Top

Rare Metals

Published in:

02-01-2024 | Original Article

Lignin-reinforced PVDF electrolyte for dendrite-free quasi-solid-state Li metal battery

Authors: Xin-Yang Chen, Xue-Jie Gao, Han-Yan Wu, Yu-Long Liu, Xiao-Fei Yang, Run-Cang Sun

Published in: Rare Metals | Issue 3/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Quasi-solid-state lithium metal batteries (QSSLMBs) assembled with polyvinylidene fluoride (PVDF) are a promising class of next-generation rechargeable batteries due to their safety, high energy density, and superior interfacial properties. However, PVDF has a series of inherent drawbacks such as low ionic conductivity, ease of crystallization, and hydrophobic character that leading to poor cell properties. To tackle these issues, a lignin-reinforced PVDF electrolyte is proposed in this work to solve these drawbacks of PVDF and enhance the comprehensive performance of QSSBs. The lithophilic polar groups of lignin can promote uniform deposition of Li on the electrodes. Cooperating with the improved mechanical properties can efficiently prevent Li dendrites penetration through the separator. In addition, more active sites provided by lignin can also enhance Li⁺ transport and lead to a faster electrochemical reaction kinetic. Benefitting from the ingenious design, Li symmetric cells with 5% lignin-PVDF quasi-solid-state electrolyte can operate for 900 h at a high current density/capacity of 5 mA·cm⁻²/5 mAh·cm⁻², while short-circuiting occurs after 56 h for the counterpart (pure PVDF). Moreover, a full cell of Li/5% lignin-PVDF/LFP cell demonstrates a high capacity of 96.2 mAh·g⁻¹ after 2000 cycles at 10 C. This work is expected to open up promising opportunities to develop other high-energy/power-density QSSLMBs.

Graphical abstract

previous article Charge regulation by ferromagnetic metal/LiF spin-polarized interface for high-performance Li metal anodes

next article Monothetic and conductive network and mechanical stress releasing layer on micron-silicon anode enabling high-energy solid-state battery

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

[1]

Xu W, Wang JL, Ding F, Chen XL, Nasybulin E, Zhang YH, Zhang JG. Lithium metal anodes for rechargeable batteries. Energy Environ Sci. 2014;7(2):513. https://doi.org/10.1039/C3EE40795K.CrossRef

[2]

Aurbach D, Markevich E, Salitra G. High energy density rechargeable batteries based on li metal anodes. The role of unique surface chemistry developed in solutions containing fluorinated organic co-solvents. J Am Chem Soc. 2021;143(50):21161. https://doi.org/10.1021/jacs.1c11315.CrossRefPubMed

[3]

Liu B, Zhang JG, Xu W. Advancing lithium metal batteries. Joule. 2018;2(5):833. https://doi.org/10.1016/j.joule.2018.03.008.CrossRef

[4]

Lin D, Liu Y, Cui Y. Reviving the lithium metal anode for high-energy batteries. Nat Nanotechnol. 2017;12(3):194. https://doi.org/10.1038/nnano.2017.16.CrossRefPubMedADS

[5]

Zhang X, Sun C. Recent advances in dendrite-free lithium metal anodes for high-performance batteries. Chem Chem Phys. 2022;24(34):19996. https://doi.org/10.1039/D2CP01655A.CrossRef

[6]

Zhang LS, Gao XL, Liu XH, Zhang ZJ, Cao R, Cheng HC, Wang MY, Yan XY, Yang SC. CHAIN: unlocking informatics-aided design of Li metal anode from materials to applications. Rare Met. 2022;41(5):1477. https://doi.org/10.1007/s12598-021-01925-8. CrossRef

[7]

Li M, Cheng LL, Yang YM, Niu F, Zhang X, Liu DH. Development of technology for spent lithium-ion batteries recycling: a review. Chin J Rare Met. 2022;46(3):349. https://doi.org/10.13373/j.cnki.cjrm.XY20020020. CrossRef

[8]

Kim J-S, Yoon G, Kim S, Sugata S, Yashiro N, Suzuki S, Lee MJ, Kim R, Badding M, Song Z, Chang J, Im D. Surface engineering of inorganic solid-state electrolytes via interlayers strategy for developing long-cycling quasi-all-solid-state lithium batteries. Nat Commun. 2023;14(1):782. https://doi.org/10.1038/s41467-023-36401-7.CrossRefPubMedPubMedCentralADS

