Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Manifestations of Nanomaterials in Development of Advanced Sensors for Defense Applications Read chapter Read first chapter

2020 | OriginalPaper | Chapter

36. Multifunctional Sol-Gel Nanocomposite Coatings for Aerospace, Energy, and Strategic Applications: Challenges and Perspectives

Authors : R. Subasri, K. R. C. Soma Raju

Published in: Handbook of Advanced Ceramics and Composites

Publisher: Springer International Publishing

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Sol-gel technique is a wet chemical synthesis procedure involving the hydrolysis of either a fully hydrolyzable metal/silicon alkoxide or an organically modified silane followed by condensation and polymerization reactions. Through this method, ceramics, glasses, and hybrid nanocomposite materials of high purity and homogeneity can be produced than when obtained through conventional processes that involve high-temperature treatment conditions. Sol-gel-derived hybrid nanocomposite coatings combine the interesting properties such as flexibility, hardness, etc. drawn from an organic polymer and an inorganic glass and hence are of great interest for aerospace, energy, and defense applications, due to their distinct advantages. Varied functionalities like corrosion protection, antireflection, scratch resistance, antibacterial, water/oil repellant, erosion resistant, and antistatic are possible to be obtained using this technique. Sol-gel nanocomposite films on appropriate substrates are also capable of being used as sensors for detecting chemical/biological warfare agents as well as for sensing ionizing radiation in the environment. Despite many advantages of this technique, there are still certain challenges that need to be circumvented in order to fully harness the potential of the coatings derived from this process. This chapter mainly focuses on the potential applications of sol-gel nanocomposite coatings for aerospace, energy, and strategic sectors, where challenges in using them for applications and future perspectives on how they can be mitigated are discussed.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
previous chapter New-Generation Ceramic Coatings for High-Temperature Applications by Liquid Feedstock Plasma Spraying
next chapter Materials Aspects of Thermal Barrier Coatings
Literature
1.
Brinker CJ, Scherer GW (1990) Sol-Gel science: the physics and chemistry of Sol-Gel processing. Academic, San Diego
2.
Zheludkevich ML, Salvado IM, Ferreira SMG (2005) Sol-gel coatings for corrosion protection of metals. J Mater Chem 15:5099–5111CrossRef
3.
Romero PG, Sanchez C (2004) Functional hybrid materials. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
4.
Kickelbick G (2007) Hybrid materials: synthesis, characterization and applications. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
5.
Boyer R (2006) Aircraft materials. In: Mortensen A (ed) Concise encyclopedia of composite materials, 2nd edn. Elsevier Science, Amsterdam
6.
Ghali E (2000) Aluminium and aluminium alloys. In: Revie RW (ed) Uhlig’s corrosion handbook, 2nd edn. The Electrochemical Society Inc. & John Wiley and Sons Inc, New York, pp 677–715
7.
Markley TA, Mardel JI, Hughes AE, Hinton BRW, Glenn AM, Forsyth M (2011) Chromate replacement in coatings for corrosion protection of aerospace aluminium alloys. Mater Corros 62(9):836CrossRef
8.
