Issue 11/2018
Content (60 Articles)
Orientation-Dependent Tensile Behavior of Nanolaminated Graphene-Al Composites: An In Situ Study
Xidan Fu, Zan Li, Qiang Guo, Genlian Fan, Zhiqiang Li, Ding-Bang Xiong, Zhanqiu Tan, Yishi Su, Shmuel Osovski, Di Zhang
Impulse Excitation Internal Friction Study of Retained Austenite in Ferrous Martensite
Ji Hoon Kim, Yu Na Ju, Singon Kang, Bruno C. De Cooman
Martensite Formation from Reverted Austenite at Sub-zero Celsius Temperature
F. Niessen, M. Villa, M. A. J. Somers
Importance of Non-uniform Boundary Migration for Recrystallization Kinetics
Fengxiang Lin, Yubin Zhang, Wolfgang Pantleon, Dorte Juul Jensen
Characterization of the Martensitic Transformation in NiPtAl Alloy Using Digital Holographic Imaging
Benjamin P. Thiesing, Sebastien Dryepondt, Donovan Leonard, Ralph B. Dinwiddie, Christopher J. Mann
The Influence of Rare Earth Elements on Phase Transformation in 25Mn Steel During Continuous Heating
Honghong Yan, Yong Hu, Dawen Zhao
Carbon Clustering in Low-Temperature Bainite
Rosalia Rementeria, Carlos Capdevila, Ricardo Domínguez-Reyes, Jonathan D. Poplawsky, Wei Guo, Esteban Urones-Garrote, Carlos Garcia-Mateo, Francisca G. Caballero
The Friction Stress of the Hall–Petch Relationship of Pure Mg and Solid Solutions of Al, Zn, and Gd
D. Nagarajan, C. H. Cáceres
Improvement of Creep Resistance at 950 °C and 400 MPa in Ru-Containing Single-Crystal Superalloys with a High Level of Co Addition
J. J. Huo, Q. Y. Shi, S. Tin, L. F. Li, Q. Feng
Microstructural Degradation and the Effects on Creep Properties of a Hot Corrosion-Resistant Single-Crystal Ni-Based Superalloy During Long-Term Thermal Exposure
X. W. Jiang, D. Wang, Di Wang, X. G. Liu, W. Zheng, Y. Wang, G. Xie, L. H. Lou
Microstructural and Finite Element Analysis of Creep Failure in Dissimilar Weldment Between 9Cr and 2.25Cr Heat-Resistant Steels
Hyun Je Sung, Ji Hyun Moon, Min Ji Jang, Hyoung Seop Kim, Sung-Joon Kim
Strength and Ductility with Dual Grain-Size and Texture Gradients in AZ31 Mg Alloy
Jiawei Yan, Jiawei Ma, Jian Wang, Yao Shen
Mechanical and Microstructural Characterization of AF955 (UNS N09955) Nickel-Based Superalloy After Different Heat Treatments
Andrea Serafini, Giuliano Angella, Carlo Malara, Maria Francesca Brunella
The Role of Hydrogen on the Local Fracture Toughness Properties of 7XXX Aluminum Alloys
Md. Shahnewaz Bhuiyan, Hiroyuki Toda, Kazuyuki Shimizu, Hang Su, Kentaro Uesugi, Akihisa Takeuchi, Yoshio Watanabe
Understanding the High Strength and Good Ductility in LPSO-Containing Mg Alloy Using Synchrotron X-ray Diffraction
Jie Wang, Leyun Wang, Gaoming Zhu, Bijin Zhou, Tao Ying, Xingmin Zhang, Qi Huang, Yao Shen, Xiaoqin Zeng, Haiyan Jiang
Investigation of Microstructure and Mechanical Properties of Fe-V Dissimilar Welds
Qiaoling Chu, Min Zhang, Jihong Li, Ning Hu, Cheng Yan
Effect of Au Addition on the Microstructure and Properties of Ag-4Pd Bonding Wires
Bing-Hau Kuo, Du-Cheng Tsai, Yen-Lin Huang, Po-Chun Hsu, Tung-Han Chuang, Hsing-Hua Tsai, Fuh-Sheng Shieu
Shear Strength of Reactive Resistance Welded Ti6Al4V Parts with the Use of Ni(V)/Al Multilayers
Łukasz Maj, Jerzy Morgiel, Krzysztof Mars, Anna Tarasek, Elżbieta Godlewska
A Comparison of the Inertia Friction Welding Behavior of Similar and Dissimilar Ni-Based Superalloys
O. N. Senkov, D. W. Mahaffey, S. L. Semiatin
Effect of Nb Addition on Dendrite Growth and Equiaxed Grain Ratio of Fe-20 Pct Cr High-Purity Ferritic Stainless Steel
