Top

Mechanics of Composite Materials

Published in:

19-09-2022

Predicting the Degradation of the Residual Strength in Cyclic Loading of Layered Composites

Author: V. Strizhius

Published in: Mechanics of Composite Materials | Issue 4/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A brief overview and analysis of three well-known degradation models of the residual strength of layered composites are presented: the Schaff and Davidson model, the model of degradation of normalized strength, and the model of progressive fatigue damage. The conclusion is made about the expediency of forming a new, special model in order to obtain engineering estimates of an acceptable accuracy and labor consumption for the residual strength of layered composites during cyclic loadings. The basic relations of such a model are proposed, which were verified using an example of calculated estimates for the residual strength of samples with an open hole made of an AS4/3501-6 [0/±45/90]_s4 carbon-fiber plastic. The results found by the model proposed, the normalized strength degradation model, and the progressive fatigue damage model are compared.

previous article Deformation Mechanics of Fiber-Reinforced Plastic Specimens with a [±45] Lay-Up in Tensile and Compression Tests 2. Investigation of Flat Internal Buckling Modes

next article Recycling of Fiberglass Fillers Obtained from Polymer Composites Based on an Epoxy Vinyl Ester Binder

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Composite Aircraft Structure. Advisory Circular No: 20-107B. U.S. Department of Transportation. Federal Aviation Administration. URL: http://www1.airweb.faa.gov/Requlatory_and_Guidence_Library/rgAdvisoryCircular.nsf (21.01.2022)

J. R. Schaff and B. D. Davidson, “A life prediction methodology for composite structures. Part I: Constant amplitude and two stress level fatigue loading; Part II: Spectrum fatigue loading,” J. Compos. Materials, 31, No. 2, 128-181 (1997).CrossRef

N. L. Post, J. J. Lesko, and S. W. Case, “Residual strength fatigue theories for composite materials,” Fatigue life prediction of composites and composite structures, Ed. by Anastasios P. Vassilopoulos. - Woodhead Publ. Ltd and CRC Press LLC (2010).

T. Adam, R. F. Dickson, G. Fernando, B. Harris, and H. Reiter, “The fatigue behavior of Kevlar/carbon hybrid composites,” IMechE Conf. Publ. (Institute of Mechanical Engineers), 2, 329-335 (1986).

T. Adam, R. F. Dickson, C. J. Jones, H. Reiter, and B. Harris, “A power law fatigue damage model for fiber-reinforced plastic laminates,” Proc. Institution Mech. Eng. Part C: Mech. Eng. Sci., 200, 155-166 (1986).CrossRef

B. Harris, “A historical review of the fatigue behavior of fiber-reinforced plastics,” Fatigue in Composites, Ed. by Bryan Harris, Woodhead Publ. Ltd and CRC Press LLC (2003).

M. M. Shokrieh and L. B. Lessard, “Fatigue under multiaxial stress systems,” Fatigue in Composites, Ed. by Bryan Harris, Woodhead Publ. Ltd and CRC Press LLC (2003).

J. F. Mandell, “Fatigue behaviour of fibre-resin composites,” Developments in Reinforced Plastics 2 Ed. G. Pritchard, London: Appl. Sci. Publ., 67-108 (1986).

K. Reifsnider, Durability and Damage Tolerance of Fibrous Composite Systems,” Handbook of Composites, Ed. by S. T. Peters, London: Chapman & Hall (1998).

10.

ASM Handbook. Vol. 21. Composites (The Volume was prepared under the direction of the ASM Int. Handbook Committee, 2001).

11.

R. P. L. Nijssen, Phenomenological Fatigue Analysis and Life Modelling, Fatigue Life Prediction of Composites and Composite Structures, Ed. by Anastasios P. Vassilopoulos, Woodhead Publ. Ltd and CRC Press LLC (2010).

12.

A. P. Vassilopoulos and T. Keller, Fatigue of Fiber-Reinforced Composites, London: Springer-Verlag Ltd (2011).

13.

I. Burhan and H. S. Kim, “S-N curve models for composite materials characterisation: An evaluative review,” J. Compos. Sci., 2, No. 38 (2018). DOI: https://doi.org/10.3390/JCS2030038

14.

V. Strizhius, “Fatigue life prediction of CFRP laminate under quasi-random loading,” 30th Symp. Int. Committee on Aeronautical Fatigue, ICAF 2019, Krakow, Poland, June 2-7 2019, Proceedings, Krakow (2019).

15.

V. E. Strizhius, “Fatigue life prediction of laminated composites using normalized S-N data,” Mater. Sci. Power Eng., 26, No. 3, 20-32 (2020). DOI: https://doi.org/10.18721/JEST.26302CrossRef

16.

H. T. Han and S. W. Choi, “The Effect of Loading Parameters on Fatigue of Composite Laminates: Part V. Report DOT/FAA/AR-01/24, June 2001.

17.

A. I. Khan, S. Venkataraman, and I. Miller, “Predicting fatigue damage of composites using strength degradation and cumulative damage model,” J. Compos. Sci., 2 (2018). DOI: https://doi.org/10.3390/JCS2010009

18.

V. E. Strizhius , “Calculation of equivalent stresses and equivalents of fatigue testing programs for elements of composite aircraft structures,” Nauch. Vestn. MSTU GA, 23, No. 2, 87-100 (2020). https://doi.org/https://doi.org/10.26467/2079-0619-2020-23-2-87-100

19.

J. G. Bakuckas Jr., R. Chadha, P. Swindell, M. Fleming, J. Z. Lin, J. B. Ihn, N. Desai, E. Espinar-Mick, and M. Freisthler, “Bonded repairs of composite panels representative of wing structure,” Proc. 30th Symp. Int. Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland, 565-580 (2019).

Title: Predicting the Degradation of the Residual Strength in Cyclic Loading of Layered Composites
Author: V. Strizhius
Publication date: 19-09-2022
Publisher: Springer US
Published in: Mechanics of Composite Materials / Issue 4/2022
Print ISSN: 0191-5665
Electronic ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-022-10047-w

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2022

Finite-Element Analysis of RC Beams Strengthened With CFRP U-Wraps

Deformation Mechanics of Fiber-Reinforced Plastic Specimens with a [±45] Lay-Up in Tensile and Compression Tests 2. Investigation of Flat Internal Buckling Modes

Recycling of Fiberglass Fillers Obtained from Polymer Composites Based on an Epoxy Vinyl Ester Binder

Investigating the Instability of Parametric Vibrations of Composite Plates under Arbitrary Pulsating Loads Based on High-Order Plate Theories

Simulation of Crumpling in Composite Materials via Computational Micromechanics

Lagrangian Formalism for the Analysis of Acoustic Properties of Two-Phase Composite Materials with Damaged Interfaces

Premium Partners