Top

Polymer Science, Series D

Published in:

01-03-2023

Physical and Mechanical Properties of Filled Nanocomposites Based on Thermoplastic Copolymers of Ethylene with α-Olefins

Authors: Kh. V. Allahverdieva, N. T. Kakhramanov, R. Sh. Gadzhieva, A. A. Shukyurova

Published in: Polymer Science, Series D | Issue 1/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The results of a study of the influence of the concentration of various types of fillers at the nanoscale level (zinc stearate, aluminum, carbon black) on the physical and mechanical properties of nanocomposites based on copolymers of ethylene with α-olefins are presented. The copolymers used were ethylene–propylene random copolymer (random polypropylene), ethylene–propylene block copolymer, and ethylene–hexene copolymer. In order to improve the compatibility of polyolefins with fillers, a copolymer of high-density polyethylene with maleic anhydride was used as a compatibilizer. It has been established that the use of a compatibilizer contributes to a significant improvement in the basic physical and mechanical characteristics of nanocomposites, which indicates technological compatibility of the mixed components of the mixture with the polymer matrix.

previous article Review of Methods for Creating Orderly Reinforced Composites Based on Thermoplastic Polymers

next article A Comparative Assessment of the Influence of Modification with Thermoplastic Powders on the Residual Compressive Strength of the Carbon Fiber Reinforced Polymers

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. A. Berlin, S. A. Volfson, and V. G. Oshman, Principles of Creating Composite Materials (Khimiya, Moscow, 1990) [in Russian].

N. T. Kakhramanov, A. G. Azizov, V. S. Osipchik, U. M. Mamedli, and Kh. B. Arzumanova, “Nanostructured composites and polymer materials,” Int. Polym. Sci. Technol. 44, 37–47 (2017).CrossRef

D. L. Starokodomskii, “Physical-mechanical properties and micro-nanostructure of epoxy composites filled with gypsum, chalk, and cement,” Kompoz. Nanostrukt. 10, 39–51 (2018).

N. B. Arzumanova and N. T. Kakhramanov, Polymeric Nanocomposites (Azeri, Sumgait, 2020) [in Russian].

S. M. Terekhina, G. V. Malysheva, N. R. Ashurov, V. V. Dolgov, Sh. G. Sadykov, and M. M. Usmanova, Nanocomposites Ethylene Polymers Filled with Layered Aluminosilicates (Fan, Tashkent, 2016) [in Russian].

I. M. Bulanov and T. V. Tarasova, “Investigation of tribologigical properties of polymer composite materials based on bismaleimide binder,” Polym. Sci., Ser. D 4, 136–137 (2011).

V. Z. Aloev, Z. M. Zhirikova, and M. A. Tarchokova, “The efficiency of using nanofillers of different types in polymer composites, Izv. Vyssh. Uchebn. Zaved., Khimiya Khim. Tekhnol. 63, 81–85 (2020).

L. B. Atlukhanova, G. V. Kozlov, and I. V. Dolbin, “The correlation between the nanofiller structure and the properties of polymer nanocomposites: Fractal model,” Inorg. Mater.: Appl. Res. 11, 188–191. https://doi.org/10.31044/1684-579Kh-2019-0-7-19-22

Kh. V. Allahverdiyeva, N. T. Kakhramanov, and U. V. Namazly, “Thermomechanical properties of composites based on high density polyethylene and aluminum,” Polym. Sci., Ser. D 14, 598–602 (2021).

10.

Kh. V. Allahverdiyeva, N. T. Kakhramanov, and I. A. Ismailov, “Physicomechanical properties of composites based on various types of polyethylene and aluminum,” Inorg. Mater.: Appl. Res. 12, 477–481 (2021).CrossRef

11.

L. F. Kalistratova and V. A. Egorova, “Ordering of the amorphous phase as one of the characteristics of supramolecular structure of amorphous-crystalline polymer,” Inorg. Mater.: Appl. Res. 10, 933–938 (2019).CrossRef

12.

Yu. M. Evtushenko, T. A. Rudakova, Yu. A. Grigoryev, and A.N. Ozerin, “Low pressure polyethylene modified with organomontmorillonite,” Vse Mater. Entsiklopedicheskii Spravochnik, No. 8, 12–16 (2018). https://doi.org/10.31044/1994-6260-2018-0-8-12-16

13.

N. T. Kakhramanov, A. D. Ismailzade, N. B. Arzumanova, U. M. Mammadli, and Q. S. Martinova, “Filled composites based on polyolefins and clinoptilolite,” Am. Scientific J., No. 4, 60–65 (2016).

14.

N. T. Kakhramanov, Kh. V. Allahverdiyeva, and U. V. Namazly, “Mechanism and kinetics of stepwise crystallization of composites based on high density polyethylene and aluminum,” Vse Mater. Entsiklopedicheskii Spravochnik, No. 12, 2–7 (2020).

15.

G. V. Kozlov and I. V. Dolbin, “The transfer of mechanical stress from the polymer matrix to the nanofiller in particulate-filled,” Materialoved., No. 8, 23–28 (2018). https://doi.org/10.31044/1684-579X-2018-0-8-23-27CrossRef

16.

N. F. Mainikova, A. Yu. Yarmizina, D. V. Trofimov, and N. V. Kostromina, “Study of the effect of carbon nanofillers on the properties of composites based on polypropylene,” Plast. Massy, Nos. 3–4, 23–25 (2020).CrossRef

Title: Physical and Mechanical Properties of Filled Nanocomposites Based on Thermoplastic Copolymers of Ethylene with α-Olefins
Authors: Kh. V. Allahverdieva
N. T. Kakhramanov
R. Sh. Gadzhieva
A. A. Shukyurova
Publication date: 01-03-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 1/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223010033

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2023

Influence of DSC Thermogram Processing Methods on the Results of Calculation of Kinetic Parameters of the Curing Reaction of a Thermoreactive Binder

High-Temperature Thermodestruction Analysis of a Polyphenylene-Sulfide-Based Composite by Thermogravimetry

Review of Methods for Creating Orderly Reinforced Composites Based on Thermoplastic Polymers

A Review of Modern Adhesive Materials Operating in a Wide Temperature Range. Epoxy Adhesives

Mechanical Characteristics of Compositions Based on Polyethylene and Polylactide under the Action of Aggressive Environmental Factors

Waterproof Plywood Based on Aminoformaldehyde Resin of AFK-8 Brand

Premium Partners