[9]

Gao XL, Liu XH, Xie WL, Zhang LS, Yang SC. Multiscale observation of Li plating for lithium-ion batteries. Rare Met. 2021;40(11):3038. https://doi.org/10.1007/s12598-021-01730-3.CrossRef

[10]

Liu Y, Xu X, Kapitanova OO, Evdokimov PV, Song Z, Matic A, Xiong S. Electro-chemo-mechanical modeling of artificial solid electrolyte interphase to enable uniform electrodeposition of lithium metal anodes. Adv Energy Mater. 2022;12(9):2103589. https://doi.org/10.1002/aenm.202103589.CrossRef

[11]

Xu X, Liu Y, Kapitanova OO, Song Z, Sun J, Xiong S. Electro-chemo-mechanical failure of solid electrolytes induced by growth of internal lithium filaments. Adv Mater. 2022;34(49):2207232. https://doi.org/10.1002/adma.202207232.CrossRef

[12]

Lu Y, Tu Z, Archer LA. Stable lithium electrodeposition in liquid and nanoporous solid electrolytes. Nat Mater. 2014;13(10):961. https://doi.org/10.1038/nmat4041.CrossRefPubMedADS

[13]

Cao D, Sun X, Li Q, Natan A, Xiang P, Zhu H. Lithium dendrite in all-solid-state batteries: growth mechanisms, suppression strategies, and characterizations. Matter. 2020;3(1):57. https://doi.org/10.1016/j.matt.2020.03.015.CrossRef

[14]

Wang C, Kim JT, Wang C, Sun X. Progress and prospects of inorganic solid-state electrolyte-based all-solid-state pouch cells. Adv Mater. 2023;35(19):2209074. https://doi.org/10.1002/adma.202209074.CrossRef

[15]

Liu Y, Meng X, Wang Z, Qiu J. A Li₂S-based all-solid-state battery with high energy and superior safety. Sci Adv. 2022;8(1):eabl8390. https://doi.org/10.1126/sciadv.abl8390.CrossRefPubMedPubMedCentralADS

[16]

Li Q, Sun X, Cao D, Wang Y, Luan P, Zhu H. Versatile electrospinning for structural designs and ionic conductor orientation in all-solid-state lithium batteries. Electrochem Energy Rev. 2022;5(4):18. https://doi.org/10.1007/s41918-022-00170-6.CrossRef

[17]

Sun C, Liu J, Gong Y, Wilkinson DP, Zhang J. Recent advances in all-solid-state rechargeable lithium batteries. Nano Energy. 2017;33:363. https://doi.org/10.1016/j.nanoen.2017.01.028.CrossRef

[18]

Gao Y, Cui BF, Wang JJ, Sun ZY, Chen Q, Deng YD, Han XP, Hu WB. Improving Li reversibility in Li metal batteries through uniform dispersion of Ag nanoparticles on graphene. Rare Met. 2022;41(10):3391. https://doi.org/10.1007/s12598-022-02044-8.

[19]

Wang T, Lu L, Sun C. A long life solid-state lithium-oxygen battery enabled by a durable oxygen deficient flower-like CeO₂ microsphere based solid electrolyte. Inorg Chem Front. 2022;9(11):2508. https://doi.org/10.1039/D2QI00508E.CrossRef

[20]

Wang Z, Shen L, Deng S, Cui P, Yao X. 10 μm-thick high-strength solid polymer electrolytes with excellent interface compatibility for flexible all-solid-state lithium-metal batteries. Adv Mater. 2021;33(25):2100353. https://doi.org/10.1002/adma.202100353.CrossRef

[21]

Zhang Z, Wang J, Jin Y, Liu G, Yang S, Yao X. Insights on lithium plating behavior in graphite-based all-solid-state lithium-ion batteries. Energy Storage Mater. 2023;54:845. https://doi.org/10.1016/j.ensm.2022.11.023.CrossRef

[22]

Wei C, Yu C, Wang R, Peng L, Chen S, Miao X, Cheng S, Xie J. Sb and O dual doping of Chlorine-rich lithium argyrodite to improve air stability and lithium compatibility for all-solid-state batteries. J Power Sources. 2023;559:232659. https://doi.org/10.1016/j.jpowsour.2023.232659.CrossRef

[23]