Yuyang Hou, Shijian Li, Guoguang Cheng
Experiments and LBM Simulations of Grain Refining in Al-Zn Alloys by Solid–Liquid Mixing
Shu-Guo Zhang, Hong-Min Guo, Dong-Sheng Xie, Xiang-Jie Yang
Influence of Casting Parameters on Hooks and Entrapped Inclusions at the Subsurface of Continuous Casting Slabs
Xubin Zhang, Ying Ren, Lifeng Zhang
Containerless Solidification Processing and Phase-Field Simulation for Ternary Fe-Cu-Co Peritectic Alloy Under Reduced-Gravity Conditions
F. P. Dai, Y. H. Wu, W. L. Wang, B. Wei
Density Measurement and Atomic Structure Simulation of Metastable Liquid Ti-Ni Alloys
P. F. Zou, H. P. Wang, S. J. Yang, L. Hu, B. Wei
Microstructural Characterization and Mechanical Properties of TIG-Welded API 5L X60 HSLA Steel and AISI 310S Stainless Steel Dissimilar Joints
A. H. Saedi, E. Hajjari, S. Mohsen Sadrossadat
Solidification Microsegregation and Hot Ductility of Fe-Mn-C-Al-xNb TWIP Steels
Min Hyeok Kwon, Jin-Kyung Kim, Jian Bian, Hardy Mohrbacher, Taejin Song, Sung Kyu Kim, Bruno C. De Cooman
Study of the Heat Transfer Behavior and Naturally Deposited Films in Strip Casting by Using Droplet Solidification Technique
Wanlin Wang, Chenyang Zhu, Cheng Lu, Jie Yu, Lejun Zhou
Nanopowder Effect on Fe Nano/Micro-Bimodal Powder Injection Molding
Joo Won Oh, Won Sik Lee, Seong Jin Park
Selective Oxidation of a C-2Mn-1.3Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing Heat Treatments
G. Seyed Mousavi, J. R. McDermid
Effect of Process Atmosphere Dew Point and Tin Addition on Oxide Morphology and Growth for a Medium-Mn Third Generation Advanced Steel During Intercritical Annealing
Maedeh Pourmajidian, Brian Langelier, Joseph R. McDermid
A Novel Composition Design Method for Beta-Gamma TiAl Alloys with Excellent Hot Workability
Fantao Kong, Ning Cui, Yuyong Chen, Xiaopeng Wang
On the Supplementation of Magnesium and Usage of Ultrasound Stirring for Fabricating In Situ TiB2/A356 Composites with Improved Mechanical Properties
Zhiwei Liu, Zhiwu Dong, Xiaole Cheng, Qiaoling Zheng, Jingrui Zhao, Qingyou Han
Effective Activation Energy for the Solid-State Sintering of Silicon Carbide Ceramics
Dulal Chandra Jana, G. Sundararajan, K. Chattopadhyay
Synthesis and Air Jet Erosion Study of AlXFe1.5CrMnNi0.5 (x = 0.3, 0.5) High-Entropy Alloys
Saurav Kumar, Devesh Kumar, Ornov Maulik, Ajaya Kumar Pradhan, Vinod Kumar, Amar Patniak
Thermal Stress Analysis of Residual Stress in a Cylindrical Aluminum Casting with Cast-in GCI Liner, Taking Recovery Behavior Effect into Account
Yuichi Motoyama, Naoyuki Ebihara, Hidetoshi Shiga, Takeshi Sato, Hiroshi Kambe, Makoto Yoshida
Effect of Aluminum on Borocarbides and Temper Softening Resistance of High-Boron High-Speed Steel
Xiangyi Ren, Hanguang Fu, Jiandong Xing, Shuli Tang
Investigation of the Structure and Properties of the Fe-Ni-Co-Cu-V Multiprincipal Element Alloys
A. I. Bazlov, A. Yu. Churyumov, D. V. Louzguine-Luzgin
Effects of Alloying Elements on Thermal Expansion Behavior of Ni-Fe-Cr-Based Superalloys
Yunsheng Wu, Xuezhi Qin, Lanzhang Zhou
Effect of the Mass Fraction of Ceramic Particles on the Porosity of Wear-Resistant Composites Fabricated by Combustion Synthesis
Guilin Sun, Dingdong Fan, Sufen Tao
Microstructure and Mechanical Properties of In Situ TiB/TiC Particle-Reinforced Ti-5Al-5Mo-5V-3Cr Composites Synthesized by Spark Plasma Sintering
Steffen Grützner, Lutz Krüger, Christian Schimpf, Markus Radajewski, Ines Schneider
Nanoparticles Reinforcement for the Improved Strength and High-Temperature Wear Resistance of Mn-Cr Steel
A. Kračun, D. Jenko, M. Godec, S. V. Savilov, G. Prieto, W. Tuckart, B. Podgornik
Surface Properties and Erosion–Corrosion Behavior of Nanostructured Pure Titanium in Simulated Body Fluid
Osama M. Irfan, Fahad A. Al-Mufadi, F. Djavanroodi
Phase-Field Modeling of Equilibrium Precipitate Shapes Under the Influence of Coherency Stresses
Bhalchandra Bhadak, R. Sankarasubramanian, Abhik Choudhury
Microstructure and Property-Based Statistically Equivalent Representative Volume Elements for Polycrystalline Ni-Based Superalloys Containing Annealing Twins
Akbar Bagri, George Weber, Jean-Charles Stinville, William Lenthe, Tresa Pollock, Christopher Woodward, Somnath Ghosh
Optimization of Crystallographic Texture for Sheet-forming Applications Using Taylor-based Models
Jesús Galán-López, Leo A. I. Kestens
Effect of Stress Relieving Heat Treatment on the Microstructure and High-Temperature Compressive Deformation Behavior of Ti-6Al-4V Alloy Manufactured by Selective Laser Melting
Young-Kyun Kim, Soon-Hong Park, Yong-Jin Kim, Bandar Almangour, Kee-Ahn Lee
Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations
S. J. Foster, K. Carver, R. B. Dinwiddie, F. List III, K. A. Unocic, A. Chaudhary, S. S. Babu
Effect of Metastable Mg2Si and Dislocations on α-Al(MnFe)Si Dispersoid Formation in Al-Mn-Mg 3xxx Alloys
Zhen Li, Zhan Zhang, X.-Grant Chen
Quantification of Entrainment Damage in A356 Aluminum Alloy Castings
Murat Tiryakioğlu, Pedram Yousefian, Paul D. Eason
Wetting Behaviors and Interfacial Characteristics of Sn0.3Ag0.7Cu Alloys Containing Ti or Cr on Graphite
Wei Fu, Shengpeng Hu, Xiaoguo Song, Yixuan Zhao, Hong Bian, Cheng Jin
A Comparative Study on the Effects of Different Thermochemical Coating Techniques on Corrosion Resistance of STKM-13A Steel
Alİ Günen, Yusuf Kanca, İsmaİl Hakkı Karahan, Mustafa Serdar Karakaş, Mustafa Sabrİ Gök, Erdoğan Kanca, Ahmet Çürük
Effects of Different Graphite Types on the Thermal Fatigue Behavior of Bionic Laser-Processed Gray Cast Iron
Haiqiu Lu, Ming Liu, Dahui Yu, Ti Zhou, Hong Zhou, Peng Zhang, Haifeng Bo, Wei Su, Zhihui Zhang, Heng Bao
Porosity Reduction in New Thin Films of Ceramic Coatings on Stainless Steel by Annealing at Reduced Pressure
G. I. Cubillos, M. Bethencourt, J. E. Alfonso, E. Rodríguez-Castellón, E. Romero
Effect of Copper Addition on the Cluster Formation Behavior of Al-Mg-Si, Al-Zn-Mg, and Al-Mg-Ge in the Natural Aging
Daichi Hatakeyama, Katsuhiko Nishimura, Kenji Matsuda, Takahiro Namiki, Seungwon Lee, Norio Nunomura, Tetsuo Aida, Teiichiro Matsuzaki, Randi Holmestad, Sigurd Wenner, Calin D. Marioara
Preparation, Characterization, and Corrosion Behavior of Calcium Phosphate Coating Electrodeposited on the Modified Nanoporous Surface of NiTi Alloy for Biomedical Applications
Seyed Omid Reza Sheykholeslami, Jafar Khalil-Allafi, Leila Fathyunes
In Vitro Biodegradation and Mechanical Properties of Mg-Zn Alloy and Mg-Zn-Hydroxyapatite Composite Produced by Mechanical Alloying for Potential Application in Bone Repair
Emee Marina Salleh, Hussain Zuhailawati, Siti Noor Fazliah Mohd Noor, Norinsan Kamil Othman
Correction to: Influence of the Strain History on TWIP Steel Deformation Mechanisms in the Deep-Drawing Process
R. Lapovok, I. Timokhina, K. Mester, M. Weiss, A. Shekhter