Top

Metallurgist

Published in:

14-11-2019

Mold Oscillating System with Optimized Non-Sinusoidal Oscillation Profile

Authors: Chao Zhou, Xingzhong Zhang, Fang Wang, Yiming Fang

Published in: Metallurgist | Issue 5-6/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A mold oscillating system for continuous casting machines has been developed based on a nonsinusoidal oscillation profile with an online oscillation control capability. A new type of the mold oscillating system is proposed comprising two servomotor-driven eccentric shafts. The principle of operation of a non-sinusoidal oscillation system is described. Based on the analysis of the non-sinusoidal oscillation waveform expressed as a piecewise linear function, the angular speed of a servomotor necessary to realize such oscillations was determined. A procedure for calculating process parameters was developed. The model of synchronized control of the casting speed and oscillation frequency was optimized and process parameters were calculated for the deviation factor of 20% and amplitude equal to 4 mm. The mold oscillating systems of sinusoidal and non-sinusoidal type were compared. The advantages of the non-sinusoidal type of oscillating system were shown, which include a decrease in depth of the oscillation marks on the surface of continuous-cast billet, an improvement in the mold-ingot lubrication conditions, and higher quality of continuous-cast billets.

previous article Study of Grinding Ball Quality Properties During Manufacture in a Screw Rolling Mill

next article Correlation of 12% Chromium Ferritic-Martensitic Steel Heat Resistance with Supercooled Austenite Stability Indices

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

X. Z. Zhang, Q. G. Liu, W. Huang, et al., “Investigation of non-sinusoidal oscillation waveform function and technological parameters for continuous casting mold,” Iron and Steel., 49, No. 8, 42–46 (2014).

X. Z. Zhang, Y. M. Fang and H. Y. Wang, “New type waveform function construction of non-sinusoidal oscillation for continuous casting mold,” Chin. Mech. Eng., 24, No. 24, 3375–3379 (2013).

A. Yu. Tsuprun, A. V. Fedosov, V. V. Kislitsa, et al., “Study of the effect of the characteristic of harmonic mold oscillation regimes on the surface quality of continuous cast ingot,” Metallurg., 7, 40–44 (2012).

Y. M. Fang, G. Y. Li, J. X. Li, et al., “Modeling and analyzing for oscillating system of continuous casting mold driven by servo motor,” Chin. J. Sci. Instr., 35, No. 11, 2615–2623 (2014).

C. Q. Li, L. J. Sun, Q. H. Yuan, et al., Hydraulic Oscillator of Slab Mold, Pat. 200810048798.1, China (2008).

Y. Ma, X. D. Wang, X. Y. Zang, et al., “Research of oscillation of hydraulic oscillator for slab continuous caster,” Iron and Steel, 42, No. 7, 34–37 (2007).

Z. H. Tian, L. Tian, Y. H. Zhou, et al., “Development and application of non-sinusoidal oscillation system,” Iron and Steel, 39, No. S, 623–629 (2004).

X. Z. Zhang, X. K. Li, X. R. Zheng, et al., “Study of non-sinusoidal oscillation of mold driven by ellipse gears,” Chin. J. Mech. Eng., 40, No. 11, 178–181 (2004).CrossRef

X. Z. Zhang, X. R. Zheng, Q. G. Liu, et al., “Investigation and application of non-sinusoidal oscillation technique of mold,” J. Iron Steel Res. Int., 20, No. 12, 19–24 (2013).CrossRef

10.

H. P. Yang, X. K. Li, X. Z. Zhang, et al., “Harmonic resonance in non-sinusoidal oscillation of mold,” Chin. J. Mech. Eng., 43, No. 7, 207–212 (2007).CrossRef

11.

X. K. Li, H. P. Yang, and L. D. Yang, “Low-frequency resonance of mold driven by oval gears,” Chin. J. Mech. Eng., 44, No. 5, 231–237 (2008).CrossRef

12.

L. P. Zhang, X. K. Li, H. P. Yang, et al., “Non-sinusoidal wave and process parameters of anti-parallel four-barlinkage,” Chin. J. Mech. Eng., 45, No. 5, 301–306 (2009).CrossRef

13.

L. P. Zhang, X. K. Li, Y. F. Yao, et al., “Study on cascaded whole-leaf spring oscillation mechanism for mold in continuous casting,” Ironmak. Steelmak., 37, 205–210 (2010).CrossRef

14.

L. P. Zhang, J. X. Wang, Y. D. Wu, et al., “Dynamic characteristics analysis on the periodical time-varying parameter system for the mold,” J. Mach Des., 28, No. 11, 49–54 (2011).

15.

L. P. Zhang, J. X. Wang, Q. H. Lu, et al., “Research on the elastic vibration response of new non-sinusoidal oscillation system for the mold,” Chin. J. Mech. Eng., 47, No. 19, 91–96 (2011).CrossRef

16.

X. Z. Zhang, C. Zhou, P. F. Liu, et al., “Investigation of waveform and technological parameters for non-sinusoidal oscillation of mold driven by double eccentric shafts,” Chin. Mech. Eng., 27, No. 23, 3125–3129 (2016).

17.

X. Z. Zhang, H. T. Zhu, A. K. Tieu, et al., “An investigation of mechanical non-sinusoidal oscillation of continuous casting mold,” Adv. Mater Res., 264–265, 337–342 (2011).CrossRef

18.

X. Z. Zhang and X. K. Li, “Study of non-sinusoidal oscillation of mold driven by double eccentric shaft,” Heavy Mach., 4, 20–22 (2005).

19.

C. Zhou, X. Z. Zhang, F. Wang, et al., “Mechanism analysis of non-sinusoidal oscillation of continuous casting mold synchronously driven by double servomotors,” J Iron Steel Res. Int., 24, No. 12, 251–257 (2017).CrossRef

20.

K. Feng and Z. W. Han, “Optimization design on synchronization control model of hydraulic slab mold oscillation,” Foundry Technol., 30, No. 10, 1326–1329 (2009).

21.

X. K. Li and D. M. Zhang, “Technology of the mold oscillation in continuous casting,” Metallurgical Industry Press, China, Beijing (2000).

22.

X. K. Li, X. M. Wu, Y. M. Fang, et al., “Method to construct waviness function of mold non-sinusoidal oscillation,” Chin. J. Mech. Eng., 36, No. 1, 67–70 (2000).CrossRef

Title: Mold Oscillating System with Optimized Non-Sinusoidal Oscillation Profile
Authors: Chao Zhou
Xingzhong Zhang
Fang Wang
Yiming Fang
Publication date: 14-11-2019
Publisher: Springer US
Published in: Metallurgist / Issue 5-6/2019
Print ISSN: 0026-0894
Electronic ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-019-00864-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2019

Development of a Method for the Visualization of the Process of Forming of Curved Profiles in the Software Used for the Numerical Analyses of the Roll Passes

Influence of Atomic and Molecular Hydrogen in Silumins Melts on Their Mechanical Properties

Mastering of the Technology of Assembling of Composite Mill Rolls Under the Conditions of Rail and Structural Steel Shop at the JSC “EVRAZ ZSMK”

Mastering of New Rebar Profiles and Roll Materials in the Rolling Production of the EVRAZ ZSMK

Study of the Effect of Composition and Thermal Deformation Treatment on Properties of Ferritic Steels Microalloyed with Titanium and Niobium. Part 2. Phase Precipitate Characteristics*

Development of Advanced Calibrations for Point and Wing Rails in a Universal Rail and Structural Steel Mill

Premium Partners