Subasri R (2015) Improving corrosion resistance of metals/alloys using hybrid nanocomposite coatings synthesized through sol-gel processing. In: Aliofkhazraei M (ed) Comprehensive guide for nanocoatings technology, volume 3: properties and development. Nova Science Publishers Inc, New York, pp 123–142
9.
Kulinich SA, Akhtar AS (2012) On conversion coating treatments to replace chromating for Al alloy: recent developments and possible future directions. Russ J Non-Ferrous Met 53:176–203CrossRef
10.
Droniou P, Fristad WE, Liang JL (2005) Nanoceramic-based conversion coating: ecological and economic benefits position process as a viable alternative to phosphating systems. Met Finish 103:41–43CrossRef
11.
Wang D, Bierwagen GP (2008) Review: sol-gel coatings on metals for corrosion protection. Prog Org Coat 64:327–338CrossRef
12.
Shchukin DG, Zheludkevich ML, Yasakau K, Lamaka S, Ferreira MGS, Mohwald H (2006) Layer-by-layer assembled nanocontainers for self-healing corrosion protection. Adv Mater 18:1672–1678CrossRef
13.
Zhang D, Wang L, Qian H, Li X (2016) Superhydrophobic surfaces for corrosion protection: a review of recent progresses and future directions. J Coat Technol Res 13:11–29CrossRef
14.
Tedim J, Poznyak SK, Kuznetsova A, Raps D, Hack T, Zheludkevich ML, Ferreira MGS (2010) Enhancement of active corrosion protection via combination of inhibitor-loaded nanocontainers. ACS Appl Mater Interfaces 2:1528–1535CrossRef
15.
Jud K, Kausch HH, Williams JG (1981) Fracture mechanics studies of crack healing and welding of polymers. J Mater Sci 16:204–210CrossRef
16.
Kumar N, Subasri R (2012) Self-healing coatings by sol-gel process: a review of recent patent literature. Recent Pat Corros Sci 2:148–163CrossRef
17.
Skorb EV, Fix D, Andreeva DV, Mohwald H, Shchukin DG (2009) Surface-modified mesoporous SiO2 containers for corrosion protection. Adv Funct Mater 19:2373–2379CrossRef
18.
Mishra T, Mohanty AK, Tiwari SK (2013) Recent development in clay based functional coating for corrosion protection. Key Eng Mater 571:93–109CrossRef
19.
Lanzara G, Yoon Y, Liu H, Peng S, Lee WI (2009) Carbon nanotube reservoirs for self-healing materials. Nanotechnology 20:335704–335711CrossRef
20.
Jung IK, Gurav JL, Bangi UKH, Baek S, Ho Park H (2012) Silica xerogel films hybridized with carbon nanotubes by single step sol-gel processing. J Non-Cryst Solids 358:550–556CrossRef
21.
Zheludkevich ML, Poznyak SK, Rodrigues LM, Raps D, Hack T, Dick LF, Nunes T, Ferreira MGS (2010) Active protection coatings with layered double hydroxide nanocontainers of corrosion inhibito. Corros Sci 52:602–611CrossRef
22.
Tedim J, Zheludkevich ML, Salak AN, Lisenkov A, Ferreira MGS (2011) Nanostructured LDH-container layer with active protection functionality. J Mater Chem 21:2115464–21115470CrossRef
23.
Stimpfling T, Leroux F, Hintze-Bruenning H (2014) Organo-modified layered double hydroxide in coating formulation to protect AA 2024 from corrosion. Colloids Surf A: Physicochem Eng Asp 458:147–154CrossRef
24.
Lvov YM, Shchukin DG, Mohwald H, Price RR (2008) Halloysite clay nanotubes for controlled release of protective agents. ACS Nano 2:814–820CrossRef
25.
Abdullayev E, Lvov Y (2011) Clay nanotubes for controlled release of protective agents- a review. J Nanosci Nanotechnol 11:10007–10026CrossRef
26.
Abdullayev E, Lvov Y (2010) Clay nanotubes for corrosion inhibitor encapsulation: release control with end stoppers. J Mater Chem 20:6681–6687CrossRef
27.
Fix D, Andreeva DV, Lvov YM, Shchukin DG, Möhwald H (2009) Application of inhibitor-loaded halloysite nanotubes in active anti-corrosive coatings. Adv Funct Mater 19:1720–1727CrossRef
