Top

Journal of Intelligent Manufacturing

Published in:

15-05-2018

Product quality in an inclusive manufacturing system: some considerations

Authors: Vedpal Arya, S. G. Deshmukh, Naresh Bhatnagar

Published in: Journal of Intelligent Manufacturing | Issue 8/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In our technology-intensive world, manufacturing is transforming rapidly and is now driven by personalized demand. To deal with the modern manufacturing challenges, one requires an inclusive approach and therefore, a new paradigm has evolved shifting the manufacturing closer to the customer. This paper highlights the need for inclusive manufacturing along with its important aspects of automation, workforce diversity, and environment-friendly manufacturing operations. Variables pertaining to an inclusive manufacturing system were identified from the literature and were shortlisted based on the opinion of domain specialists. The causal relations among the variables are modeled using Bayesian network. The overall focus of the study lies in evaluating the impact of identified variables affecting product quality through the lens of an inclusive manufacturing system. Cascading effect of variables and the sensitivity analysis further build this study to conclude important observations and managerial insights.

previous article Industrial wearable system: the human-centric empowering technology in Industry 4.0

next article Graduation manufacturing system: synchronization with IoT-enabled smart tickets

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Al-Najjar, B., & Alsyouf, I. (2000). Improving effectiveness of manufacturing systems using total quality maintenance. Integrated Manufacturing Systems, 11(4), 267–276. https://doi.org/10.1108/09576060010326393.CrossRef

Arya, V. (2017). Value addition models for medical device supply chain. Unpublished PhD Thesis. Indian Institute of Technology (IIT) Delhi, India.

Badurdeen, F., & Jawahir, I. S. (2017). Strategies for value creation through sustainable manufacturing. Procedia Manufacturing, 8, 20–27. https://doi.org/10.1016/j.promfg.2017.02.002.CrossRef

Bantel, K. A., & Jackson, S. E. (1989). Top management and innovation in banking: Does the composition of the top management make a difference. Strategic Management Journal, 10(S1), 107–124. https://doi.org/10.1002/smj.4250100709.CrossRef

Beck, M., & Wicki, A. S. (2014). Cooperating with external partners: the importance of diversity for innovation performance. European Journal of International Management, 8(5), 548–569. https://doi.org/10.1504/EJIM.2014.064604.CrossRef

Bezrukova, K., & Spell, C. S. (2012). Reviewing diversity training: Where we have been and where we should go. Academy of Management Learning and Education, 11(2), 207–227. https://doi.org/10.5465/amle.2008.0090.CrossRef

Brown, A., Eatock, J., Dixon, D., Meenan, B. J., & Anderson, J. (2008). Quality and continuous improvement in medical device manufacturing. The TQM Journal, 20(6), 541–555. https://doi.org/10.1108/17542730810909329.CrossRef

Brundtland, G. H. (1987). Our common future: Report of the World Commission on Environment and Development. United Nations Commission. Retrieved from http://www.un-documents.net/our-common-future.pdf.

Campos, J., Sharma, P., Jantunen, E., Baglee, D., & Fumagalli, L. (2016). The challenges of cybersecurity frameworks to protect data required for the development of advanced maintenance. Procedia CIRP, 47, 222–227. https://doi.org/10.1016/j.procir.2016.03.059.CrossRef

Chatman, J. A., Polzer, J. T., Barsade, S. G., Margaret, A., Chatman, J. A., Polzer, J. T., et al. (1998). Being different yet feeling similar? The influence of demographic composition and organizational culture on work processes and outcomes. Administrative Science Quarterly, 43(4), 749–780.CrossRef

Chavaillaz, A., Wastell, D., & Sauer, J. (2016a). Effects of extended lay-off periods on performance and operator trust under adaptable automation. Applied Ergonomics, 53, 241–251. https://doi.org/10.1016/j.apergo.2015.10.006.CrossRef

Chavaillaz, A., Wastell, D., & Sauer, J. (2016b). System reliability, performance and trust in adaptable automation. Applied Ergonomics, 52, 333–342. https://doi.org/10.1016/j.apergo.2015.07.012.CrossRef

Chen, Y. S., Cheng, C. H., & Lai, C. J. (2010). A hybrid procedure for extracting rules of production performance in the automobile parts industry. Journal of Intelligent Manufacturing, 21(4), 423–437. https://doi.org/10.1007/s10845-008-0190-5.CrossRef

Cheng, J., Bell, D. A., & Liu, W. (1997). An algorithm for Bayesian belief network construction from data. In Proceedings of AI & STAT’97 (pp. 83–90). Retrieved from http://pdf.aminer.org/000/306/189/the_use_of_information_theory_in_the_construction_of_a.pdf.

D’Netto, B., Shen, J., Chelliah, J., & Monga, M. (2014). Human resource diversity management practices in the Australian manufacturing sector. International Journal of Human Resource Management, 25(9), 1243–1266. https://doi.org/10.1080/09585192.2013.826714.CrossRef

D ’netto, B., & Sohal, A. S. (1999). Human resource practices and workforce diversity: An empirical assessment. International Journal of Manpower, 20(8), 530–547. https://doi.org/10.1108/01437729910302723.CrossRef

Darwiche, A. (2009). Modeling and reasoning with bayesian networks. Wiley Interdisciplinary Reviews Computational Statistics (Vol. 1). Cambridge: Cambridge University Press. https://doi.org/10.1002/wics.48.CrossRef

Despeisse, M., Mbaye, F., Ball, P. D., & Levers, A. (2012). The emergence of sustainable manufacturing practices. Production Planning and Control, 23(5), 354–376. https://doi.org/10.1080/09537287.2011.555425.CrossRef

Devarajan, V. (2017). Hyper-personalized manufacturing can drive inclusive growth—Here is how. Retrieved December 10, 2017, from https://www.weforum.org/agenda/2017/06/hyper-personalised-manufacturing-can-drive-inclusive-growth-heres-how.

Donnelly, R. (2015). Tensions and challenges in the management of diversity and inclusion in IT Services multinationals in India. Human Resources Management, 54(2), 199–215. https://doi.org/10.1002/hrm.21654.CrossRef

Euro-Case. (2013). “ Transforming Manufacturing ” A path to a smart, sustainable and inclusive growth in Europe. Retrieved December 11, 2017, from http://www.euro-case.org/index.php/transforming-manufacturing.html.

Faems, D., De Visser, M., Andries, P., & Van Looy, B. (2010). Technology alliance portfolios and financial performance: Value-enhancing and cost-increasing effects of open innovation. Journal of Product Innovation Management, 27(6), 785–796. https://doi.org/10.1111/j.1540-5885.2010.00752.x.CrossRef

Fennelly, D., & Cormican, K. (2006). Value chain migration from production to product centred operations: An analysis of the Irish medical device industry. Technovation, 26(1), 86–94. https://doi.org/10.1016/j.technovation.2004.07.005.CrossRef

Fritzsche, L., Wegge, J., Schmauder, M., Kliegel, M., & Schmidt, K. H. (2014). Good ergonomics and team diversity reduce absenteeism and errors in car manufacturing. Ergonomics, 57(2), 148–161. https://doi.org/10.1080/00140139.2013.875597.CrossRef

Gao, J., Yao, Y., Zhu, V. C. Y., Sun, L., & Lin, L. (2011). Service-oriented manufacturing: A new product pattern and manufacturing paradigm. Journal of Intelligent Manufacturing, 22(3), 435–446. https://doi.org/10.1007/s10845-009-0301-y.CrossRef

Garetti, M., & Taisch, M. (2012). Sustainable manufacturing: Trends and research challenges. Production Planning and Control, 23(2–3), 83–104. https://doi.org/10.1080/09537287.2011.591619.CrossRef

Garnero, A., & Kampelmann, S. (2014). The heterogeneous effects of workforce diversity on productivity, wages and profits. Industrial Relations, 53(3), 430–477. https://doi.org/10.1111/irel.12064.CrossRef

Groover, M. P. (2016). Automation, production systems, and computer integrated manufacturing. New Delhi: Pearson Education, Prentice Hall. https://doi.org/10.1108/aa.2009.03329dae.001.CrossRef

Hancock, P. A. (2014). Automation: How much is too much? Ergonomics, 57(3), 449–454. https://doi.org/10.1080/00140139.2013.816375.CrossRef

Harrison, D. A., & Klein, K. J. (2007). What’s the difference? Diversity constructs as separation, variety, or disparity in organizations. Academy of Management Review, 32(4), 1199–1228. https://doi.org/10.5465/AMR.2007.26586096.CrossRef

Hunt, I., Brien, E. O., Tormey, D., Alexander, S., Mc Quade, E., & Hennessy, M. (2013). Educational programmes for future employability of graduates in SMEs. Journal of Intelligent Manufacturing, 24(3), 501–510. https://doi.org/10.1007/s10845-011-0519-3.CrossRef

ICRC. (1987). Commentary on the additional protocols of 8 June 1977 to the Geneva conventions of 12 August 1949. In C. Pilloud, Y. Sandoz, & B. Zimmermann (Eds.), International Committee of the Red Cross (Vol. 27). Geneva: Martinus Nijhoff Publishers. https://doi.org/10.1017/S0020860400061131.CrossRef

IMF. (2017). Inclusive manufacturing forum. Retrieved December 11, 2017, from http://nias.res.ininclusivemanufacturing/.