Lee YG, Fujiki S, Jung C, Suzuki N, Yashiro N, Omoda R, Ko DS, Shiratsuchi T, Sugimoto T, Ryu S, Ku JH, Watanabe T, Park Y, Aihara Y, Im D, Han IT. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes. Nat Energy. 2020;5(4):299. https://doi.org/10.1038/s41560-020-0575-z.CrossRefADS

[24]

Hu Z, Wang C, Wang C, Chen B, Yang C, Dong S, Cui G. Uncovering the critical impact of the solid electrolyte interphase structure on the interfacial stability. InfoMat. 2022;4(3):e12249. https://doi.org/10.1002/inf2.12249.CrossRef

[25]

Zhao X, Xiang P, Wu J, Liu Z, Shen L, Liu G, Tian Z, Chen L, Yao X. Toluene tolerated Li_9.88GeP1.96Sb_0.04S_11.88C_l0.12 solid electrolyte toward ultrathin membranes for all-solid-state lithium batteries. Nano Lett. 2023;23(1):227. https://doi.org/10.1021/acs.nanolett.2c04140.CrossRefPubMedADS

[26]

Chi X, Li M, Di J, Bai P, Song L, Wang X, Li F, Liang S, Xu J, Yu J. A highly stable and flexible zeolite electrolyte solid-state Li–air battery. Nature. 2021;592(7855):551. https://doi.org/10.1038/s41586-021-03410-9.CrossRefPubMedADS

[27]

Kim SH, Choe UJ, Kim NY, Lee SY. Fibrous skeleton-framed, flexible high-energy-density quasi-solid-state lithium metal batteries. Battery Energy. 2022;1(1):20210012. https://doi.org/10.1002/bte2.20210012.CrossRef

[28]

Zhou D, Shanmukaraj D, Tkacheva A, Armand M, Wang G. Polymer electrolytes for lithium-based batteries: advances and prospects. Chem. 2019;5(9):2326. https://doi.org/10.1016/j.chempr.2019.05.009.CrossRef

[29]

Castillo J, Santiago A, Judez X, Garbayo I, Coca Clemente JA, Morant-Miñana MC, Villaverde A, González-Marcos JA, Zhang H, Armand M, Li C. Safe, flexible, and high-performing gel-polymer electrolyte for rechargeable lithium metal batteries. Chem Mater. 2021;33(22):8812. https://doi.org/10.1021/acs.chemmater.1c02952.CrossRef

[30]

Yi Q, Zhang W, Wang T, Han J, Sun C. A high-performance lithium metal battery with a multilayer hybrid electrolyte. Energy Environ Mater. 2023;6(1):e12289. https://doi.org/10.1002/eem2.12289.CrossRef

[31]

Chang Z, Yang H, Zhu X, He P, Zhou H. A stable quasi-solid electrolyte improves the safe operation of highly efficient lithium-metal pouch cells in harsh environments. Nat Commun. 2022;13(1):1510. https://doi.org/10.1038/s41467-022-29118-6.CrossRefPubMedPubMedCentralADS

[32]

Zhang X, Liu T, Zhang S, Huang X, Xu B, Lin Y, Xu B, Li L, Nan C-W, Shen Y. Synergistic coupling between Li_6.75La₃Zr_1.75Ta_0.25O₁₂ and poly(vinylidene fluoride) induces high ionic conductivity, mechanical strength, and thermal stability of solid composite electrolytes. J Am Chem Soc. 2017;139(39):13779. https://doi.org/10.1021/jacs.7b06364.CrossRefPubMed

[33]

Marshall JE, Zhenova A, Roberts S, Petchey T, Zhu P, Dancer CEJ, McElroy CR, Kendrick E, Goodship V. On the solubility and stability of polyvinylidene fluoride. Polymers. 2021;13(9):1354. https://doi.org/10.3390/polym13091354.CrossRefPubMedPubMedCentral

[34]

Liu Q, Liu R, Cui Y, Zhou M, Zeng J, Zheng B, Liu S, Zhu Y, Wu D. Dendrite-free and long-cycling lithium metal battery enabled by ultrathin, 2d shield-defensive, and single lithium-ion conducting polymeric membrane. Adv Mater. 2022;34(33):2108437. https://doi.org/10.1002/adma.202108437.CrossRef

[35]

Zhou Q, Ma J, Dong S, Li X, Cui G. Intermolecular chemistry in solid polymer electrolytes for high-energy-density lithium batteries. Adv Mater. 2019;31(50):1902029. https://doi.org/10.1002/adma.201902029.CrossRef

