Issue 5-6/2011
Content (25 Articles)
Growth prospects for cold-rolled products in the international and Russian markets
O. V. Fedonin, S. Ya. Unru, M. V. Nemkin, D. N. Danilenko, E. L. Kandaurov
Optimization of a system for the radiation monitoring of incoming scrap metal
N. P. Valuev, O. V. Lysova, N. V. Nikonenkov
Improving the technology used to blend sintering-machine charge materials at the Chelyabinsk Metallurgical Combine
V. N. Artyushov, A. G. Ptichnikov, V. A. Andreev, N. P. Myagchenkova, V. I. Danilov, E. Yu. Skorik
Analytical study of blast-furnace smelting operations performed with different blast temperatures and oxygen contents
I. G. Tovarovskii, A. E. Merkulov
Technology for automatically determining the heat content of a steel-pouring ladle*
S. V. Ageev, A. D. Chernopolskii, I. A. Petushkov, V. I. Boikov, S. V. Bystrov, A. A. Blinnikov
Method and device for melt low-frequency treatment
I. E. Ignatiev, Yu. V. Kontsevoi, E. A. Pastukhov, E. V. Ignatieva
Intense macroshear as an unusual means of providing high quality rolled sheet*
A. I. Traino, V. P. Polukhin, V. A. Nikolaev
Improving the quality control system for hot- and cold-rolled products at the Magnitogorsk Metallurgical Combine
V. V. Kurban, V. M. Salganik, A. M. Pesin, D. S. Fedorov
Domestic materials and technology for anticorrosion protection of pickling departments of pipe rolling and metallurgical enterprises
K. Yu. Zershchikov, Yu. V. Semenov, M. A. Vaniev
Mathematical modeling of the roasting of lime-nepheline and cement charges in rotary kilns
Yu. V. Sharikov, O. V. Titov
Innovative technology for recycling the negative segments of alkaline batteries using recoverable solvent
A. R. Barashev, S. V. Karelov, O. S. Anisimova, S. V. Mamyachenkov
Study of manganese dioxide dissolution kinetics with the aim of rational use of exhausted chemical current sources
E. B. Godunov, I. V. Artamonova, I. G. Gorichev
Construction of a mathematical model of roasting based on the ReactOp software package
Yu. V. Sharikov, O. V. Titov
Enrichment and crystallization of vanadium in factory steel slag
Xingrong Wu, Liaosha Li, Yuanchi Dong
Nitrogen in austenitic stainless steels of different alloying systems
V. V. Naumenko, A. P. Shlyamnev, G. A. Filippov
Use of electric-arc metallization to recondition the working surfaces of the narrow walls of thick-walled slab molds
A. G. Radyuk, S. M. Gorbatyuk, A. A. Gerasimova
Structure and properties of the heat-affected zone of steel strength class Kh80 pipes with different linear welding energy
A. Yu. Ivanov, R. V. Sulyagin, G. D. Motovilina, E. I. Khlusova
Formation of nonaxial segregation in a forging ingot cast in an ingot mold with a bottom part of modified shape
N. A. Zyuban, D. V. Rutskii, S. B. Gamanyuk, S. S. Konovalov
Preparation of precipitation-strengthened hollow billets for rotary dispersers
I. V. Chumanov, V. I. Chumanov, A. N. Anikeev
Laws governing the dynamic fracture of two-layer bimetallic composites
P. O. Maruschak, R. T. Bishchak, T. Vuherer
Features of dust formation in the oxygen-blowing of melts and possible uses of captured dust
L. M. Simonyan, N. M. Govorova
Ensuring the cost-effectiveness of recultivating slag dumps at metallurgical combines
A. V. Kaplan, T. V. Davydova, O. A. Gribkov
Controlling the anode effect in an aluminum reduction cell
V. Yu. Bazhin, A. A. Vlasov, A. V. Lupenkov