Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Applied Composite Materials
Published in: Applied Composite Materials 1/2017

14-09-2016

On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces

Authors: R. Kießling, J. Ihlemann, M. Pohl, M. Stommel, C. Dammann, R. Mahnken, M. Bobbert, G. Meschut, F. Hirsch, M. Kästner

Published in: Applied Composite Materials | Issue 1/2017

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Multi-material lightweight designs are a key feature for the development of innovative and resource-efficient products. In the development of a hybrid composite, the interface between the joined components has to be considered in detail as it represents a typical location of the initialization of failure. This contribution gives an overview of the simulative engineering of metal-composite interfaces. To this end, several design aspects on the microscale and macroscale are explained and methods to model the mechanical behavior of the interface within finite element simulations. This comprises the utilization of cohesive elements with a continuum description of the interface. Likewise, traction-separation based cohesive elements, i.e. a zero-thickness idealization of the interface, are outlined and applied to a demonstration example. Within these finite element simulations, the constitutive behavior of the connected components has to be described by suitable material models. Therefore, inelastic material models at large strains are formulated based on rheological models.
previous article Numerical Modelling and Damage Assessment of Rotary Wing Aircraft Cabin Door Using Continuum Damage Mechanics Model

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Abaqus/Standard: Theory manual - version 6.14. Dassault Systemes Simulia Corp (2014)
2.
Anyfantis, K.N.: Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials. Compos. Struct. 94, 2632–2639 (2012)CrossRef
3.
Ashby, M.F., Bréchet, Y.J.M.: Design hybrid materials. Acta Mater. 51, 5801–5821 (2003)CrossRef
4.
Banea, M.D., da Silva, L.F.M.: Adhesively bonded joints in composite materials: An overview. P. I. Mech. Eng. L. J. Mat. 223, 1–18 (2009)
5.
Barenblatt, G.I.: The mathematical theory of equilibrium cracks in brittle fracture. Adv. Appl. Mech. 7(104), 55–129 (1962)CrossRef
6.
Bertho, J., Stolojan, V., Abel, M.L., Watts, J.F.: The effect of silane incorporation on a metal adhesive interface: A study by electron energy loss spectroscopy. Micron 41(2), 130–134 (2010)CrossRef
7.
8.
Bruzzone, A.A., Costa, H.L., Lonardo, P.M., Lucca, D.A.: Advances in engineered surfaces for functional performance. CIRP Ann.-Manuf. Techn. 57(2), 750–769 (2008)
9.
Byskov-Nielsen, J., Boll, J.V., Holm, A.H., Højsholt, R., Balling, P.: Ultra-high-strength micro-mechanical interlocking by injection molding into laser-structured surfaces. Int. J. Adhes. Adhes. 30(6), 485–488 (2010)CrossRef
10.
Camacho, G., Ortiz, M.: Computational modelling of impact damage in brittle materials. Int. J. Solids Struct. 33(20–22), 2899–2938 (1996)CrossRef
11.
Camanho, P.P., Davila, C.G., de Moura, M.F.: Numerical simulation of mixed-mode progressive delamination in composite materials. J. Compos. Mater. 37 (16), 1415–1438 (2003)CrossRef
12.
Campilho, R.D.S.G., Banea, M.D., Neto, J.A.B.P., da Silva, L.F.M.: Modelling adhesive joints with cohesive zone models: Effect of the cohesive law shape of the adhesive layer. Int. J. Adhes. Adhes. 44, 48–56 (2013)CrossRef
13.
Cognard, J., Davies P., Sohier, L., Créac’hcades, R.: A study of the non-linear behaviour of adhesively-bonded composite assemblies. Compos. Struct. 76 (1–2), 34–46 (2006)CrossRef
14.
da Silva, L.F.M., Campilho, R.D.S.G.: Advances in Numerical Modelling of Adhesive Joints. Springer (2012)
15.
DIN 65148:1986-11: Aerospace: Testing of fibre-reinforced plastics, determination of interlaminar shear strength by tenside test (1986)
