Top

Polymer Science, Series D

Published in:

01-12-2023

Properties of Polymers Obtained by the Mechanism of Anionic Polymerization of Epoxy Resins under the Action of Imidazoles

Authors: M. S. Fedoseev, L. F. Derzhavinskaya

Published in: Polymer Science, Series D | Issue 4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Anionic polymerization polymers were produced based on epoxy resins and a number of imidazoles. Their thermomechanical and thermal properties have been determined, and it has been established that they have high heat resistance and thermal stability. The free surface energy parameters of polymers and the theoretical work of adhesion have been calculated. Adhesive shear strength of epoxy compositions with imidazoles with an aluminum substrate has been determined, and the possibility of their use at high temperatures has been shown.

previous article The Effect of the Structure of Heterocyclic Monomers on the Heat Resistance of Epoxy Adhesives

next article Ultrasonic Technologies in Producing Adhesive Joints: A Review

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Y. R. Ham, S. H. Kim, Y. J. Shin, D. H. Lee, M. Yang, J. H. Min, and J. S. Shin, “A comparison of some imidazoles in the curing of epoxy resin,” J. Ind. Eng. Chem. 16, 556–559 (2010). https://doi.org/10.1016/j.jiec.2010.03.022CrossRef

K. Leena, P. B. Soumyamol, M. Baby, S. Suraj, R. Rajeev, and D. S. Mohan, “Non-isothermal cure and decomposition kinetics of epoxy-imidazole systems,” J. Therm. Anal. Calorim. 130, 1053–1061 (2017). https://doi.org/10.1007/s10973-017-6410-5CrossRef

M. S. Fedoseev and L. F. Derzhavinskaya, “Synthesis and properties of polymeric materials prepared by anionic polymerization of epoxy oligomers,” Russ. J. Appl. Chem. 85, 1753–1757 (2012).CrossRef

K. Kudo, et al., “Imidazole-type thermal latent curing agents with high miscibility for one-component epoxy thermosetting resins,” J. Polym. Sci., Part A: Polym. Chem. 54, 2680–2688 (2016). https://doi.org/10.1002/pola.28146CrossRef

M. Döring and U. Arnold, “Polymerization of epoxy resins initiated by metal complexes,” Polym. Int. 58, 976–988 (2009). https://doi.org/10.1002/pi.2618CrossRef

A. Dzienia et al., “Impact of imidazolium-based ionic liquids on the curing kinetics and physicochemical properties of nascent epoxy resins,” Macromolecules 53, 6341–6352 (2020). https://doi.org/10.1021/acs.macromol.0c00783CrossRefPubMedPubMedCentral

M. G. Kiselev, V. V. Savich, and T. P. Pavich, “Determination of contact angle on flat surfaces,” Vestn. Belarus Nats. Tekh. Univ., No. 1, 38–41 (2006).

M. S. Fedoseev, L. F. Derzhavinskaya, I. A. Borisova, and T. E. Oshchepkova, “Anionic polymerization of epoxy resins under the action of imidazoles,” Russ. J. Appl. Chem. 95, 357–365 (2022). https://doi.org/10.31857/S0044461822030045CrossRef

I. A. Starostina, D. A. Nguen, E. V. Burdova, and O. V. Stoyanov, “Adhesion of polymers to metals: new approaches to assessing the surface properties of metals,” Klei. Germetiki. Tekhnol., No. 7, 27–30 (2012).

10.

N. V. Yakovets, N. P. Krut’ko, and O. N. Opanasenko, “Determination of free surface energy of powdered resinous-asphaltene substances by the Owens-Wendt-Rabel-Kaelble method,” Sviridovskie Chteniya, No. 8, 253 (2012).

11a.

W. A. Zisman, Adv. Chem. Ser., No. 43, 1 (1964);

11b.

R. E. Baier, Bull. N. Y. Acad. Med., No. 48, 257 (1972).

Title: Properties of Polymers Obtained by the Mechanism of Anionic Polymerization of Epoxy Resins under the Action of Imidazoles
Authors: M. S. Fedoseev
L. F. Derzhavinskaya
Publication date: 01-12-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223040093

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2023

Ultrasonic Technologies in Producing Adhesive Joints: A Review

A Study of the Influence of Negative Temperatures on the Impact Strength of a Carbon-Fiber Composite with a Hybrid Matrix

The Effect of the Structure of Heterocyclic Monomers on the Heat Resistance of Epoxy Adhesives

Main Components Composing Domestic Epoxy Glues (Review). Part I

A Study of the Influence of Bis-Maleimides on the Properties of Oligoestermaleinates

Modern Phenolic Adhesives for Aviation and Engineering. Part 2. Chemical Modification

Premium Partners