Top

Progress in Additive Manufacturing

Published in:

19-04-2018 | Full Research Article

Process limitations of 3D printing model rock

Authors: Kevin J. Hodder, John A. Nychka, Rick J. Chalaturnyk

Published in: Progress in Additive Manufacturing | Issue 3/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A 3D binder jet printer was used to fabricate model sandstone with increasing amounts of binder volume fraction. The model sandstone was compared to natural sandstone via microscopic imaging and the morphology and binding features between sand grains was contrasted. It was observed that unconfined compressive strength of the model samples increased with binder volume fraction, but dimensional control was sacrificed. Such results indicate that there is a limited processing window of binder content which can be adjusted to tailor the mechanical response of additively manufactured model sandstone.

previous article Contribution of printing parameters to the interfacial strength of polylactic acid (PLA) in material extrusion additive manufacturing

next article A comparative study of microstructure and high-temperature mechanical properties of 15-5 PH stainless steel processed via additive manufacturing and traditional manufacturing

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Broch E, Franklin JA (1972) The point-load strength test. Int J Rock Mech Min Sci 9:669–676. https://doi.org/10.1016/0148-9062(72)90030-7 CrossRef

Pincus HJ (1993) Interlaboratory testing program for rock properties, round one—longitudinal and transverse pulse velocities, unconfined compressive strength, uniaxial modulus, and splitting tensile strength. Geotech Test J 16:138–163CrossRef

Pincus HJ (1994) Addendum to interlaboratory testing program for rock properties, round one. Geotech Test J 17:256–258CrossRef

Potyondy DO, Cundall Pa (2004) A bonded-particle model for rock. Int J Rock Mech Min Sci 41:1329–1364. https://doi.org/10.1016/j.ijrmms.2004.09.011 CrossRef

Jiang MJ, Yan HB, Zhu HH, Utili S (2011) Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses. Comput Geotech 38:14–29. https://doi.org/10.1016/j.compgeo.2010.09.001 CrossRef

Hanaor DAH, Gan Y, Revay M, Airey DW, Einav I (2015) 3D printable geomaterials, Géotechnique. https://doi.org/10.1680/jgeot.15.P.034

Jiang Q, Feng X, Song L, Gong Y, Zheng H, Cui J (2016) Modeling rock specimens through 3D printing: tentative experiments and prospects. Acta Mech Sin 32:101–111. https://doi.org/10.1007/s10409-015-0524-4 CrossRef

Osinga S, Zambrano-Narvaez G, Chalaturnyk R (2015) Study of geomechanical properties of 3D printed sandstone analogue. In: Proc. from Am. Rock Mech. Assoc., pp 15–547

McKillip JW (1989) Chemistry of furan polymers. Adhes. from Renew. Resour. 408–423. https://doi.org/10.1021/bk-1989-0385.ch029

10.

Hussein NIS, Ayof MN, Mohamed Sokri NI (2013) Mechanical properties and loss on ignition of phenolic and furan resin bonded sand casting. Int J Min Metall Mech Eng 1(3):223–227

11.

Choura M, Belgacem NM, Gandini A (1996) Acid-catalyzed polycondensation of furfuryl alcohol: mechanisms of chromophore formation and cross-linking. Macromolecules 29:3839–3850. https://doi.org/10.1021/ma951522f CrossRef

12.

Wallon SB, Barr B, Petro A (1971) A study of furfuryl alcohol resin components by gel permeation chromatography. J Chromatogr 54:33–41CrossRef

13.

Gandini A, Belgacem M (1996) In: Salamone J (ed) The polymeric materials encyclopedia, vol 1. CRC Press

14.

Astm D-08 (2008) Standard test method for splitting tensile strength of intact rock core specimens 1. ASTM Int., West Conshohocken, pp 20–23. https://doi.org/10.1520/D3967-08.2

15.

Ma L, Daemen JJK (2006) Strain rate dependent strength and stress-strain characteristics of a welded tuff. Bull Eng Geol Environ 65:221–230. https://doi.org/10.1007/s10064-005-0038-6 CrossRef

16.

National Institute for Occupational Safety and Health (1979) Occupational Exposure to Furfuryl Alcohol. U.S. Department of Health, Education and Welfare. http://www.cdc.gov/niosh/pdfs/79-133a.pdf. Accessed 16 Nov 2016

17.

Rathi A, Chanda M (1974) Kinetics of solution polymerisation of Furfuryl Alcohol. Appl Polym 18:1541–1548CrossRef

18.

Wewerka EM (1968) Investigation of the Polymerization of Furfuryl Alcohol with gel permeation chromatography. J Appl Poly Sci 12:1671–1681CrossRef

19.

Muthukumar M, Mohan D (2005) Studies on furan polymer concrete. J Polym Res 12:231–241. https://doi.org/10.1007/s10965-004-3206-7 CrossRef

20.

Muthukumar M, Mohan D, Rajendran M (2003) Optimization of mix proportions of mineral aggregates using Box Behnken design of experiments. Cem Concr Compos 25:751–758. https://doi.org/10.1016/S0958-9465(02)00116-6 CrossRef

21.

Gandini A (1992) Comprehensive polymer science. Pergamon Press, Oxford

22.

Gandini A (1977) The behaviour of furan derivatives in polymerization reactions. Polym Chem 25:47–96CrossRef

23.

McKillip W (1989) Chemistry of furan polymers. In: ACS Symp. Ser., pp 408–423

24.

Schmitt CR (1974) Polyfuryl Alcohol Resins. Polym-Plast Technol Eng 3:121CrossRef

25.

Maciel GE, Chuang IS, Myers GE (1984) Carbon-13 NMR study of curing in furfuryl alcohol resins. Macromolecules 17:1087–1090CrossRef

26.

Dunlop A, Peters F (1953) The furans. Reinhold Publishing Corp., New York

27.

Deer WA, Howie RA, Zussman J (1966) An introduction to the rock forming minerals, 14th edn., Longman, London

28.

Lide DR (2005) CRC handbook of chemistry and physics, 86th edn. CRC Press, Taylor and Francis Group, Boca Raton

29.

Kwasniewski, Li, Research S (2012) Manabu, takahashi, true triaxial testing of rocks. CRC Press, Taylor and Francis Group

30.

Guigo N, Mija A, Vincent L, Sbirrazzuoli N (2007) Chemorheological analysis and model-free kinetics of acid catalysed furfuryl alcohol polymerization. Phys Chem Chem Phys 9:5359–5366. https://doi.org/10.1039/b707950h CrossRef

Title: Process limitations of 3D printing model rock
Authors: Kevin J. Hodder
John A. Nychka
Rick J. Chalaturnyk
Publication date: 19-04-2018
Publisher: Springer International Publishing
Published in: Progress in Additive Manufacturing / Issue 3/2018
Print ISSN: 2363-9512
Electronic ISSN: 2363-9520
DOI: https://doi.org/10.1007/s40964-018-0042-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2018

Contribution of printing parameters to the interfacial strength of polylactic acid (PLA) in material extrusion additive manufacturing

Using finite element analysis to influence the infill design of fused deposition modelled parts

Modeling and prediction of optimal process parameters in wear behaviour of selective inhibition sintered high density polyethylene parts

Characterizing the effects of additive manufacturing process settings on part performance using approximation-assisted multi-objective optimization

A comparative study of microstructure and high-temperature mechanical properties of 15-5 PH stainless steel processed via additive manufacturing and traditional manufacturing

Premium Partners