28.
Darmanin T, Guittard F (2014) Recent advances in the potential applications of bioinspired superhydrophobic materials. J Mater Chem A 2:16319–16359CrossRef
29.
Parkin IP (2005) Palgrave RG, Self-cleaning coatings. J Mater Chem 1:1689–1695CrossRef
30.
Ganesh VA, Raut HK, Nair AS, Ramakrishna S (2011) A review on self-cleaning coatings. J Mater Chem 21:16304–16322CrossRef
31.
Ragesh P, Ganesh VA, Nair SV, Nair AS (2014) A review on self-cleaning and multifunctional materials. J Mater Chem A 2:14773–14797CrossRef
32.
Parent O, Ilinca A (2011) Anti-icing and de-icing techniques for wind turbines: Critical review. Cold Reg Sci Technol 65:88–96CrossRef
33.
Fillion RM, Riahi AR, Edrisy A (2014) A review of icing prevention in photovoltaic devices by surface engineering. Renew Sust Energ Rev 32:797–809CrossRef
34.
Yingdi Y, Nengzhen L, Xiangao X, Yiming X, Qinghua Z, Xiaoli Z (2014) Fabricating mechanism and preparation of anti-icing & icephobic coating. Prog Chem 26:214–222
35.
Ryzhkin IA, Petrenko VF (1997) Physical mechanisms responsible for ice adhesion. J Phys Chem B 101:6267–6270CrossRef
36.
Sarkar DK, Farzaneh M (2009) Superhydrophobic coatings with reduced ice adhesion. J Adhes Sci Technol 23:1215–1237CrossRef
37.
Saleema N, Farzaneh M, Paynter RW, Sarkar DK (2011) Prevention of ice accretion on aluminum surfaces by enhancing their hydrophobic properties. J Adhes Sci Technol 25:27–40CrossRef
38.
Huang Y, Hu M, Yi S, Liu X, Li H, Huang C, Luo Y, Li Y (2012) Preparation and characterization of silica/fluorinated acrylate copolymers hybrid films and the investigation of their icephobicity. Thin Solid Films 520:5644–5651CrossRef
39.
Fu Q, Wu X, Kumar D, Ho JWC, Kanhere PD, Srikanth N, Liu E, Wilson P, Chen Z (2014) Development of sol−gel icephobic coatings: effect of surface roughness and surface energy. ACS Appl Mater Interfaces 6:20685–20692CrossRef
40.
Fu QT, Liu EJ, Wilson P, Chen Z (2015) Ice nucleation behaviour on sol–gel coatings with different surface energy and roughness. Phys Chem Chem Phys 17:21492–21500CrossRef
41.
Medda SK, De G (2009) Inorganic-organic nanocomposite-based hard coatings on plastics using in-situ generated nano-SiO2 bonded with ≡Si-O-Si-PEO hybrid network. Ind Eng Chem Res 48:4326–4333CrossRef
42.
Medda SK, Kundu D, De G (2003) Inorganic-organic hybrid coatings on polycarbonate, spectroscopic studies on the simultaneous polymerizations of methacrylate and silica networks. J Non-Cryst Solids 318:149–156CrossRef
43.
Hwang DK, Moon JH, Shul YG, Jung KT, Kim DH, Lee DW (2003) Scratch resistant and transparent UV- protective coating on polycarbonate. J Sol-Gel Sci Technol 26:783–787CrossRef
44.
Lee MS, Jo NJ (2002) Coating of methyltriethoxysilane-modified colloidal silica on polymer substrates for abrasion resistance. J Sol-Gel Sci Technol 24:175–180CrossRef
45.
Woulters MEL, Wolfs DP, van der Linde MC, Hovens JHP, Tinnemans AHA (2004) Transparent UV curable antistatic hybrid coatings on polycarbonate prepared by the sol-gel method. Prog Org Coat 51:312–320CrossRef
46.
Sangermano M, Messori M (2010) Scratch resistance enhancement of polymer coatings. Macromol Mater Eng 295:603–612CrossRef
47.
Jeon SJ, Lee JJ, Kim W, Chang TS, Koo SM (2008) Hard coating films based on organosilane-modified boehmite nanoparticles under UV/thermal dual curing. Thin Solid Films 516:3904–3909CrossRef
48.
Kasemann R, Schmidt HK, Wintrich E (1994) A new type of a sol-gel-derived inorgnic-organic nanocomposite. Proc Mater Res Soc 346:915–921CrossRef