[36]

Zhao X, Wang C, Liu H, Liang Y, Fan L-Z. A review of polymer-based solid-state electrolytes for lithium-metal batteries: structure, kinetic, interface stability, and application. Batter Supercaps. 2023;6(4):e202200502. https://doi.org/10.1002/batt.202200502.CrossRef

[37]

Shim J, Lee JS, Lee JH, Kim HJ, Lee J-C. Gel polymer electrolytes containing anion-trapping boron moieties for lithium-ion battery applications. ACS Appl Mater Interfaces. 2016;8(41):27740. https://doi.org/10.1021/acsami.6b09601.CrossRefPubMed

[38]

Meringolo C, Mastropietro TF, Poerio T, Fontananova E, De Filpo G, Curcio E, Di Profio G. Tailoring PVDF membranes surface topography and hydrophobicity by a sustainable two-steps phase separation process. ACS Sustain Chem Eng. 2018;6(8):10069. https://doi.org/10.1021/acssuschemeng.8b01407.CrossRef

[39]

Feng J, Wang L, Chen Y, Wang P, Zhang H, He X. PEO based polymer-ceramic hybrid solid electrolytes: a review. Nano Converg. 2021;8(1):2. https://doi.org/10.1186/s40580-020-00252-5.CrossRefPubMedPubMedCentral

[40]

Méricq J-P, Mendret J, Brosillon S, Faur C. High performance PVDF-TiO2 membranes for water treatment. Chem Eng Sci. 2015;123:283. https://doi.org/10.1016/j.ces.2014.10.047.CrossRef

[41]

Wu D, Deng L, Sun Y, Teh KS, Shi C, Tan Q, Zhao J, Sun D, Lin L. A high-safety PVDF/Al₂O₃ composite separator for Li-ion batteries via tip-induced electrospinning and dip-coating. RSC Adv. 2017;7(39):24410. https://doi.org/10.1039/C7RA02681A.CrossRefADS

[42]

Solarajan AK, Murugadoss V, Angaiah S. Dimensional stability and electrochemical behaviour of ZrO₂ incorporated electrospun PVdF-HFP based nanocomposite polymer membrane electrolyte for Li-ion capacitors. Sci Rep. 2017;7(1):45390. https://doi.org/10.1038/srep45390.CrossRefPubMedPubMedCentralADS

[43]

Liu L, Sun C. Flexible quasi-solid-state composite electrolyte membrane derived from a metal-organic framework for lithium-metal batteries. ChemElectroChem. 2020;7(3):707. https://doi.org/10.1002/celc.201902032.CrossRef

[44]

Xu F, Deng S, Guo Q, Zhou D, Yao X. Quasi-ionic liquid enabling single-phase poly(vinylidene fluoride)-based polymer electrolytes for solid-state LiNi_0.6Co_0.2Mn_0.2O₂|| Li batteries with rigid-flexible coupling interphase. Small Methods. 2021;5(7):2100262.CrossRef

[45]

Huang X, Zeng S, Liu J, He T, Sun L, Xu D, Yu X, Luo Y, Zhou W, Wu J. High-performance electrospun poly(vinylidene fluoride)/poly(propylene carbonate) gel polymer electrolyte for lithium-ion batteries. J Phys Chem C. 2015;119(50):27882. https://doi.org/10.1021/acs.jpcc.5b09130.CrossRef

[46]

Hsu C-Y, Liu R-J, Hsu C-H, Kuo P-L. High thermal and electrochemical stability of PVDF-graft-PAN copolymer hybrid PEO membrane for safety reinforced lithium-ion battery. RSC Adv. 2016;6(22):18082. https://doi.org/10.1039/C5RA26345J.CrossRefADS

[47]

Liu C, Hu J, Zhu Y, Yang Y, Li Y, Wu Q-H. Quasi-solid-state polymer electrolyte based on electrospun polyacrylonitrile/polysilsesquioxane composite nanofiber membrane for high-performance lithium batteries. Materials. 2022;15(21):7527. https://doi.org/10.3390/ma15217527.CrossRefPubMedPubMedCentralADS

[48]

Venkatesan S, Liu I-P, Lin J-C, Tsai M-H, Teng H, Lee Y-L. Highly efficient quasi-solid-state dye-sensitized solar cells using polyethylene oxide (PEO) and poly(methyl methacrylate) (PMMA)-based printable electrolytes. J Mater Chem A. 2018;6(21):10085. https://doi.org/10.1039/C8TA01729H.CrossRef

