Top

Metal Science and Heat Treatment

Published in:

07-09-2022 | STRUCTURAL STEELS

Novel Economically Alloyed Steel for Liquefied Natural Gas Equipment and its Heat Treatment Regime

Authors: E. V. Yakushev, L. V. Bagirova, V. N. Zikeev, A. A. Pridein

Published in: Metal Science and Heat Treatment | Issue 3-4/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Heat treatment is developed for commercial rolled thick sheets of cryogenic steel for liquefied natural gas equipment. It is shown that treatment guarantees the required mechanical and tribological properties. Performance specifications for rolled thick sheets are developed. Rolled sheets with thickness up to 50 mm are produced for the first time within the Russian Federation from cryogenic steel type 0N6 with additional copper alloying guaranteeing good operating properties and reliability for cryogenic devices and tanks operating down to –196°C.

previous article Effect of Heat Treatment on Alloy GH901 Microstructure and Mechanical Properties

next article Influence of Sliding Rate and Load with Friction on NiTi Shape Memory Alloy Wear Resistance

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Here and subsequently throughout the text element content is given in weight factions expressed as a %.

S. I. Zubov, L. V. Prokopenko, and O. V. Samokhina (Ural Steel JSC, Novotroitsk) took part in this work.

E. A. Ulyanin, and S. A. Sorokina, Steels and Alloys for Cryogenic Technology [in Russian], Metallurgiya, Moscow (1984).

T. Kagaya, H. Furuya, and T. Kamo, “New steel plate for LNG storage tank,” in: Nippon Steel. Sumitimo Tech. Report No. 110, September (2015).

ASTM A553_A553M. Standard Specification for Pressure Vessel Plates. Alloy Steel Quenched and Tempered 7, 8, and 9 Ni, STANDARD by ASTM International [S. 1] (2014).

D. A. Diteinenko, B. P. Sharov, V. N. Zinkeev, et al., “Production and properties of steel 0N6 for cryogenic engineering,” Stal’, No. 7, 69 – 71 (1982).

E. Kh. Shakhpazov and V. N. Zikeev, “Economically alloyed especially cold resistant steel for storage tanks and transportation of liquid natural gas,” Metallurg, No. 4, 63 – 65 (2006).

N. Yu. Matrosov, V. N. Zinkeev, V. S. Nikitin, et al., “Development of prospective specimens of cryogenic steel for gas lines and storage of natural gas intended for use under Arctic conditions,” Artika: Ekol. Econom., No. 4(24), 80 – 90 (2016).

V. N. Zinkeev, Yu. D. Morozov, B. P. Sharov, and M. Yu. Matrosov, “Prospects of producing especially cold-resistant ferritic steel economically alloyed with nickel for storage and transportation of liquid natural gas,” Metallurg, No. 2, 31 – 35 (2020).

P. P. Poletskov, S. V. Denisov, O. A. Nikitenko, et al., “Study of the effect of multistage heat treatment on features of cryogenic structural steel microstructure formation,” Vestn. Magnitogorsk. Gos. Tekhn. Univ. im G. I. Nosova, 16(2), 29 – 40 (2018).

Kh. Tamura, Ya. Yamadzaki, and K. Kono, Welding of Steels Used at Low Temperatures [in Russian], Mashinostroenie, Moscow (1978).

10.

L. I. G; adshtein, O. Ya. Vesolainen, R. A. Milievskii, et al., “Effect of sulphurous nonmetallic inclusions on deformation and failure of cold-resistant nickel steel,” Stal’, No. 5, 9 – 15 (1985).

11.

I. F. Pemov, E. V. Yakushev, S. P. Zubov, et al., “Development and pilot plant equipment for rolled sheet production technology for cryogenic steels for storing liquid natural gas,” Chern. Metall., Byul. Nauch.-Tekh. Ékonom. Inform., 76(3), 222 – 227 (2020).

Title: Novel Economically Alloyed Steel for Liquefied Natural Gas Equipment and its Heat Treatment Regime
Authors: E. V. Yakushev
L. V. Bagirova
V. N. Zikeev
A. A. Pridein
Publication date: 07-09-2022
Publisher: Springer US
Published in: Metal Science and Heat Treatment / Issue 3-4/2022
Print ISSN: 0026-0673
Electronic ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-022-00785-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2022

Second Phase Precipitation on Heating Quenched Ti – 14% Mo Alloy

Metal Science and Heat Treatment Volume 64, Number 3

Effect of Reinforcement with Ceramic Microparticles on Structure and Properties of Composites with an Aluminum Matrix

Preparation and Study of Titanium Coating Deposited on a Magnesium Substrate by High-Velocity Oxy-Fuel Spraying

Helical Substructures of Close-Packed Metals Determined by a Universal Building Unit (Tetrablock)

Effect of Carburization on the Structure and Corrosion Resistance of Low-Carbon Steel C22

Premium Partners