Top

Journal of Materials Engineering and Performance

Published in:

11-01-2017

On the High Temperature Deformation Behaviour of 2507 Super Duplex Stainless Steel

Authors: M. K. Mishra, I. Balasundar, A. G. Rao, B. P. Kashyap, N. Prabhu

Published in: Journal of Materials Engineering and Performance | Issue 2/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

High temperature deformation behaviour of 2507 super duplex stainless steel was investigated by conducting isothermal hot compression tests. The dominant restoration processes in ferrite and austenite phases present in the material were found to be distinct. The possible causes for these differences are discussed. Based on the dynamic materials model, processing map was developed to identify the optimum processing parameters. The microstructural mechanisms operating in the material were identified. A unified strain-compensated constitutive equation was established to describe the high temperature deformation behaviour of the material under the identified processing conditions. Standard statistical parameter such as correlation coefficient has been used to validate the established equation.

previous article Influence of Metal-Coated Graphite Powders on Microstructure and Properties of the Bronze-Matrix/Graphite Composites

next article Effects of Laser Shock Processing on Fatigue Crack Growth in Ti-17 Titanium Alloy

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

S. Byun, N. Kang, T. Lee, S. Ahn, H.W. Lee, W. Chang, and K. Cho, Kinetics of Cr/Mo-Rich Precipitates Formation for 25Cr-6.9Ni-3.8Mo-0.3N Super Duplex Stainless Steel, Met. Mater. Int., 2012, 18, p 201–207CrossRef

J. Nilsson, Overview Super Duplex Stainless Steels, Mater. Sci. Technol., 1992, 8, p 685–700CrossRef

B. Deng, Z. Wang, Y. Jiang, H. Wang, J. Gao, and J. Li, Evaluation of Localized Corrosion in Duplex Stainless Steel Aged at 850°C with Critical Pitting Temperature Measurement, Electrochim. Acta, 2009, 54, p 2790–2794CrossRef

Z.J. Bin, Y.D. Mei, N.S. Rui, and J.G. Shun, Flow Behavior of 430 Ferritic Stainless Steel at Elevated Temperatures, Adv. Mater. Res., 2013, 721, p 77–81CrossRef

F. Gao, Z. Liu, R.D.K. Misra, H. Liu, and F. Yu, Constitutive Modeling and Dynamic Softening Mechanism During Hot Deformation of an Ultra-Pure 17% Cr Ferritic Stainless Steel Stabilized with Nb, Met. Mater. Int., 2014, 20, p 939–951CrossRef

S.V. Mehtonen, L.P. Karjalainen, and D.A. Porter, Modeling of the High Temperature Flow Behavior of Stabilized 12–27 wt% Cr Ferritic Stainless Steels, Mater. Sci. Eng. A, 2014, 607, p 44–52CrossRef

A. Marchattiwar, A. Sarkar, J.K. Chakravartty, and B.P. Kashyap, Dynamic recrystallization During Hot Deformation of 304 Austenitic Stainless Steel, J. Mater. Eng. Perform., 2013, 22, p 2168–2175

A. Mirzaei, A. Zarei-Hanzaki, M.H. Pishbin, A. Imandoust, and S. Khoddam, Evaluating the Hot Deformation Behavior of a Super-Austenitic Steel Through Microstructural and Neural Network Analysis, J. Mater. Eng. Perform., 2015, 24, p 2412–2421CrossRef

L. Duprez, B.C.D. Cooman, and N. Akdut, Flow Stress and Ductility Of Duplex Stainless Steel During High-Temperature Torsion Deformation, Metall. Mater. Trans. A, 2002, 33, p 1931–1938CrossRef

10.

B. Mirzakhani, M.T. Salehi, S. Khoddam, S.H. Seyedein, and M.R. Aboutalebi, Investigation of Dynamic and Static Recrystallization Behavior During Thermomechanical Processing in a API-X70 Microalloyed Steel, J. Mater. Eng. Perform., 2009, 18, p 1029–1034CrossRef

11.

A. Momeni, S. Kazemi, and A. Bahrani, Hot Deformation Behavior of Microstructural Constituents in a Duplex Stainless Steel During High-Temperature Straining, Int. J. Miner. Metall. Mater., 2013, 20, p 953–960CrossRef

12.

P. Mao, K. Yang, and G. Su, Hot Deformation Behavior of an As-cast Duplex Stainless Steel, J. Mater. Sci. Technol., 2003, 19, p 379–381

13.

L. Chen, X. Ma, X. Liu, and L. Wang, Processing Map for Hot Working Characteristics of a Wrought 2205 Duplex Stainless Steel, Mater. Des., 2011, 32, p 1292–1297CrossRef

14.

D. Zou, K. Wu, Y. Han, W. Zhang, B. Cheng, and G. Qiao, Deformation Characteristic and Prediction of Flow Stress for As-cast 21Cr Economical Duplex Stainless Steel Under Hot Compression, Mater. Des., 2013, 51, p 975–982CrossRef

15.

G.W. Fan, J. Liu, P.D. Han, and G.J. Qiao, Hot Ductility and Microstructure in Casted 2205 Duplex Stainless Steels, Mater. Sci. Eng. A, 2009, 515, p 108–112CrossRef

16.

