energy-efficient microelectronic CPU cooling applications. IEEE Trans. Compon. Packag. Manuf. Technol. 1(6), 873–883 (2011)CrossRef
248.
Beer, N., Özkaya, E., Biermann, D.: Drilling of Inconel 718 with geometry-modified twist drills. Procedia CIRP 24, 49–55 (2014)CrossRef
249.
Woon, K.S., Chaudhari, A., Kumar, A.S., Rahman, M.: The effects of tool degradation on hole straightness in deep hole gundrilling of Inconel-718. Procedia CIRP 14, 593–598 (2014)CrossRef
250.
Sharman, A.R.C., Hughes, J.I., Ridgway, K.: An analysis of the residual stresses generated in Inconel 718TM when turning. J. Mater. Process. Technol. 173(3), 359–367 (2006)CrossRef
251.
Madariaga, A., Esnaola, J.A., Fernandez, E., Arrazola, P.J., Garay, A., Morel, F.: Analysis of residual stress and work-hardened profiles on Inconel 718 when face turning with large-nose radius tools. Int. J. Adv. Manuf. Technol. 71(9–12), 1587–1598 (2014)CrossRef
252.
Devillez, A., Le Coz, G., Dominiak, S., Dudzinski, D.: Dry machining of Inconel 718, workpiece surface integrity. J. Mater. Process. Technol. 211(10), 1590–1598 (2011)CrossRef
253.
Choudhury, I.A., El-Baradie, M.A.: Machinability of nickel-base super alloys: a general review. J. Mater. Process. Technol. 77(1–3), 278–284 (1998)CrossRef
254.
Klocke, F., Welling, D., Klink, A., Veselovac, D., Nöthe, T., Perez, R.: Evaluation of advanced wire-EDM capabilities for the manufacture of fir tree slots in Inconel 718. Procedia CIRP 14, 430–435 (2014)CrossRef
255.
Manohar, M., Selvaraj, T., Sivakumar, D., Gopinath, S., George, K.M.: Experimental study to assess the effect of electrode bottom profiles while machining Inconel 718 through EDM process. Procedia Mater. Sci. 6, 92–104 (2014)CrossRef
256.
Beri, N., Maheshwari, S., Sharma, C., Kumar, A.: Surface quality modification using powder metallurgy processed CuW electrode during electric discharge machining of Inconel 718. Procedia Mater. Sci. 5, 2629–2634 (2014)CrossRef
257.
Ekmekci, B.: Residual stresses and white layer in electric discharge machining (EDM). Appl. Surf. Sci. 253(23), 9234–9240 (2007)CrossRef
258.
Aspinwall, D.K., Soo, S.L., Berrisford, A.E., Walder, G.: Workpiece surface roughness and integrity after WEDM of Ti–6Al–4V and Inconel 718 using minimum damage generator technology. CIRP Ann. Manuf. Technol. 57(1), 187–190 (2008)CrossRef
259.
Jeelani, S., Collins, M.R.: Effect of electric discharge machining on the fatigue life of Inconel 718. Int. J. Fatigue 10(2), 121–125 (1988)CrossRef
260.
Lin, M., Tsao, C., Hsu, C., Chiou, A., Huang, P., Lin, Y.: Optimization of micro milling electrical discharge machining of Inconel 718 by Grey-Taguchi method. Trans. Nonferrous Met. Soc. China 23(3), 661–666 (2013)CrossRef
261.
Huang, C.A., Chen, Y.C., Chang, J.H.: The electrochemical polishing behavior of the Inconel 718 alloy in perchloric–acetic mixed acids. Corros. Sci. 50(2), 480–489 (2008)CrossRef
262.
Klocke, F., Zeis, M., Herrig, T., Harst, S., Klink, A.: Optical in situ measurements and interdisciplinary modeling of the electrochemical sinking process of Inconel 718. Procedia CIRP 24, 114–119 (2014)CrossRef
263.
Wang, D., Zhu, Z., Wang, N., Zhu, D., Wang, H.: Investigation of the electrochemical dissolution behavior of Inconel 718 and 304 stainless steel at low current density in NaNO3 solution. Electrochim. Acta 156, 301–307 (2015)CrossRef
264.
Escobar-Palafox, G.A., Gault, R.S., Ridgway, K.: Characterisation of abrasive water-jet process for pocket milling in Inconel 718. Procedia CIRP 1, 404–408 (2012)CrossRef
265.
Çaydaş, U., Hasçalık, A.: A study on surface roughness in abrasive waterjet machining process using artificial neural networks and regression analysis method. J. Mater. Process. Technol. 202(1–3), 574–582 (2008)CrossRef
