nach oben

Journal of Intelligent Manufacturing

13.08.2014

Risk analysis for the supplier selection problem using failure modes and effects analysis (FMEA)

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 6/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

While seeking for global suppliers is a general trend for lower cost and better quality, it is not trivial for a company to assess the corresponding risks in supplier selection. This paper proposes the supplier selection method that applies failures modes and effects analysis (FMEA) to assess the risks in the decision process. As each supplier is evaluated under the common multi-criteria framework, risks are viewed as the possible deviations from expected performance, and they are interpreted as failure modes in risk analysis. Following the concepts of FMEA, each failure mode is examined with respect to the possible causes and effects. This method generates two technical deliverables for supporting risk analysis. Firstly, the FMEA document is developed to support the team’s discussion of supplier risks and accumulate the risk knowledge within the company. Secondly, the ranking numbers based on FMEA (i.e., risk priority numbers) are utilized to evaluate a discount on a supplier’s performance according to their risk level. A real-case example about selecting methanol suppliers in the global market is used to demonstrate the proposed method for risk analysis in practice.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Anleitner, M. A. (2010). The power of deduction: Failure modes and effects analysis for design. Milwaukee: ASQ Quality Press.

Babazadeh, R., & Razmi, J. (2012). A robust stochastic programming approach for agile and responsive logistics under operational and disruption risks. International Journal of Logistics Systems and Management, 13, 458–482.CrossRef

Bradley, J. R., & Guerrero, H. H. (2011). An alternative FMEA method for simple and accurate ranking of failure modes. Decision Sciences, 42, 743–771.CrossRef

Carlson, C. (2012). Effective FMEAs: Achieving safe, reliable, and economical products and processes using failure mode and effects analysis. New Jersey: Wiley.CrossRef

Carrera, D. A., & Mayorga, R. V. (2008). Supply chain management: A modular fuzzy inference system approach in supplier selection for new product development. Journal of Intelligent Manufacturing, 19, 1–12.CrossRef

Chan, F. T. S., & Kumar, N. (2007). Global supplier development considering risk factors using fuzzy extended AHP-based approach. OMEGA, 35, 417–431.CrossRef

Chang, K. H., Chang, Y. C., & Lai, P. T. (2013). Applying the concept of exponential approach to enhance the assessment capability of FMEA. Journal of Intelligent Manufacturing. doi:10.1007/s10845-013-0747-9.

Chang, K. H., & Cheng, C. H. (2011). Evaluating the risk of failure using the fuzzy OWA and DEMATEL method. Journal of Intelligent Manufacturing, 22, 113–129.CrossRef

Chao, L. P., & Ishii, K. (2007). Design process error-proofing: Failure modes and effects analysis of the design process. ASME Journal of Mechanical Design, 129, 491–501.

Choi, T. Y., & Krause, D. R. (2006). The supply base and its complexity: Implications for transaction costs, risks, responsiveness, and innovation. Journal of Operations Management, 24, 637–652.CrossRef

Chopra, S., & Sodhi, M. S. (2004). Managing risk to avoid supply-chain breakdown. MIT Sloan Management Review, 46, 53–61.

Christopher, M., & Lee, H. (2004). Mitigating supply chain risk through improved confidence. International Journal of Physical Distribution and Logistics Management, 34, 388–396.CrossRef

De Boer, L., Van der Wegen, L., & Telgen, J. (1998). Outranking methods in support of supplier selection. European Journal of Purchasing and Supply Management, 4, 109–118.CrossRef

De Boer, L., Labro, E., & Morlacchi, P. (2001). A review of methods supporting supplier selection. European Journal of Purchasing and Supply Management, 7, 75–89.CrossRef

Drake, M. (2011). Global supply chain management. New York: Business Expert Press.CrossRef

Ghoshal, S. (1987). Global strategy: An organizing framework. Strategic Management Journal, 8, 425–440.CrossRef

Hallikas, J., Virolainen, V., & Tuominen, M. (2002). Risk assessment and management for supply chain networks: A case study. International Journal of Production Economics, 78, 45–55.CrossRef

Harland, C., Brenchley, R., & Walker, H. (2003). Risk in supply networks. Journal of Purchasing and Supply Management, 9, 51–62.CrossRef

Ho, W., Xu, X., & Dey, P. K. (2010). Multi-criteria decision making approaches for supplier evaluation and selection: A literature review. European Journal of Operational Research, 202, 16–24.CrossRef

Hopkin, P. (2013). Risk management. London: Kogan Page Ltd.

Jain, R., Singh, A. R., Yadav, H. C., & Mishra, P. K. (2012). Using data mining synergies for evaluating criteria at pre-qualification stage of supplier selection. Journal of Intelligent Manufacturing. doi:10.1007/s10845-012-0684-z.

Jain, R., Singh, A. R., & Mishra, P. K. (2013). Prioritization of supplier selection criteria: A fuzzy-AHP approach. MIT International Journal of Mechanical Engineering, 3, 34–42.