International Organization for Standardization (2015). ISO 14001. Geneva, Switzerland. Retrieved from https://www.iso.org/obp/ui/#iso:std:iso:14001:ed-3:v1:en.

Jackson, P. R., & Wall, T. D. (1991). How does operator control enhance performance of advanced manufacturing technology? Ergonomics, 34(10), 1301–1311. https://doi.org/10.1080/00140139108964869.CrossRef

Jensen, F. V. (1996). An introduction to bayesian networks. London: UCL Press.

Jones, B., Jenkinson, I., Yang, Z., & Wang, J. (2010). The use of Bayesian network modelling for maintenance planning in a manufacturing industry. Reliability Engineering and System Safety, 95(3), 267–277. https://doi.org/10.1016/j.ress.2009.10.007.CrossRef

King, A. A., & Lenox, M. J. (2001). Does It really pay to be green? An empirical study of firm environmental and financial performance: an empirical study of firm environmental and financial performance. Journal of Industrial Ecology, 5(1), 105–116. https://doi.org/10.1162/108819801753358526.CrossRef

Kochan, T., Bezrukova, K., Ely, R., Jackson, S., Joshi, A., Jehn, K., et al. (2003). The effects of diversity on business performance: Report of the diversity research network. Human Resource Management, 42(1), 3–21. https://doi.org/10.1002/hrm.10061.CrossRef

Kumar, M., Antony, J., & Tiwari, M. K. (2011). Six sigma implementation framework for SMEs—A roadmap to manage and sustain the change. International Journal of Production Research, 49(18), 5449–5467. https://doi.org/10.1080/00207543.2011.563836.CrossRef

Kusiak, A. (2017). Smart manufacturing must embrace big data. Nature, 544, 23–25. https://doi.org/10.1038/544023a.CrossRef

Lee, J. D., & See, K. A. (2004). Trust in automation: Designing for appropriate reliance. Human Factors, 46(1), 50–80. https://doi.org/10.1518/hfes.46.1.50_30392.CrossRef

Li, S., & Zeng, W. (2016). Risk analysis for the supplier selection problem using failure modes and effects analysis (FMEA). Journal of Intelligent Manufacturing, 27(6), 1309–1321. https://doi.org/10.1007/s10845-014-0953-0.CrossRef

Lindström, V., & Winroth, M. (2010). Aligning manufacturing strategy and levels of automation: A case study. Journal of Engineering and Technology Management, 27(3–4), 148–159. https://doi.org/10.1016/j.jengtecman.2010.06.002.CrossRef

Loven, E. M., & Helander, M. G. (1997). Effect of operator competence on assessment of quality control in manufacturing. International Journal of Industrial Ergonomics, 19(4), 307–316. https://doi.org/10.1016/S0169-8141(96)00040-6.CrossRef

Matthews, G. A., & Dickinson, A. M. (2000). Effects of alternative activities on time allocated to task performance under different percentages of incentive pay. Journal of Organizational Behavior Management, 20(1), 3–27. https://doi.org/10.1300/J075v20n01.CrossRef

Mavrikios, D., Papakostas, N., Mourtzis, D., & Chryssolouris, G. (2013). On industrial learning and training for the factories of the future: A conceptual, cognitive and technology framework. Journal of Intelligent Manufacturing, 24(3), 473–485. https://doi.org/10.1007/s10845-011-0590-9.CrossRef

Mears, L., Omar, M., & Kurfess, T. R. (2011). Automotive engineering curriculum development: Case study for Clemson University. Journal of Intelligent Manufacturing, 22(5), 693–708. https://doi.org/10.1007/s10845-009-0329-z.CrossRef

Mehrabi, M. G., Ulsoy, A. G., & Koren, Y. (2000). Reconfigurable manufacturing systems: Key to future manufacturing. Journal of Intelligent Manufacturing, 11(4), 403–419. https://doi.org/10.1023/A:1008930403506.CrossRef