266.
Axinte, D.A., Karpuschewski, B., Kong, M.C., Beaucamp, A.T., Anwar, S., Miller, D., Petzel, M.: High energy fluid jet machining (HEFJet-Mach): from scientific and technological advances to niche industrial applications. CIRP Ann. Manuf. Technol. 63(2), 751–771 (2014)CrossRef
267.
Hashish, M.: Optimization factors in abrasive-waterjet machining. J. Manuf. Sci. Eng. 113(1), 29–37 (1991)CrossRef
268.
Sadasivam, B., Hizal, A., Park, S., Arola, D.: An evaluation of abrasive waterjet peening with elastic prestress. J. Manuf. Sci. Eng. 131(1), 011010 (2009)CrossRef
269.
Yünlü, L., Çolak, O., Kurbanoğlu, C.: Taguchi DOE analysis of surface integrity for high pressure jet assisted machining of Inconel 718. Procedia CIRP 13, 333–338 (2014)CrossRef
270.
Hsu, C.Y., Lin, Y.Y., Lee, W.S., Lo, S.P.: Machining characteristics of Inconel 718 using ultrasonic and high temperature-aided cutting. J. Mater. Process. Technol. 198(1–3), 359–365 (2008)CrossRef
271.
Liao, Y.S., Chen, Y.C., Lin, H.M.: Feasibility study of the ultrasonic vibration assisted drilling of Inconel superalloy. Int. J. Mach. Tools Manuf. 47(12–13), 1988–1996 (2007)CrossRef
272.
Bhaduri, D., Soo, S.L., Novovic, D., Aspinwall, D.K., Harden, P., Waterhouse, C., Bohr, S., Mathieson, A.C., Lucas, M.: Ultrasonic assisted creep feed grinding of Inconel 718. Procedia CIRP 6, 615–620 (2013)CrossRef
273.
Brehl, D.E., Dow, T.A.: Review of vibration-assisted machining. Precis. Eng. 32(3), 153–172 (2008)CrossRef
274.
Mitrofanov, A.V., Ahmed, N., Babitsky, V.I., Silberschmidt, V.V.: Effect of lubrication and cutting parameters on ultrasonically assisted turning of Inconel 718. J. Mater. Process. Technol. 162–163, 649–654 (2005)CrossRef
275.
Leshock, C.E., Kim, J.-N., Shin, Y.C.: Plasma enhanced machining of Inconel 718: modeling of workpiece temperature with plasma heating and experimental results. Int. J. Mach. Tools Manuf. 41(6), 877–897 (2001)CrossRef
276.
García Navas, V., Arriola, I., Gonzalo, O., Leunda, J.: Mechanisms involved in the improvement of Inconel 718 machinability by laser assisted machining (LAM). Int. J. Mach. Tools Manuf. 74, 19–28 (2013)
277.
Abdul Aleem, B.J., Hashmi, Yilbas, B.S.: Laser controlled melting of pre-prepared Inconel 718 alloy surface. Opt. Lasers Eng. 49(11), 1314–1319 (2011)
278.
Yilbas, B.S., Akhtar, S.S., Karatas, C.: Laser surface treatment of Inconel 718 alloy: thermal stress analysis. Opt. Lasers Eng. 48(7–8), 740–749 (2010)CrossRef
279.
Pusavec, F., Hamdi, H., Kopac, J., Jawahir, I.S.: Surface integrity in cryogenic machining of nickel based alloy—Inconel 718. J. Mater. Process. Technol. 211(4), 773–783 (2011)CrossRef
280.
Tam, S.C., Yeo, C.Y., Jana, S., Lau, M.W.S., Lim, L.E.N., Yang, L.J., Noor, Y.M.: Optimization of laser deep-hole drilling of Inconel 718 using the Taguchi method. J. Mater. Process. Technol. 37(1–4), 741–757 (1993)CrossRef
281.
Ahn, D.-G., Byun, K.-W.: Influence of cutting parameters on surface characteristics of cut section in cutting of Inconel 718 sheet using CW Nd:YAG laser. Trans. Nonferrous Met. Soc. China 19(Supplement 1), s32–s39 (2009)CrossRef
282.
Hasçalık, A., Ay, M.: CO2 laser cut quality of Inconel 718 nicklel—based superalloy. Opt. Laser Technol. 48, 554–564 (2013)CrossRef
Metadata
Title
Laser Beam Machining, Laser Beam Hybrid Machining, and Micro-channels Applications and Fabrication Techniques
Authors
Saied Darwish
Naveed Ahmed
Abdulrahman M. Alahmari
Copyright Year
2016
Publisher
Springer Singapore
Book
Machining, Joining and Modifications of Advanced Materials

Print ISBN: 978-981-10-1081-1

Electronic ISBN: 978-981-10-1082-8

Copyright Year: 2016

DOI
https://doi.org/10.1007/978-981-10-1082-8_17

Premium Partners

    Image Credits