[49]

Zhong H, Wang C, Xu Z, Ding F, Liu X. A novel quasi-solid state electrolyte with highly effective polysulfide diffusion inhibition for lithium-sulfur batteries. Sci Rep. 2016;6(1):25484. https://doi.org/10.1038/srep25484.CrossRefPubMedPubMedCentralADS

[50]

Gao J, Yang Y, Zhang Z, Yan J, Lin Z, Guo X. Bifacial quasi-solid-state dye-sensitized solar cells with Poly (vinyl pyrrolidone)/polyaniline transparent counter electrode. Nano Energy. 2016;26:123. https://doi.org/10.1016/j.nanoen.2016.05.010.CrossRef

[51]

Tiantian Dong PM. How do polymer binders assist transition metal oxide cathodes to address the challenge of high-voltage lithium battery applications? Electrochem. Energy Rev. 2022;4(3):545. https://doi.org/10.1007/s41918-021-00102-w.CrossRef

[52]

Gao L, Li J, Ju J, Wang L, Yan J, Cheng B, Kang W, Deng N, Li Y. Designing of root-soil-like polyethylene oxide-based composite electrolyte for dendrite-free and long-cycling all-solid-state lithium metal batteries. Chem Eng J. 2020;389:124478. https://doi.org/10.1016/j.cej.2020.124478.CrossRef

[53]

Balart R, Montanes N, Dominici F, Boronat T, Torres-Giner S. Environmentally friendly polymers and polymer composites. Materials. 2020;13(21):4892. https://doi.org/10.3390/ma13214892.CrossRefPubMedPubMedCentralADS

[54]

Lv J, Zhang G, Zhang H, Zhao C, Yang F. Improvement of antifouling performances for modified PVDF ultrafiltration membrane with hydrophilic cellulose nanocrystal. Appl Surf Sci. 2018;440:1091. https://doi.org/10.1016/j.apsusc.2018.01.256.CrossRefADS

[55]

Zuo X, Ma X, Wu J, Deng X, Xiao X, Liu J, Nan J. Self-supporting ethyl cellulose/poly(vinylidene fluoride) blended gel polymer electrolyte for 5 V high-voltage lithium-ion batteries. Electrochim Acta. 2018;271:582. https://doi.org/10.1016/j.electacta.2018.03.195.CrossRef

[56]

Sun S, Huang Y, Sun R, Tu M. The strong association of condensed phenolic moieties in isolated lignins with their inhibition of enzymatic hydrolysis. Green Chem. 2016;18(15):4276. https://doi.org/10.1039/C6GC00685J.CrossRef

[57]

Pietruś W, Kafel R, Bojarski AJ, Kurczab R. Hydrogen bonds with fluorine in ligand-protein complexes-the PDB analysis and energy calculations. Molecules. 2022;27(3):1005. https://doi.org/10.3390/molecules27031005.CrossRefPubMedPubMedCentral

[58]

Mishra PK, Ekielski A. The self-assembly of lignin and its application in nanoparticle synthesis: a short review. Nanomaterials. 2019;9(2):243. https://doi.org/10.3390/nano9020243.CrossRefPubMedPubMedCentral

[59]

Qian H, Ren H, Zhang Y, He X, Li W, Wang J, Hu J, Yang H, Sari HMK, Chen Y, Li X. Surface doping vs. bulk doping of cathode materials for lithium-ion batteries: a review. Electrochem Energy Rev. 2022;5(4):2. https://doi.org/10.1007/s41918-022-00155-5.CrossRef

[60]

Vásquez-Garay F, Carrillo-Varela I, Vidal C, Reyes-Contreras P, Faccini M, Teixeira MR. A review on the lignin biopolymer and its integration in the elaboration of sustainable materials. Sustainability. 2021;13(5):2697. https://doi.org/10.3390/su13052697.CrossRef

[61]

Gao S, Sun F, Liu N, Yang H, Cao P–F. Ionic conductive polymers as artificial solid electrolyte interphase films in Li metal batteries – a review. Mater Today. 2020;40:140. https://doi.org/10.1016/j.mattod.2020.06.011.CrossRef

[62]