49.
Chen Q, Tan JGH, Shen SC, Liu YC, Ng WK, Zeng XT (2007) Effect of boehmite nanorods on the properties of glycidoxypropyl-trimethoxysilane (GPTS) hybrid coatings. J Sol-Gel Sci Technol 44:125–131CrossRef
50.
Amerio E, Fabbri P, Malucelli G, Messori M, Sangermano M, Taurino R (2008) Scratch resistance of nano-silica reinforced acrylic coatings. Prog Org Coat 62:129–133CrossRef
51.
Sowntharya L, Gundakaram RC, Soma Raju KRC, Subasri R (2013) Effect of addition of surface modified nanosilica into silica-zirconia hybrid sol-gel matrix. Ceram Int 39:4245–4252CrossRef
52.
Sowntharya L, Lavanya S, Ravi Chandra G, Hebalkar NY, Subasri R (2012) Investigations on the mechanical properties of hybrid nanocomposite hard coatings on polycarbonate. Ceram Int 38:4221–4228CrossRef
53.
Gururaj T, Soma Raju KRC, Subasri R, Padmanabham G (2018) Indian patent no. 295221 entitled “Improved scratch and abrasion resistant compositions for coating plastic surfaces, A process for their preparation and a process for coating using the compositions”
54.
Hozumi A, Kato Y, Takai O (1996) Two-layer hard coatings on transparent resin substrates for improvement of abrasion resistance. Surf Coat Technol 82:16–22CrossRef
55.
Shin YJ, Oh MH, Yoon YS, Shin JS (2008) Hard coatings on polycarbonate plate by sol-gel reactions of melamine derivative PHEMA and silicates. Polym Eng Sci 48:1289–1295CrossRef
56.
Gururaj T, Subasri R, Soma Raju KRC, Padmanabham G (2011) Effect of plasma pre-treatment on adhesion and mechanical properties of UV-curable coatings on plastics. Appl Surf Sci 257:4360–4364CrossRef
57.
Soma Raju KRC, Sowntharya L, Lavanya S, Subasri R (2012) Effect of plasma pre-treatment on adhesion and mechanical properties of sol-gel nanocomposite coatings on polycarbonate. Compos Interfaces 19:259–270CrossRef
58.
Le Bail N, Lionti K, Benayoun S, Pavan S, Thompson L, Gervais C, Dubois G, Toury T (2015) Scratch-resistant sol–gel coatings on pristine polycarbonate. New J Chem 39:8302–8310CrossRef
59.
Yavas H, Öztürk Selçuk CD, Özhan AES, Durucan C (2014) A parametric study on processing of scratch resistant hybrid sol–gel silica coatings on polycarbonate. Thin Solid Films 556:112–119CrossRef
60.
Raju KRCS, Subasri R (2015) Sol-gel nanocomposite hard coatings. In: Aliofkhazraei M (ed) Anti-abrasive naanocoatings: current and future applications. Woodhead Publishing (an imprint of Elsevier), Sawston, pp 105–132
61.
Subasri R (2013) Properties of nanocomposite hard coatings on polycarbonate. In: Mittal V (ed) Polymer nanocomposite coatings. CRC Press (Taylor & Francis Group), Boca Raton, pp 167–184
62.
Schottner G (2001) Hybrid sol-gel-derived polymers: applications of multifunctional materials. Chem Mater 13:3422–3435CrossRef
63.
Dinelli M, Fabbri E, Bondioli F (2011) TiO2–SiO2 hard coating on polycarbonate substrate by microwave assisted sol–gel technique. J Sol-Gel Sci Technol 58:463–469CrossRef
64.
Sowntharya L, Subasri R (2013) A comparative study of different curing techniques for SiO2-TiO2 hybrid coatings on polycarbonate. Ceram Int 39:4689–4693CrossRef
65.
Berendjchi A, Khajavi R, Yazdanshenas ME (2011) Fabrication of superhydrophobic and antibacterial surface on cotton fabric by doped silica-based sols with nanoparticles of copper. Nanoscale Res Lett 6:594CrossRef
66.
Lantano C, Alfieri I, Cavazza A, Corradini C, Lorenzi A, Zucchetto A, Montenero A (2014) Natamycin based sol–gel antimicrobial coatings on polylactic acid films for food packaging. Food Chem 165:342–347CrossRef
67.
