Issue 6/2001
Content (30 Articles)
Influence of pearlite morphology and heating rate on the kinetics of continuously heated austenite formation in a eutectoid steel
F. G. Caballero, C. Capdevila, C. García de Andrés
Metastable phases in an Al-Mg-Si alloy containing copper
Kenji Matsuda, Susumu Ikeno, Yasuhiro Uetani, Tatsuo Sato
Stress corrosion cracking relation with dezincification layer-induced stress
Xianzhong Guo, Kewei Gao, Lijie Qiao, Wuyang Chu
Optimization of mechanical properties of high-carbon pearlitic steels with Si and V additions
K. Han, D. V. Edmonds, G. D. W. Smith
Mechanical properties of Ir-Nb alloys containing Ni and Al
X. H. Yu, Y. Yamabe-Mitarai, S. Nakazawa, Y. Ro, H. Harada
The modified quasi-chemical model: Part II. Multicomponent solutions
Arthur D. Pelton, Patrice Chartrand
Thermodynamic evaluation and optimization of the LiCl-NaCl-KCl-RbCl-CsCl-MgCl2-CaCl2 system using the modified quasi-chemical model
Arthur D. Pelton, Patrice Chartrand
Thermodynamic evaluation and optimization of the LiF-NaF-KF-MgF2-CaF2 system using the modified quasi-chemical model
Patrice Chartrand, Arthur D. Pelton
The modified quasi-chemical model: Part IV. Two-sublattice quadruplet approximation
Arthur D. Pelton, Patrice Chartrand, Gunnar Eriksson
Thermodynamic evaluation and optimization of the Li, Na, K, Mg, Ca//F, Cl reciprocal system using the modified quasi-chemical model
Patrice Chartrand, Arthur D. Pelton
The effect of the surface on grain boundary migration in austenitic stainless steel weld metal
S. Shibata, T. Watanabe
Residual stresses and interface strengths in MoSi2/stainless steel 316L joints produced by metallic-glass brazing
Rajendra U. Vaidya, Partha Rangaswamy, Amit Misra, Marc Verdier
The effect of grit blasting on the oxidation behavior of a platinum-modified nickel-aluminide coating
V. K. Tolpygo, D. R. Clarke, K. S. Murphy
Numerical simulation of deformation-induced segregation in continuous casting of steel
T. Kajatani, J. -M. Drezet, M. Rappaz
Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air
David J. Harach, Kenneth S. Vecchio
Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling
P. J. Hurley, B. C. Muddle, P. D. Hodgson
MnS precipitation in association with manganese silicate inclusions in Si/Mn deoxidized steel
Han S. Kim, Hae-Geon Lee, Kyung-Shik Oh
Stabilization mechanisms of retained austenite in transformation-induced plasticity steel
Jiajun Wang, Sybrand Van Der Zwaag
Methodology to design the interfaces in SiC/Al composites
Jae-Chul Lee, Ho-In Lee, Jae-Pyoung Ahn, Jae-Hyeok Shim, Zhongliang Shi
In-situ characterization of γ/γ′ lattice stability in a nickel-base superalloy by neutron diffraction
D. -Q. Wang, S. S. Babu, E. A. Payzant, P. G. Radaelli
Hydride formation and its effects on mechanical properties of Ti-5111
Z. F. Wang, N. Chollocoop, C. L. Briant, K. S. Kumar
Strain-path effects during hot working of Ti-6Al-4V with a colony-alpha microstructure
S. L. Semiatin, J. O. Brown, T. M. Brown, D. P. DeLo, T. R. Bieler, J. H. Beynon
A new route to bulk nanostructured metals
Yuntian T. Zhu, Honggang Jiang, Jianyu Huang, Terry C. Lowe