Top

Metals and Materials International

Published in:

13-05-2022

Novel Strategy for Reducing Residual Stress in Titanium Alloy Parts Obtained via Additive Manufacturing

Authors: Xinfa Sun, Yucheng Zhao, Weiming Yang, Wenyu Li, Dengfeng Yang, Haishun Liu

Published in: Metals and Materials International | Issue 12/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The additive manufacturing of titanium alloy parts has important scientific significance and practical value. Controlling the distribution of residual stress caused by the high cooling rate and temperature gradient is the key to regulating the performance of devices obtained from additive manufacturing. In this work, the effects of the interlayer scanning angle on the residual stress in Ti–6Al–4V parts manufactured by selective laser melting were investigated by finite element simulations. We studied how changing the interlayer deflection angle alleviated residual stress under different energy inputs. The results showed that the residual stress in the z-direction was reduced by the deflection angle of 67° and 90°, and the non-uniform distribution of residual stress was reduced by a deflection angle of 67°. The combination of a chessboard pattern and interlayer deflection angle greatly alleviated the generation of residual stress. This work has important guiding significance for the additive manufacturing design of high-quality and high-performance titanium alloy devices.

Graphical Abstract

previous article Evaluation of Microstructure, Residual Stress, and Mechanical Properties in Different Planes of Wire + Arc Additive Manufactured Nickel-Based Superalloy

next article Influence of Heat Treatment on Microstructure and Mechanical Properties of TC4 Fabricated by Laser Melting Deposition

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

F. Bartolomeu, S. Faria, O. Carvalho, E. Pinto, N. Alves, F.S. Silva, G. Miranda, Mater. Sci. Eng. A 663, 181 (2016). https://doi.org/10.1016/j.msea.2016.03.113CrossRef

A.T. Erturk, M.E. Bulduk, G. Tarakçi, G. Özer, E. Yarar, Met. Mater. Int. 28, 155 (2022). https://doi.org/10.1007/s12540-021-01038-yCrossRef

M.D. Barath Kumar, M. Manikandan, Metals Mater. Int. 28, 54 (2022). https://doi.org/10.1007/s12540-021-01015-5CrossRef

J.-B. Lee, D.-I. Seo, H.-Y. Chang, Met. Mater. Int. 27, 3095 (2021). https://doi.org/10.1007/s12540-021-01085-5CrossRef

A. Das, M. Shukla, Met. Mater. Int. 27, 2461 (2021). https://doi.org/10.1007/s12540-020-00646-4CrossRef

G. Li, L. Wang, W. Pan, F. Yang, W. Jiang, X. Wu, X. Kong, K. Dai, Y. Hao , Sci. Rep. 6, 34072 (2016). https://doi.org/10.1038/srep34072CrossRef

Y. Zheng, Q. Han, D. Li, F. Sheng, Z. Song, J. Wang, Mater. Design 197, 109219 (2020). https://doi.org/10.1016/j.matdes.2020.109219CrossRef

D. Gu, Y.-C. Hagedorn, W. Meiners, G. Meng, R.J.S. Batista, K. Wissenbach, R. Poprawe, Acta Mater. 60, 3849 (2012). https://doi.org/10.1016/j.actamat.2012.04.006CrossRef

P. Mercelis, J.P. Kruth, Rapid Prototyping J. 12, 254 (2006). https://doi.org/10.1108/13552540610707013CrossRef

10.

L. Parry, I.A. Ashcroft, R.D. Wildman, Addit. Manuf. 12, 1 (2016). https://doi.org/10.1016/j.addma.2016.05.014CrossRef

11.

G. Vastola, G. Zhang, Q.X. Pei , Y.-W. Zhang, Addit. Manuf. 12, 231 (2016). https://doi.org/10.1016/j.addma.2016.05.010CrossRef

12.

G.M. Karthik, H.S. Kim, Met. Mater. Int. 27, 1 (2021). https://doi.org/10.1007/s12540-020-00931-2CrossRef

13.