16.
DIN EN 6033:2016-02: Aerospace series - carbon fibre reinforced plastics - test method - determination of interlaminar fracture toughness energy - mode I - GIC (2016)
17.
DIN EN 6034:2016-02: Aerospace series - carbon fibre reinforced plastics - test method - determination of interlaminar fracture toughness energy - mode II - GIIC (2016)
18.
DIN EN ISO 14125:2011-05: Fibre-reinforced plastic composites - determination of flexural properties (2011)
19.
Ehlers, W.: A single-surface yield function for geomaterials. Arch. Appl. Mech. 65, 246–259 (1995)CrossRef
20.
Elices, M., Guinea, G.V., Gómez, J, Planas, J.: The cohesive zone model: Advantages, limitations and challenges. Eng. Fract. Mech. 69, 137–163 (2002)CrossRef
21.
Fessel, G., Broughton, J.G., Fellows, N.A., Durodola, J.F., Hutchinson, A.R.: Evaluation of different lap-shear joint geometries for automotive applications. Int. J. Adhes. Adhes. 27(7), 574– 583 (2007)CrossRef
22.
Goldberg, N., Donner, H., Ihlemann, J.: Evaluation of hyperelastic models for unidirectional short fibre reinforced materials using a representative volume element with refined boundary conditions. Tech. Mech. 35(2), 80–99 (2015)
23.
Grujicic, M., Sellappan, V., Omar, M.A., Seyr, N., Obieglo, A., Erdmann, M., Holzleitner, J.: An overview of the polymer-to-metal direct-adhesion hybrid technologies for load-bearing automotive components. J. Mater. Process. Technol. 198, 363–373 (2008)CrossRef
24.
Gurson, A.: Continuum theory of ductile rupture by void nucleation and growth-I. Yield criteria and flow rules for porous ductile media. Eng. Mater. Technol. 99, 2–15 (1977)CrossRef
25.
Gustafson, P.A., Waas, A.M.: The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints. Int. J. Solids Struct. 46(10), 2201– 2215 (2009)CrossRef
26.
Haase, R., Müller, R., Landgrebe, D., Scholz, P., Riemer, M.: Process design for hybrid sheer metal components. Acta Metall. Sin. (Engl. Lett.) 28(12), 1518–1524 (2015)
27.
Haghpanah, B., Chiu, S., Vaziri, A.: Adhesively bonded lap joints with extreme interface geometry. Int. J. Adhes. Adhes. 48, 130–138 (2014)
28.
Haupt, P., Sedlan, K.: Viscoplasticity of elastomeric materials: experimental facts and constitutive modelling. Arch. Appl. Mech. 71, 89–109 (2001)CrossRef
29.
He, X.: A review of finite element analysis of adhesively bonded joints. Int. J. Adhes. Adhes. 31, 248–264 (2011)CrossRef
30.
Heimbs, S., Nogueira, A.C., Hombergsmeier, E., May, M., Wolfrum, J.: Failure behaviour of composite t-joints with novel metallic arrow-pin reinforcement. Compos. Struct. 110, 16–28 (2014)CrossRef
31.
Hinton, M., Soden, P., Kaddour, A.S.: Failure Criteria in Fibre-Reinforced-Polymer Composites: The World-Wide Failure Exercise. Elsevier Science Ltd. (2004)
32.
Holmes, D.W., Loughran, J.G., Suehrcke, H.: Constitutive model for large strain deformation of semicrystalline polymers. Mech. Time-Depend. Mater. 10, 281–313 (2006)
33.
Ihlemann, J.: Beobachterkonzepte und Darstellungsformen der nichtlinearen Kontinuumsmechanik. VDI-Verlag (2014)
34.
Kästner, M., Haasemann, G., Ulbricht, V.: Multiscale XFEM modelling and simulation of the inelastic material behaviour of textile-reinforced polymers. Int. J. Numer. Meth. Eng. 86, 477–498 (2011). doi:10.​1002/​nme.​3065
35.
Kästner, M, Obst, M., Brummund, J., Thielsch, K., Ulbricht, V.: Inelastic material behavior of polymers - experimental characterization, formulation and implementation of a material model. Mech. Mater. 52, 40–57 (2012)CrossRef
36.
Kästner, M., Müller, S., Hirsch, F., Pap, J.S., Jansen, I., Ulbricht, V.: XFEM modeling of interface failure in adhesively bonded fiber-reinforced polymers. Adv. Eng. Mater. 18, 417–426 (2015)CrossRef
37.
Khajehsaeid, H., Arghavani, J., Naghdabadi, R., Sohrabpour, S.: A visco-hyperelastic constitutive model for rubber-like materials: A rate-dependent relaxation time scheme. Int. J. Eng. Sci. 79, 44– 58 (2014)CrossRef