Poongodi G, Anandan P, Mohan Kumar R, Jayavel R (2015) Studies on visible light photocatalytic and antibacterial activities of nanostructured cobalt doped ZnO thin films prepared by sol–gel spin coating method. Spectrochim Acta A Mol Biomol Spectrosc 148:237–243CrossRef
68.
Ismail WA, Ali ZA, Puteh R (2013) Transparent nanocrystallite silver for antibacterial coating. J Nanomater 2013. Article ID 901452
69.
Halevas E, Nday CM, Kaprara E, Psycharis V, Raptopoulou CP, Jackson GE, Litsardakis G, Salifoglou A (2015) Sol–gel encapsulation of binary Zn(II) compounds in silica nanoparticles: structure–activity correlations in hybrid materials targeting Zn(II) antibacterial use. J Inorg Biochem 151:150–163CrossRef
70.
Zhang Y, Smith SJ, Kyle GP, Stackhouse PW Jr (2010) Modeling the potential for thermal concentrating solar power technologies. Energy Policy 38:7884–7897CrossRef
71.
Granqvist CG (1991) Solar energy materials. Appl Phys A Mater Sci Process 52:83–93CrossRef
72.
73.
Mills D (2004) Advances in solar thermal electricity technology. Sol Energy 76:19–31CrossRef
74.
Behar O, Khellaf A, Mohammedi K (2013) A review of studies on central receiver solar thermal power plants. Renew Sust Energ Rev 23:12–39CrossRef
75.
Kennedy CE (2002) Review of mid-to high temperature solar selective absorber materials, technical report July 2002, NREL/TP-520-31267, National Renewable Energy Laboratory, Golden, USA. Contract no: DE-AC36-99-GO10337
76.
Shuxi Z, Ewa W (2006) Optimization of solar absorbing three-layered coatings. Sol Energy Mater Sol Cells 90:243–261CrossRef
77.
Selvakumar N, Barshilia HC (2012) Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high- temperature solar thermal applications. Sol Energy Mater Sol Cells 98:1–23CrossRef
78.
Barshilia HC, Prashant Kumar KS, Rajam BA (2011) Structure and optical properties of Ag–Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering. Sol Energy Mater Sol Cells 95:1707–1715CrossRef
79.
Mathews PA, Kalidindi SRRC, Bhardwaj S, Subasri R (2013) Sol–gel functional coatings for solar thermal applications: a review of recent patent literature. Recent Pat Mater Sci 6:195–213CrossRef
80.
Joly M, Antonetti Y, Python M, Gonzalez Lazo MA, Gascou T, Hessler-Wyser A, Scartezzini JL, Schüler A (2014) A selective solar absorber coating on receiver tubes for CSP –energy-efficient production process by sol-gel dip-coating and subsequent induction heating. Energy Procedia 57:487–496CrossRef
81.
Katumba G, Olumekor L, Forbes A, Makiwa G, Mwakikunga B, Lu J, Wäckelgard E (2008) Optical, thermal and structural characteristics of carbon nano particles embedded in ZnO and NiO as selective absorbers. Sol Energy Mater Sol Cells 92:1285–1292CrossRef
82.
Bostrom T, Westin G, Wackelgard E (2007) Optimization of solution-chemically derived solar absorber spectrally selective surface. Sol Energy Mater Sol Cells 91:38–43CrossRef
83.
Bostrom T, Jensen J, Valizadeh S, Westin G, Wackelgard E (2008) ERDA of Ni-Al2O3/SiO2 solar thermal selective absorbers. Sol Energy Mater Sol Cells 92:1177–1182CrossRef
84.
Li Z, Zhao J, Ren L (2012) Aqueous solution-chemical derived Ni-Al2O3 solar selective absorbing coatings. Sol Energy Mater Sol Cells 105:90–95CrossRef
85.
Subasri R, Soma Raju KRC, Reddy DS, Hebalkar NY, Padmanabham G (2016) Sol–gel derived solar selective coatings on SS 321 substrates for solar thermal applications. Thin Solid Films 598:46–53CrossRef
86.
del Mercato LL, Moffa M, Rinaldi R, Pisignano D (2015) Ratiometric organic fibers for localized and reversible ion sensing with micrometer-scale spatial resolution. Small 11:6417–6424CrossRef