Milliken, F. J., & Martins, L. L. (1996). Searching for common treads: Undertanding the multiple effects of in organizational diversity. Academy of Management, 21(2), 402–433. https://doi.org/10.5465/AMR.1996.9605060217.CrossRef

Montgomery, N., Banjevic, D., & Jardine, A. K. S. (2012). Minor maintenance actions and their impact on diagnostic and prognostic CBM models. Journal of Intelligent Manufacturing, 23(2), 303–311. https://doi.org/10.1007/s10845-009-0352-0.CrossRef

Neil, S. (2016). Diversity and inclusion in manufacturing. Retrieved November 23, 2017, from https://www.automationworld.com/diversity-and-inclusion-manufacturing.

NETICA. (2017). Norsys—Netica Application Software. Retrieved December 23, 2017, from https://www.norsys.com.

O’Sullivan, D., Rolstadås, A., & Filos, E. (2011). Global education in manufacturing strategy. Journal of Intelligent Manufacturing, 22(5), 663–674. https://doi.org/10.1007/s10845-009-0326-2.CrossRef

Onnasch, L., Wickens, C. D., Li, H., & Manzey, D. (2014). Human performance consequences of stages and levels of automation: An integrated meta-analysis. Human Factors, 56(3), 476–488. https://doi.org/10.1177/0018720813501549.CrossRef

Paci, A. M., Lalle, C., & Chiacchio, M. S. (2013). Education for innovation: Trends, collaborations and views. Journal of Intelligent Manufacturing, 24(3), 487–493. https://doi.org/10.1007/s10845-012-0631-z.CrossRef

Parasuraman, R., & Manzey, D. H. (2010). Complacency and bias in human use of automation: An attentional integration. Human Factors, 52(3), 381–410. https://doi.org/10.1177/0018720810376055.CrossRef

Parasuraman, R., & Riley, V. (1997). Humans and automation: Use, misuse, disuse, abuse. Human Factors, 39, 230–253. https://doi.org/10.1518/001872097778543886.CrossRef

Parasuraman, R., Sheridan, T. B., & Wickens, C. D. (2000). A model for types and levels of human interaction with automation. IEEE Transactions on Systems, Man, and Cybernetics Part A: Systems and Humans, 30(3), 286–297. https://doi.org/10.1109/3468.844354.CrossRef

Rachuri, S., Sriram, R. D., & Sarkar, P. (2009). Metrics, standards and industry best practices for sustainable manufacturing systems. In 5th Annual IEEE conference on automation science and engineering, CASE 2009 (pp. 472–477). Banglore, India. https://doi.org/10.1109/COASE.2009.5234090.

Rao, P., & Holt, D. (2005). Do green supply chains lead to competitiveness and economic performance? International Journal of Operations & Production Management, 25(9), 898–916. https://doi.org/10.1108/01443570510613956.CrossRef

Richard, O. C. (2000). Racial diversity, business strategy and firm performance. Academy of Management Journal, 43(2), 164–177. https://doi.org/10.2307/3250983.CrossRef

Romero, D., & Molina, A. (2011). Collaborative networked organisations and customer communities: Value co-creation and co-innovation in the networking era. Production Planning and Control, 22(5–6), 447–472. https://doi.org/10.1080/09537287.2010.536619.CrossRef

Roy, R., Stark, R., Tracht, K., Takata, S., & Mori, M. (2016). Continuous maintenance and the future—Foundations and technological challenges. CIRP Annals Manufacturing Technology, 65(2), 667–688. https://doi.org/10.1016/j.cirp.2016.06.006.CrossRef

Salditt, P., & Bothell, W. A. (2004). Trends in medical device design and manufacturing. Journal of SMT, 17(3), 19–24. https://pdfs.semanticscholar.org/9862/c557699dd498cd41215136cc47b2fc9fdaba.pdf.