38.
Kießling, R., Landgraf, R., Scherzer, R., Ihlemann, J.: Introducing the concept of directly connected rheological elements by reviewing rheological models at large strains. Int. J. Solids Struct. (in press). doi:10.​1016/​j.​ijsolstr.​2016.​04.​023
39.
Kießling, R., Landgraf, R., Ihlemann, J.: Direct connection of rheological elements at large strains: Application to multiplicative viscoplasticity. Proc. Appl. Math. Mech. 15, 313–314 (2015)CrossRef
40.
Kulkarni, M.G., Geubelle, P.H., Matouš, K: Multi-scale modeling of heterogeneous adhesives: Effect of particle decohesion. Mech. Mater. 41(5), 573–583 (2009)CrossRef
41.
Lemaitre, J.: A Course on Damage Mechanics, 2nd edn. Springer (1996)
42.
Li, N., Chen, P.H., Liu, X.Y., Ma, W., Wang, X.C.: A micro-macro finite element model for failure prediction of comeldTM joints. Compos. Sci. Technol. 117, 334–341 (2015)CrossRef
43.
Lion, A.: Constitutive modelling in finite thermoviscoplasticity: A physical approach based on nonlinear rheological models. Int. J. Plast. 16, 469–494 (2000)CrossRef
44.
Lucchetta, G., Marinello, F., Bariani, P.F.: Aluminum sheet surface roughness correlation with adhesion in polymer metal hybrid overmolding. CIRP Ann.-Manuf. Techn. 60(1), 559–562 (2011)
45.
Mahnken, R.: Strength difference in compression and tension and pressure dependence of yielding in elasto-plasticity. Comput. Method Appl. M. 90, 5057–5080 (2001)
46.
Mahnken, R.: Identification of material parameters for constitutive equations. In: Stein, E., de Borst R., Hughes, T. (eds.) Encyclopedia of Computational Mechanics, chap. 19, pp 637–655. Wiley (2004)
47.
Mahnken, R.: Simulation of strength difference coupled to softening in elasto-plasticity for adhesive materials. Int. J. Adhes. Adhes. 32, 1–14 (2012)CrossRef
48.
Mahnken, R., Schlimmer, M.: Simulation of strength difference in elasto-plasticity for adhesive materials. Int. J. Numer. Methods Eng. 63, 1461–1477 (2005)CrossRef
49.
Matouš, K, Kulkarni, M.G., Geubelle, P.H.: Multiscale cohesive failure modeling of heterogeneous adhesives. J. Mech. Phys. Solids 56(4), 1511–1533 (2008)CrossRef
50.
Momentive: Epikote resin 05475 and epikure curing agent 05443. Technical data sheet (2012)
51.
Needleman, A., Rice, J.R.: Limits to ductility set by plastic flow localization. Mech. Sheet Metal Forming 13, 237–267 (1978)CrossRef
52.
Orifici, A.C., Herszberg, I., Thomson, R.S.: Review of methologies for composite material modelling incorporatin failure. Compos. Struct. 86, 194–210 (2008)CrossRef
53.
Perict’, D., Dettmer, W.: A computational model for generalized inelastic materials at finite strains combining elastic, viscoelastic and plastic material behaviour. Eng. Comput. 20(5/6), 768–787 (2003)CrossRef
54.
Polanco-Loria, M., Clausen, A.H., Berstad, T., Hopperstad, O.S.: Constitutive model for thermoplastics with structural applications. Int. J. Impact. Eng. 37(12), 1207–1219 (2010)CrossRef
55.
Pouriayevali, H., Arabnejad, S., Guo, Y., Shim, V.: A constitutive description of the rate-sensitive response of semi-crystalline polymers. Int. J. Impact. Eng. 62, 35–47 (2013)CrossRef
56.
Rodas, C.O., Zaïri, F., Naït-Abdelaziz, M., Charrier, P.: A thermo-visco-hyperelastic model for the heat build-up during low-cycle fatigue of filled rubbers: formulation, implementation and experimental verification. Int. J. Plast. 79, 217–236 (2016). doi:10.​1016/​j.​ijplas.​2015.​01.​001 CrossRef
57.
Shutov, A.V.: Finite strain viscoplasticity with nonlinear kinematic hardening: Phenomenological modeling and time integration. Comput. Method Appl. M. 197, 2015–2029 (2008)
58.
Shutov, A.V., Kuprin, C., Ihlemann, J.,Wagner, M.F.X., Silbermann, C.: Experimental investigation and numerical simulation of the incremental deformation of a 42crmo4 steel. Mat.-wiss. u. Werkstofftech. 41(9), 765–775 (2010)
