Microstructure and dielectric properties of Ca_1–3/2xBi_xCu₃Ti₄O₁₂ (x = 0, 0.05, 0.10, 0.15 and 0.20) ceramics

Influence of bismuth substitution on calcium site in CaCu₃Ti₄O₁₂ has been investigated. Compositions of Ca_1-3/2xBi_xCu₃Ti₄O₁₂ (x = 0, 0.05, 0.10, 0.15 and 0.20) were fabricated by solid-state sintering method. Crystal structure is remained cubic. X-ray diffraction indicates the presence of secondary phase of CuO in CCTO ceramics. Bismuth doping restrains the formation of CuO phase apparently. The grain size of CaCu₃Ti₄O₁₂ ceramics was greatly decreased by Bi³⁺ doping, resulting from the ability of bismuth to inhibit the grain growth. The dielectric and electric properties of CCTO ceramics were found to be influenced by bismuth doping. The fitting results of the complex impedance spectra showed an increase of the resistance of grain and grain boundary by bismuth substitution. Ca_0.70Bi_0.20Cu₃Ti₄O₁₂ showed the highest dielectric constant in the low frequency range. A modest composition such as Ca_0.85Bi_0.10Cu₃Ti₄O₁₂ expressed the optimized dielectric properties of higher dielectric constant (1.3 × 10⁴) and lower dielectric loss (0.06) than pure CCTO. The low and high temperature dielectric loss spectra demonstrate the interfacial polarization of the initial and secondary oxygen ionization, relating with the grain and grain boundary (the electrode contact for Ca_0.70Bi_0.20Cu₃Ti₄O₁₂) respectively.