Seppala, P., Tuominen, E., & Koskinen, P. (1992). Impact of flexible production philosophy and advanced manufacturing technology on organizations and jobs. The International Journal of Human Factors in Manufacturing, 2(2), 177–192.CrossRef

Sharma, P., & Kulkarni, M. S. (2016). Bayesian belief network for assessing impact of factors on army’s lean–agile replenishment system. Journal of Military Studies, 7(1), 11–23. https://doi.org/10.1515/jms-2016-0002.CrossRef

Sharma, P., Kulkarni, M. S., & Yadav, V. (2017). A simulation based optimization approach for spare parts forecasting and selective maintenance. Reliability Engineering and System Safety, 168, 274–289. https://doi.org/10.1016/j.ress.2017.05.013.CrossRef

Shen, J., Chanda, A., D’Netto, B., & Monga, M. (2009). Managing diversity through human resource management: An international perspective and conceptual framework. International Journal of Human Resource Management, 20(2), 235–251. https://doi.org/10.1080/09585190802670516.CrossRef

Stone, D. L., & Deadrick, D. L. (2015). Challenges and opportunities affecting the future of human resource management. Human Resource Management Review, 25(2), 139–145. https://doi.org/10.1016/j.hrmr.2015.01.003.CrossRef

Sun, Y., Giblin, D. J., & Kazerounian, K. (2009). Accurate robotic belt grinding of workpieces with complex geometries using relative calibration techniques. Robotics and Computer-Integrated Manufacturing, 25(1), 204–210. https://doi.org/10.1016/j.rcim.2007.11.005.CrossRef

Tiwari, M. K., Antony, J., & Montgomery, D. C. (2008). Editorial note for the special issue on "Effective decision support to implement lean and six sigma methodologies in the manufacturing and service sectors.". International Journal of Production Research, 46(23), 6563–6566. https://doi.org/10.1080/00207540802230041.CrossRef

Tiwari, M. K., & Roy, D. (2002). Application of an evolutionary fuzzy system for the estimation of workforce deployment and cross-training in an assembly environment. International Journal of Production Research, 40(18), 4651–4674. https://doi.org/10.1080/00207540210158014.CrossRef

UN. (2015). Infrastructure and Industrialization–United Nations Sustainable Development Goal-9: Build resilient infrastructure, promote sustainable industrialization and foster innovation. Retrieved December 21, 2017, from http://www.un.org/sustainabledevelopment/infrastructure-industrialization/.

Van Beers, C., & Zand, F. (2014). R&D cooperation, partner diversity, and innovation performance: An empirical analysis. Journal of Product Innovation Management, 31(2), 292–312. https://doi.org/10.1111/jpim.12096.CrossRef

Vogl, G. W., Weiss, B. A., & Helu, M. (2016). A review of diagnostic and prognostic capabilities and best practices for manufacturing. Journal of Intelligent Manufacturing. https://doi.org/10.1007s10845-016-1228-8.

Wickens, C. D., Gordon, S. E., & Liu, Y. (2004). An introduction to human factors engineering. New York, NY: Pearson Education Inc.

Wiersema, M. F., & Bird, A. (1993). Organizational demography in Japanese firms: Group heterogeneity, individual dissimilarity, and top management team turnover. Academy of Management Journal, 36(5), 996–1025. https://doi.org/10.2307/256643.CrossRef

Witcher, M., Carbonell, R., Odum, J., Bigelow, P., Lewis, P., & Zivitz, M. (2013). Facility of the future: Next generation biomanufacturing forum: Part I: "Why we cannot stay here"—The challenges, risks, and business drivers for changing the paradigm. Pharmaceutical Engineering, 33(1), 1–8.

Yao, X., Sun, Z., Li, L., & Shao, H. (2015). Joint maintenance and energy management of sustainable manufacturing systems. International Manufacturing Science and Engineering Conference, MSEC, 2015(2), 1–6. https://doi.org/10.1115/MSEC20159345.CrossRef

Zhou, F., Ji, Y., & Jiao, R. J. (2013). Affective and cognitive design for mass personalization: Status and prospect. Journal of Intelligent Manufacturing, 24(5), 1047–1069. https://doi.org/10.1007/s10845-012-0673-2.CrossRef

Title: Product quality in an inclusive manufacturing system: some considerations
Authors: Vedpal Arya
S. G. Deshmukh
Naresh Bhatnagar
Publication date: 15-05-2018
Publisher: Springer US
Published in: Journal of Intelligent Manufacturing / Issue 8/2019
Print ISSN: 0956-5515
Electronic ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-018-1423-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2019

Determination of optimal build orientation for additive manufacturing using Muirhead mean and prioritised average operators

A mathematical model and artificial bee colony algorithm for the lexicographic bottleneck mixed-model assembly line balancing problem

Industrial feedforward control technology: a review

Modelling and simulation of operation and maintenance strategy for offshore wind farms based on multi-agent system

Prediction of surface roughness quality of green abrasive water jet machining: a soft computing approach

Inclusive risk modeling for manufacturing firms: a Bayesian network approach

Premium Partners