87.
Zusman R, Rottman C, Ottolenghi M, Avnir D (1990) Doped sol-gel glasses as chemical sensors. J Non-Cryst Solids 122:107–109CrossRef
88.
Chaudhury NK, Gupta R, Gulia S (2007) Sol-gel technology for sensor applications. Def Sci J 57:241–253CrossRef
89.
Rao MS, Gray J, Dave BC (2003) Smart glasses: molecular programming of dynamic responses in organosilica sol-gels. J Sol-Gel Sci Technol 26:553–560CrossRef
90.
MacCraith BD, Ruddy V, Potter C, O’Kelly B, McGlip JF (1991) Optical waveguide sensor using evanescent wave excitation of fluorescent, dye in sol-gel glass. Electron Lett 27:1247–1248CrossRef
91.
Husing N, Schubert U (1998) Aerogel airy material: Structure, chemistry, structure and properties. Angew Chem Int Ed 37:22–29CrossRef
92.
Horowitz E, Dawnay EJC, Fardad MA, Green M, Yeatman EM (1997) Towards better control of sol-gel film processing for optical device applications. J Non Linear Opt Phys Mater 6:1–18CrossRef
93.
Moon HJ, Hyung HP, Dong JK, Sang HH, Choi SY, Paik JT (1997) SiO2 aerogel film as a novel intermetal dielectric. J Appl Phys 82:1299–1305CrossRef
94.
Davis ME (2002) Ordered porous materials for emerging applications. Nature 417:813–816CrossRef
95.
Raman VI, Palmese GR (2005) Nanoporous thermosetting polymers. Langmuir 21:1539–1546CrossRef
96.
Mougenot P, Koch M, Dupont I, Schneider YJ, Marchand-Brynaert J (1996) Surface functionalisation of polyethylene terephthalate film and membranes by controlled wet chemistry: II reactivity assays of hydroxyl chain ends. J Colloid Interface Sci 177:162–170CrossRef
97.
98.
Pedroza G, de Azevedo WM, Khoury HJ, de Silva EF Jr (2002) Gamma radiation detection using sol-gel doped with lanthanides ions. Appl Radiat Isot 56:563–566CrossRef
99.
Hanaa HM (2011) Effect of gamma-irradiation on the optical properties of silicate glass doped Nd2O3 prepared by sol-gel technique. J Radiat Res Appl Sci 4:1107–1120
100.
Sun JT, Huang YD, Cao HL, Gong GF (2004) Effects of ambient-temperature curing agents on the thermal stability of poly(methylphenylsiloxane). Polym Degrad Stab 85:725–731CrossRef
101.
Wouters MEL, Wolfs DP, van der Linde MC, Hovens JHP, Tinnemans AHA (2004) Transparent UV curable antistatic hybrid coatings on polycarbonate prepared by the sol-gel method. Prog Org Coat 51:312–320CrossRef
102.
Najafabadi AH, Razavi RS, M R, Rahim H (2014) A new approach of improving rain erosion resistance of nanocomposite sol-gel coatings by optimization process factors. Met Mater Trans A 45:2522–2531CrossRef
103.
Grundwurmer M, Nuyken O, Meyer M, Wehr J, Schupp N (2007) Sol-gel derived erosion protection coatings against damage caused by liquid impact. Wear 263:318–329CrossRef
104.
Yu-wei S, Shu-bin W, Jian ZHANG (2011) Effects of CBS coating on dielectric properties of porous Si3N4 ceramic at high temperature and high frequency. J Mater Eng 1:42–45
105.
Yonglin L, Qiuru W, Jichuan H (2014) Fabrication of durable superhydrophobic coatings with hierarchical structure on inorganic radome materials. Ceram Int 40:10907–10914CrossRef
Metadata
Title
Multifunctional Sol-Gel Nanocomposite Coatings for Aerospace, Energy, and Strategic Applications: Challenges and Perspectives
Authors
R. Subasri
K. R. C. Soma Raju
Copyright Year
2020
Book
Handbook of Advanced Ceramics and Composites

Print ISBN: 978-3-030-16346-4

Electronic ISBN: 978-3-030-16347-1

Copyright Year: 2020

DOI
https://doi.org/10.1007/978-3-030-16347-1_49

Premium Partners

    Image Credits