59.
Shutov, A.V., Panhans, S., Kreißig, R.: A phenomenological model of finite model of finite strain viscoplasticity with distortional hardening. Z. Angew. Math. Mech. 91, 653–680 (2011)CrossRef
60.
Shutov, A.V., Silbermann, C.B., Ihlemann, J.: Ductile damage model for metal forming ssimulation including refined description of void nucleation. Int. J. Plast. 71, 195–217 (2015)CrossRef
61.
Simo, J., Hughes, T.J.R.: Computational Inelasticity. Springer (1998)
62.
Somer, D.D., Perić, D, de Souza Neto, E.A., Dettmer, W.G.: On the characterisation of elastic properties of long fibre composites using computational homogenisation. Comp. Mater. Sci. 83, 149–157 (2014)CrossRef
63.
Teng, J.G., Yu, T., Fernando, D.: Strengthening of steel structures with fiber-reinforced polymer composites. J. Constr. Steel Res. 78, 131–143 (2012)CrossRef
64.
Teutenberg, D., Meschut, G., Schlimmer, M., Kroll, U., Matzenmiller, A.: Testing, Material Data And Identification Of Model Parameters For Toughened Structural Adhesives (2013)
65.
Tvergaard, V., Hutchinson, J.W.: The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J. Mech. Phys. Solids 40(6), 1377–1397 (1992)CrossRef
66.
Ucsnik, S., Scheerer, M., Zaremba, S., Pahr, D.H.: Experimental investigation of a novel hybrid metal–composite joining technology. Compos. Part A Appl. S. 41(3), 369–374 (2010)
67.
Valoroso, N., Champaney, L.: A damage-mechanics-based approach for modelling decohesion in adhesively bonded assemblies. Eng. Fract. Mech. 73(18), 2774–2801 (2006)CrossRef
68.
Valoroso, N., Fedele, R.: Characterization of a cohesive-zone model describing damage and de-cohesion at bonded interfaces. Sensitivity analysis and mode-I parameter identification. Int. J. Solids Struct. 47(13), 1666–1677 (2010)CrossRef
69.
van der Sluis, O., Schreurs, P.J.G., Brekelmans, W.A.M., Meijer, H.E.H.: Overall behaviour of heterogeneous elastoviscoplastic materials: Effect of microstructural modelling. Mech. Mater. 32, 449–462 (2000)CrossRef
70.
Xu, X.P., Needleman, A.: Void nucleation by inclusion debonding in a crystal matrix. Modell. Simul. Mater. Sci. Eng. 1(2), 111 (1993)CrossRef
71.
Yukimoto, Y., Matsuzaki, R., Todoroki, A.: Mode II interfacial fracture toughness of composite/adhesive interfaces obtained by in-mold surface modification. Int. J. Adhes. Adhes. 50, 191–198 (2014)CrossRef
72.
Yves Cognard, J., Sohier, L., Créac’hcadec, R., Lavelle, F., Lidon, N.: Influence of the geometry of coaxial adhesive joints on the transmitted load under tensile and compression loads. Int. J. Adhes. Adhes. 37, 37–49 (2012)
73.
Zhao, X.L., Zhang, L.: State-of-the-art review on frp strengthened steel structures. Eng. Struct. 29, 1808–1823 (2007)CrossRef
Metadata
Title
On the Design, Characterization and Simulation of Hybrid Metal-Composite Interfaces
Authors
R. Kießling
J. Ihlemann
M. Pohl
M. Stommel
C. Dammann
R. Mahnken
M. Bobbert
G. Meschut
F. Hirsch
M. Kästner
Publication date
14-09-2016
Publisher
Springer Netherlands
Published in
Applied Composite Materials / Issue 1/2017
Print ISSN: 0929-189X
Electronic ISSN: 1573-4897
DOI
https://doi.org/10.1007/s10443-016-9526-z

Other articles of this Issue 1/2017

Applied Composite Materials 1/2017 Go to the issue

OriginalPaper

Material Models Used to Predict Spring-in of Composite Elements: a Comparative Study

OriginalPaper

Thermoelasticity of a Fabric Membrane Composite for the Stratospheric Airship Envelope Based on Multiscale Models

OriginalPaper

Stability of Three-Layered Annular Plate with Composite Facings

OriginalPaper

A Modeling Approach to Fiber Fracture in Melt Impregnation

OriginalPaper

Influence of Sea Water Aging on the Mechanical Behaviour of Acrylic Matrix Composites

OriginalPaper

A New Approach for Quantitative Evaluation of Ultrasonic Wave Attenuation in Composites

Premium Partners

    Image Credits