S. Lee, J. Kim, J. Choe, S.-W. Kim, J.-K. Hong, Yoon Suk Choi, Met. Mater. Int. 27, 78 (2021). https://doi.org/10.1007/s12540-020-00770-1CrossRef

14.

H. Galarraga, D.A. Lados, R.R. Dehoff, M.M. Kirka, P. Nandwana, Addit. Manuf. 10, 47 (2016). https://doi.org/10.1016/j.addma.2016.02.003CrossRef

15.

A.M. Jonaet, H.S. Park, C.M. Lee, Int. J. Adv. Manuf. Technol. 113, 2227 (2021). https://doi.org/10.1007/s00170-021-06711-5CrossRef

16.

K. Guan, Z. Wang, M. Gao, X. Li, X. Zeng, Mater. Design 50, 581 (2013). https://doi.org/10.1016/j.matdes.2013.03.056CrossRef

17.

Y.M Zou, Y.S. Wu, K.F Li, C.L. Tan, Z.G. Qiu, D.C. Zeng, Mater. Lett. 272, 127824 (2020). https://doi.org/10.1016/j.matlet.2020.127824CrossRef

18.

I. Yadroitsev, A. Gusarov, I. Yadroitsava, I. Smurov, J. Mater. Process. Tech. 210, 1624 (2010). https://doi.org/10.1016/j.jmatprotec.2010.05.010CrossRef

19.

W. Yan, Y. Qian, W. Ge, S. Lin, W.K. Liu, F. Lin, G.J. Wagner, Mater. Design 141, 210 (2018). https://doi.org/10.1016/j.matdes.2017.12.031CrossRef

20.

Y. Lian, Z. Gan, C. Yu, D. Kats, W.K. Liu, G.J. Wagner, Mater. Design 169, 107672 (2019). https://doi.org/10.1016/j.matdes.2019.107672CrossRef

21.

M. Labudovic, D. Hu, R. Kovacevic, J. Mater. Sci. 38, 35 (2003). https://doi.org/10.1023/A:1021153513925CrossRef

22.

H.G. Li, T.L. Lee, W. Zheng, Y.Z. Lu, H.B.C. Yin, J.X. Yang, Y.J. Huang, J.F. Sun, Mater. Lett. 263, 127247 (2020). https://doi.org/10.1016/j.matlet.2019.127247CrossRef

23.

J. Cao, M.A. Gharghouri, P. Nash, J. Mater. Process. Tech. 237, 409 (2016). https://doi.org/10.1016/j.jmatprotec.2016.06.032CrossRef

24.

Q. Liu, Y. Danlos, B. Song, B. Zhang, S. Yin, H. Liao, J. Mater. Process. Tech. 222, 61 (2015). https://doi.org/10.1016/j.jmatprotec.2015.02.036CrossRef

25.

H. Ali, H. Ghadbeigi, K. Mumtaz, Mater. Sci. Eng. A 712, 175 (2018). https://doi.org/10.1016/j.msea.2017.11.103CrossRef

26.

W. Zhang, M. Tong, N.M. Harrison, Addit. Manuf. 36, 101507 (2020). https://doi.org/10.1016/j.addma.2020.101507CrossRef

27.

V. Manvatkar, A. De, T. Debroy, Mater. Sci. Technol. 31, 924 (2015). https://doi.org/10.1179/1743284714Y.0000000701CrossRef

28.

A.V. Gusarov, J.-P. Kruth, Int. J. Heat Mass Trans. 48, 3423 (2005). https://doi.org/10.1016/j.ijheatmasstransfer.2005.01.044CrossRef

29.

W. Huang, Y. Zhang, J. Manuf. Process. 42, 139 (2019). https://doi.org/10.1016/j.jmapro.2019.04.019CrossRef

30.

F. Verhaeghe, T. Craeghs, J. Heulens, L. Pandelaers, Acta Mater. 57, 6006 (2009). https://doi.org/10.1016/j.actamat.2009.08.027CrossRef

31.