Wang F, Evans HA, Kim K, Yin L, Li Y, Tsai P-C, Liu J, Lapidus SH, Brown CM, Siegel DJ, Chiang Y-M. Dynamics of hydroxyl anions promotes lithium ion conduction in antiperovskite Li₂OHCl. Chem Mater. 2020;32(19):8481. https://doi.org/10.1021/acs.chemmater.0c02602.CrossRef

[63]

Wang X, Shen X, Zhang P, Zhou AJ, Zhao JB. Promoted Li⁺ conduction in PEO-based all-solid-state electrolyte by hydroxyl-modified glass fiber fillers. Rare Met. 2022;42(3):875. https://doi.org/10.1007/s12598-022-02218-4.CrossRef

[64]

Tribot A, Amer G, Abdou Alio M, de Baynast H, Delattre C, Pons A, Mathias J-D, Callois J-M, Vial C, Michaud P, Dussap C-G. Wood-lignin: Supply, extraction processes and use as bio-based material. Eur Polym J. 2019;112:228. https://doi.org/10.1016/j.eurpolymj.2019.01.007.CrossRef

[65]

Liu J, Yuan H, Tao X, Liang Y, Yang SJ, Huang J-Q, Yuan T-Q, Titirici M-M, Zhang Q. Recent progress on biomass-derived ecomaterials toward advanced rechargeable lithium batteries. EcoMat. 2020;2(1):e12019. https://doi.org/10.1002/eom2.12019.CrossRef

[66]

Cai X, Lei T, Sun D, Lin L. A critical analysis of the α, β and γ phases in poly(vinylidene fluoride) using FTIR. RSC Adv. 2017;7(25):15382. https://doi.org/10.1039/C7RA01267E.CrossRefADS

[67]

Benhabiles O, Galiano F, Marino T, Mahmoudi H, Lounici H, Figoli A. Preparation and characterization of TiO₂-PVDF/PMMA blend membranes using an alternative non-toxic solvent for UF/MF and photocatalytic application. Molecules. 2019;24(4):724. https://doi.org/10.3390/molecules24040724.CrossRefPubMedPubMedCentral

[68]

Gonultas O, Candan Z, Gonultas O, Candan Z. Chemical characterization and FTIR spectroscopy of thermally compressed eucalyptus wood panels. Maderas Cienc Tecnol. 2018;20(3):431. https://doi.org/10.4067/S0718-221X2018005031301.CrossRef

[69]

Cha E, Yun JH, Ponraj R, Kim DK. A mechanistic review of lithiophilic materials: resolving lithium dendrites and advancing lithium metal-based batteries. Mater Chem Front. 2021;5(17):6294. https://doi.org/10.1039/D1QM00579K.CrossRef

[70]

Liu Y, Zhu Y, Cui Y. Challenges and opportunities towards fast-charging battery materials. Nat Energy. 2019;4(7):540. https://doi.org/10.1038/s41560-019-0405-3.CrossRefADS

[71]

Liang FW, Xia YH, Zhang YL, Zhao SP, Yang SC, Liu XH. Lithium plating mechanism, model and fast charging strategy of lithium-ion batteries under fast charging condition. Chin J Rare Met. 2022;46(9):1235. https://doi.org/10.13373/j.cnki.cjrm.XY21030007.CrossRef

Title: Lignin-reinforced PVDF electrolyte for dendrite-free quasi-solid-state Li metal battery
Authors: Xin-Yang Chen
Xue-Jie Gao
Han-Yan Wu
Yu-Long Liu
Xiao-Fei Yang
Run-Cang Sun
Publication date: 02-01-2024
Publisher: Nonferrous Metals Society of China
Published in: Rare Metals / Issue 3/2024
Print ISSN: 1001-0521
Electronic ISSN: 1867-7185
DOI: https://doi.org/10.1007/s12598-023-02444-4

Springer Professional

Abstract

Graphical abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2024

Layered niobium carbide enabling excellent kinetics and cycling stability of Li-Mg-B-H hydrogen storage material

MOF-derived Cu embedded into N-doped mesoporous carbon as a robust support of PdAu nanocatalysts for ethanol electrooxidation

Recent advancements in hydrometallurgical recycling technologies of spent lithium-ion battery cathode materials

Ultra-high-rate Bi anode encapsulated in 3D lignin-derived carbon framework for sodium-ion hybrid capacitors

Charge regulation by ferromagnetic metal/LiF spin-polarized interface for high-performance Li metal anodes

Enhanced hydrogen evolution reaction in FePt film with remanence due to decrease in domain walls

Premium Partners