P.V. Sivaprasad, S. Venugopal, S. Venugopal, V. Maduraimuthu, M. Vasudevan, S.L. Mannan, Y.V.R.K. Prasad, and R.C. Chaturvedi, Validation of Processing Maps for a 15Cr-15Ni-2.2Mo-0.3 Ti Austenitic Stainless Steel Using Hot Forging and Rolling Tests, J. Mater. Process. Technol., 2003, 132, p 262–268CrossRef

17.

S.V.S.N. Murty, B.N. Rao, and B.P. Kashyap, Identification of Flow Instabilities in the Processing Maps of AISI, 304 Stainless Steel, J. Mater. Process. Technol., 2005, 166, p 268–278CrossRef

18.

X. Ma, Z. An, L. Chen, T. Mao, J. Wang, H. Long, and X. Hongyan, The Effect of Rare Earth Alloying on the Hot Workability of Duplex Stainless Steel—A Study Using Processing Map, Mater. Des., 2015, 86, p 848–854

19.

Y.V.R.K. Prasad and S. Sasidhara, Hot Working Guide—A Compendium Of Processing Maps, ASM Int, Ohio, 1997

20.

A.K. Kalyan Kumar, Criteria for Predicting Metallurgical Instabilities in Processing, M.S. thesis, Department of Metallurgy, Indian Institute of Science, Bangalore, 1987

21.

H. Ziegler, Progress in Solid Mechanics, Vol 4, Wiley, Hoboken, 1965, p 91–193

22.

Y.C. Lin and X.M. Chen, A Critical Review of Experimental Results and Constitutive Descriptions for Metals and Alloys in Hot Working, Mater. Des., 2011, 32, p 1733–1759CrossRef

23.

Y.C. Lin, D.X. Wen, J. Deng, G. Liu, and J. Chen, Constitutive Models for High-Temperature Flow Behaviors of a Ni-Based Superalloy, Mater. Des., 2014, 59, p 115–123CrossRef

24.

Y.C. Lin, K.K. Li, H.B. Li, J. Chen, X.M. Chen, and D.X. Wen, New Constitutive Model for High-Temperature Deformation Behavior of Inconel 718 Superalloy, Mater. Des., 2015, 74, p 108–118CrossRef

25.

C.M. Sellars and W.J. McG, Tegart, on the Mechanism of Hot Deformation, Acta Metall., 1966, 14, p 1136–1138CrossRef

26.

C.M. Sellars and W.J. McG, Tegart, Hot Workability, Int. Metall. Rev., 1972, 17, p 1–24

27.

H.J. Mcqueen and N.D. Ryan, Constitutive Analysis in Hot Working, Mater. Sci. Eng. A, 2002, 322, p 43–53CrossRef

28.

I. Balasundar, T. Raghu, and B.P. Kashyap, Modeling the Hot Working Behavior of Near-α Titanium Alloy IMI, 834, Prog. Nat. Sci. Mater. Inter., 2013, 23, p 598–607CrossRef

29.

T. Siegmund, E. Werner, and F.D. Fischer, On the Thermomechanical Deformation Behaviour of Duplex-Type Materials, J. Mech. Phys. Solids, 1995, 43, p 495–532CrossRef

30.

A. Vorhauer and R. Pippan, On the Onset of a Steady State in Body-Centered Cubic Iron During Severe Plastic Deformation at Low Homologous Temperatures, Metall. Mater. Trans. A, 2008, 39, p 417–429CrossRef

31.

M. Ma, H. Ding, Z. Tang, J. Zhao, Z. Jiang, and G. Fan, Effects of Temperature and Strain Rate on Flow Behavior and Microstructural Evolution of Super Duplex Stainless Steel Under Hot Deformation, J. Iron Steel Res. Int., 2016, 23, p 244–252CrossRef

32.

A. Iza-Mendeia, A. Pinol-Juez, J.J. Urcola, and I. Gutiérrez, Microstructural and Mechanical Behavior of a Duplex Stainless Steel Under Hot Working Conditions, Metall. Mater. Trans. A, 1998, 29, p 2975–2986CrossRef

33.

S. Mandal, V. Rakesh, P.V. Sivaprasad, S. Venugopal, and K.V. Kasiviswanathan, Constitutive Equations to Predict High Temperature Flow Stress in a Ti-Modified Austenitic Stainless Steel, Mater. Sci. Eng. A, 2009, 500, p 114–121CrossRef

Title: On the High Temperature Deformation Behaviour of 2507 Super Duplex Stainless Steel
Authors: M. K. Mishra
I. Balasundar
A. G. Rao
B. P. Kashyap
N. Prabhu
Publication date: 11-01-2017
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 2/2017
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2508-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2017

Growth Kinetics and Microstructure Evolution of Intermediate Phases in MoSi2-Si3N4-WSi2/Mo Diffusion Couples

Effect of Post-weld Heat Treatment on the Mechanical Properties of Supermartensitic Stainless Steel Deposit

Effect of Spheroidizing Annealing on Microstructure and Mechanical Properties of High-Carbon Martensitic Stainless Steel 8Cr13MoV

Friction Reduction of Chrome-Coated Surface with Micro-Dimple Arrays Generated by Electrochemical Micromachining

Molten Pool Behavior and Mechanical Properties of Pulsed Current Double-Sided Synchronization GTA Welded Fe-18Cr-17Mn-Ni-N

Isothermal Transformation of a Commercial Super-Bainitic Steel: Part I Microstructural Characterization and Hardness

Premium Partners