Juttner, U., Peck, H., & Christopher, M. (2003). Supply chain risk management: Outlining an agenda for future research. International Journal of Logistics Research and Applications, 6, 197–210.CrossRef

Kang, H. Y., Lee, A. H. I., & Yang, C. Y. (2012). A fuzzy ANP model for supplier selection as applied to IC packaging. Journal of Intelligent Manufacturing, 23, 1477–1488.CrossRef

Kmenta, S., & Ishii, K. (2004). Scenario-based failure modes and effects analysis using expected cost. ASME Journal of Mechanical Design, 126, 1027.CrossRef

Kubat, C., & Yuce, B. (2012). A hybrid intelligent approach for supply chain management system. Journal of Intelligent Manufacturing, 23, 1237–1244.CrossRef

Kull, T. J., & Talluri, S. (2008). A supply risk reduction model using integrated multicriteria decision making. IEEE Transactions on Engineering Management, 55, 409–419.CrossRef

Kumar, S. K., Tiwari, M. K., & Babiceanu, R. F. (2010). Minimisation of supply chain cost with embedded risk using computational intelligence approaches. International Journal of Production Research, 48, 3717–3739.CrossRef

Manuj, I., & Mentzer, J. T. (2008). Global supply chain risk management strategies. International Journal of Physical Distribution and Logistics Management, 38, 192–223.CrossRef

March, J. G., & Shapira, Z. (1987). Managerial perspectives on risk and risk taking. Management Science, 33, 1404–1418.CrossRef

Ozaki, T., Lo, M., Kinoshita, E., & Tzeng, G. (2012). Decision-making for the best selection of suppliers by using minor ANP. Journal of Intelligent Manufacturing, 23, 2171–2178.

Pang, B., & Bai, S. (2013). An integrated fuzzy synthetic evaluation approach for supplier selection based on analytic network process. Journal of Intelligent Manufacturing, 24, 163–174.CrossRef

Peck, H. (2005). Drivers of supply chain vulnerability: An integrated framework. International Journal of Physical Distribution and Logistics Management, 35, 210–232.CrossRef

Pillay, A., & Wang, J. (2003). Modified failure mode and effects analysis using approximate reasoning. Reliability Engineering and System Safety, 79, 69–85.CrossRef

Raisinghani, M. S., Ette, H., Pierce, R., Cannon, G., & Daripaly, P. (2005). Six Sigma: Concepts, tools, and applications. Industrial Management & Data Systems, 105, 491–505.CrossRef

Schoenherr, T., Tummala, R., & Harrison, T. (2008). Assessing supply chain risks with the analytic hierarchy process: Providing decision support for the offshoring decision by a US manufacturing company. Journal of Purchasing and Supply Management, 14, 100–111.CrossRef

Semelsberger, T. A., Rodney, L. B., & Greene, H. L. (2006). Dimethyl ether (DME) as an alternative fuel. Journal of Power Sources, 156, 497–511.CrossRef

Sharma, S., & Balan, S. (2012). An integrative supplier selection model using Taguchi loss function, TOPSIS and multi criteria goal programming. Journal of Intelligent Manufacturing. doi:10.1007/s10845-012-0640-y.

Singh, A. R., Mishra, P. K., Jain, R., & Khurana, M. K. (2012). Design of global supply chain network with operational risks. International Journal of Advanced Manufacturing Technology, 60, 273–290.CrossRef

Smeltzer, L., & Siferd, S. (1998). Proactive supply management: The management of risk. International Journal of Purchasing and Materials Management, 34, 38–45.CrossRef

Stone, R. B., Tumer, I. Y., & Stock, M. E. (2005). Linking product functionality to historic failures to improve failure analysis in design. Research in Engineering Design, 16, 96–108.CrossRef

Tabrizi, B. H., & Razmi, J. (2013). Introducing a mixed-integer non-linear fuzzy model for risk management in designing supply chain networks. Journal of Manufacturing Systems, 32, 295–307.CrossRef

Talluri, S., Narasimhan, R., & Nair, A. (2006). Vendor performance with supply risk: A chance-constrained DEA approach. International Journal of Production Economics, 100, 212–222.CrossRef

Tummala, R., & Schoenherr, T. (2011). Assessing and managing risks using the supply chain risk management process (SCRMP). Supply Chain Management: An International Journal, 16, 474–483.CrossRef

Welborn, C. (2007). Using FMEA to assess outsourcing risk. Quality Progress, 40, 17–21.

Wu, D. D., Zhang, Y., Wu, D., & Olson, D. L. (2010). Fuzzy multi-objective programming for supplier selection and risk modeling: A possibility approach. European Journal of Operational Research, 200, 774–787.CrossRef

Wu, T., Blackhurst, J., & O’Grady, P. (2007). Methodology for supply chain disruption analysis. International Journal of Production Research, 45, 1665–1682.CrossRef

Zeng, W. (2013). Risk analysis for supplier selection problem using failure mode and effects analysis (FMEA). M.A.Sc: Thesis, Concordia University, Canada.

Zsidisin, G. A. (2003). Managerial perceptions of supply risks. Journal of Supply Chain Management, 39, 14–26.CrossRef

Zsidisin, G. A., Ellram, L. M., Carter, J. R., & Cavinato, J. L. (2004). An analysis of supply risk assessment techniques. International Journal of Physical Distribution and Logistics Management, 34, 397–413.CrossRef

Titel: Risk analysis for the supplier selection problem using failure modes and effects analysis (FMEA)
Publikationsdatum: 13.08.2014
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 6/2016
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-014-0953-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht