Issue 5/2001
Content (22 Articles)
Inclusions in commercial low and medium carbon ferromanganese
Thobias Sjöqvist, Pär Jönsson, Öystein Grong
Influence of zirconium and copper on the early stages of aging in Al-Zn-Mg alloys
X. J. Jiang, B. Noble, V. Hansen, J. Tafto
Discontinuous precipitation at [001] twist boundaries in Cu-0.75 wt pct Be alloy bicrystals
R. Monzen, K. Kita, H. Shigehara
Mechanism of detrimental effects of carbon content on cleavage fracture toughness of low-alloy steel
J. H. Chen, G. Z. Wang, S. H. Hu
The evolution of grain boundary character during superplastic deformation of an Al-6 pct Cu-0.4 pct Zr alloy
M. Eddahbi, O. A. Ruano, T. R. McNelley
Creep-rupture behavior of a directionally solidified nickel-base superalloy
J. T. Guo, C. Yuan, H. C. Yang, V. Lupinc, M. Maldini
Correlation of microstructure and surface roughness of disc drums fabricated by hot forging of an AISI 430F stainless steel
Dong-Kuk Kim, Dong-Geon Lee, Sunghak Lee
Tensile ductility of several commercial aluminum alloys at elevated temperatures
Eric M. Taleff, Peter J. Nevland, Paul E. Krajewski
An experimental investigation of fretting fatigue in Ti-6Al-4V: the role of contact conditions and microstructure
T. A. Venkatesh, B. P. Conner, S. Suresh, A. E. Giannakopoulos, T. C. Lindley, C. S. Lee
Dependency of fracture toughness on the inhomogeneity of coarse TiN particle distribution in a low alloy steel
L. P. Zhang, C. L. Davis, M. Strangwood
Spatially resolved X-ray diffraction mapping of phase transformations in the heat-affected zone of carbon-manganese steel arc welds
John W. Elmer, Joe Wong, Thorsten Ressler
A process model for friction stir welding of age hardening aluminum alloys
Ø. Frigaard, Ø. Grong, O. T. Midling
Microstructural size effects in high-strength high-conductivity Cu-Cr-Nb alloys
Ken R. Anderson, Joanna R. Groza
Ti5Si3 whisker in-situ reinforced TiAl alloys
Fu-Sheng Sun, Chun-Xiao Cao, Ming-Ao Yan, Seung-Eon Kim, Yong-Tai Lee
Communications
On strengthening mechanisms in commercial Nb-Ti hot strip steels
S. S. Campos, H. -J. Kestenbach, E. V. Morales
Communications
Particle formation in the rapidly solidified zone of alloy 600 surface melted by a CO2 laser beam
Yun Soo Lim, Joung Soo Kim, Hyuk Sang Kwon
Communications
Effect of growth velocity on the growth temperature of the Al-AlxFe eutectic in Al-2.85Fe-0.12V alloy
Y. Wang, H. Jones