A. Hussein, L. Hao, C. Yan, R. Everson, Mater. Design 52, 638 (2013). https://doi.org/10.1016/j.matdes.2013.05.070CrossRef

32.

W. Ya, B. Pathiraj, S. Liu, J. Mater. Process. Tech. 230, 217 (2016). https://doi.org/10.1016/j.jmatprotec.2015.11.012CrossRef

33.

C. Chen, J. Yin, H. Zhu, Z. Xiao, L. Zhang, X. Zeng, Int. J. Mach. Tools Manuf 145, 103433 (2019). https://doi.org/10.1016/j.ijmachtools.2019.103433CrossRef

34.

I. Yadroitsev, I. Yadroitsava, Virtual Phys. Prototyp. 10, 67 (2015). https://doi.org/10.1080/17452759.2015.1026045CrossRef

35.

J. Xu, Y. Ding, Y. Gao, H. Wang, Y. Hu, D. Zhang, Mater. Design 209, 109940 (2021). https://doi.org/10.1016/j.matdes.2021.109940CrossRef

36.

Y. Lu, S. Wu, Y. Gan, T. Huang, C. Yang, L. Junjie, J. Lin, Opt. Laser Technol. 75, 197 (2015). https://doi.org/10.1016/j.optlastec.2015.07.009CrossRef

37.

T. Mukherjee, W. Zhang, T. DebRoy, Comput. Mater. Sci. 126, 360 (2017). https://doi.org/10.1016/j.commatsci.2016.10.003CrossRef

38.

Y. Li, K. Zhou, P. Tan, S.B. Tor, C.K. Chua, K.F. Leong, Int. J. Mech. Sci. 136, 24 (2018). https://doi.org/10.1016/j.ijmecsci.2017.12.001CrossRef

39.

E. Macherauch, in Application of Fracture Mechanics to Materials and Structures, ed. by G.C. Sih, E. Sommer, W. Dahl (Martinus Nijhoff Publishers, Hague, 1984), pp. 157–192

40.

P. Tan, F. Shen, B. Li, K. Zhou, Mater. Design 168, 107642 (2019). https://doi.org/10.1016/j.matdes.2019.107642CrossRef

41.

J. Ahn, E. He, L. Chen, R.C. Wimpory, J.P. Dear, C.M. Davies, Mater. Design 115, 441 (2017). https://doi.org/10.1016/j.matdes.2016.11.078CrossRef

42.

Z. Zheng, X. Jin, Y. Bai, Y. Yang, C. Ni, W.F. Lu, H. Wang, Mater. Sci. Eng. A 831, 142236 (2022). https://doi.org/10.1016/j.msea.2021.142236CrossRef

Title: Novel Strategy for Reducing Residual Stress in Titanium Alloy Parts Obtained via Additive Manufacturing
Authors: Xinfa Sun
Yucheng Zhao
Weiming Yang
Wenyu Li
Dengfeng Yang
Haishun Liu
Publication date: 13-05-2022
Publisher: The Korean Institute of Metals and Materials
Published in: Metals and Materials International / Issue 12/2022
Print ISSN: 1598-9623
Electronic ISSN: 2005-4149
DOI: https://doi.org/10.1007/s12540-022-01179-8

Springer Professional

Abstract

Graphical Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 12/2022

Successful Consolidation of Inoculant Alloy by Controlling Brazil Nut Effect and Capillary Force

Microstructure and Tribological Behaviour of Inconel-625 Superalloy Produced by Selective Laser Melting

Effects of ZrB2 Nanoparticles on the Microstructures and Tensile Properties of a Hot Extruded In Situ AA6111 Composite

Effect of Cooling Rate on Magnetic Properties of Fe-3.3 wt% Si Non-oriented Electrical Steel

Inclusion Agglomeration on Ultra-Low C Liquid Steel Surface: Roles of Ti in the Steel and the Oxygen Potential

Effect of Ball-Milling Process on Microstructures and Mechanical Properties of Heterostructured 2024Al Alloy Prepared by Powder Thixoforming

Premium Partners