Top

Polymer Science, Series D

Published in:

01-12-2023

A Study of the Influence of Bis-Maleimides on the Properties of Oligoestermaleinates

Authors: V. A. Danilov, O. A. Kolyamshin, A. N. Vasil’ev, N. E. Temnikova, M. V. Kolpakova, O. V. Stoyanov

Published in: Polymer Science, Series D | Issue 4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Copolymers based on unsaturated polyester resin and bis-maleimides with various substituents have been obtained. Curing was carried out in a system consisting of a solution of oligoestermaleinate in styrene with the addition of bis-maleimides. The properties of the resulting polymers have been studied, showing the possibility of their use as heat-resistant dielectric materials.

previous article Evaluation of Uniformity of Particle Distribution in Composite Materials Based on Molded Polyurethanes

next article Estimating the Fuel Permeability of Thermoplastic Polyurethane from the Saturated Vapor Pressure of Kerosene

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. Ya. Beider et al., “Composite thermoplastic materials and polyimide foams.” Trudy VIAM, No. 11, 1 (2013).

X. H. Xiong, et al., “Cure kinetics and thermal properties of novel bismaleimide containing phthalide cardo structure,” Thermochim. Acta 514, 44–50 (2011).CrossRef

R. J. Iredale, C. Ward, and I. Hamerton, “Modern advances in bismaleimide resin technology: A 21st century perspective on the chemistry of addition polyimides,” Prog. Polym. Sci. 69, 1–21 (2017).CrossRef

Yu. A. Mikhailin, Heat-Resistant Polymers and Polymer Materials (Professiya, St. Petersburg, 2006) [in Russian].

A. V. Babkin et al., “Infusion bismaleimide binders for polymer composite materials,” Izv. Vyssh. Uchebn. Zaved., Khim. Khim. Tekhnol. 58, 54–57 (2015).

P. A. Jeemol, S. Mathew, and C. P. Nair, “Maleimide end-capped polyether telechelics as novel toughening agents for unsaturated polyester resin,” J. Polym. Res. 27, 1–14 (2020).CrossRef

G. N. Stepanova and V. V. Zakharchenko, “History of innovation in printing technologies,” Mediaekonomika 21 Veka, No. 3, 32–41 (2018).

V. D. Cherkasov et al., “Polymer binders for the production of vibration-absorbing materials,” Region. Arkhitekt. Stroit. 32, 59–67 (2017).

S. V. Kurin et al., Polymer Composites with High Elastic-Strength Characteristics (Penza Gos. Univ. Arkhitekt. Stroit., Penza, 2016) [in Russian]

10.

J. P. M. Arias, et al., “Aging in water and in an alkaline medium of unsaturated polyester and epoxy resins: experimental study and modeling,” Adv. Polym. Technol. 37, 450–460 (2018). https://doi.org/10.1002/adv.21684CrossRef

11.

Q. Zhao, et al., “Synthesis of functionalized poly (N‑(3-carboxyphenyl)maleimide-alt-styrene) and its heat-resistance mechanism,” Polym. Sci., Ser. B 62, 368–374 (2020).CrossRef

12.

M. Zh. Burkeev, et al., “Synthesis and properties of poly(propylene glycol maleate phthalate)– styrene copolymers as a base of composite materials,” Russ. J. Appl. Chem. 19, 1742–17499 (2018).CrossRef

13.

M. Lu, M. Shim, and S. Kim, “Reaction mechanism of an unsaturated polyester system containing thickeners,” Eur. Polym. J. 37, 1075–1078 (2001).CrossRef

14.

V. A. Danilov, et al., “Modification of oligoester maleinate by alkyl ester of n-maleinimidobenzoic acid,” Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol 62, 78–84 (2019).CrossRef

15.

X. Chen et al., “A new type of unsaturated polyester resin with low dielectric constant and high thermostability: preparation and properties,” RSC Adv., No. 2, 6504–6508 (2012). https://doi.org/10.1039/C2RA20617J

16.

Yu. N. Mitrasov, O. A. Kolyamshin, and V. A. Danilov, Maleimides: Synthesis, Properties and Polymers Based On Them. Monograph (Chuvash. Gos. Ped. Univ., Cheboksary, 2017) [in Russian].

17.

Y. Liu, et al., “P (N-phenylmaleimide-alt-styrene) introduced with 4-carboxyl and its effect on the heat deflection temperature of nylon 6,” Materials 11, 2330 (2018).CrossRefPubMedPubMedCentral

18.

Sh. Yanga et al., “Mechanically robust self-healing and recyclable flame-retarded polyurethane elastomer based on thermoreversible crosslinking network and multiple hydrogen bonds,” Chem. Eng. J. 391 (2020). https://doi.org/10.1016/j.cej.2019.123544

19.

P. A. Jeemol et al., “Maleimide end-capped polyether telechelics as novel toughening agents for unsaturated polyester resin,” J. Polym. Res. 27 (2020). https://doi.org/10.1007/s10965-020-02197-z

20.

Y. Chen, H. Guo, and C. Geng, “Effect of poly(ether ether ketone) and allyl compounds on microstructure and properties of bismaleimide,” J. Mater. Sci.: Mater. Electron. 30, 991–1000 (2019).

Title: A Study of the Influence of Bis-Maleimides on the Properties of Oligoestermaleinates
Authors: V. A. Danilov
O. A. Kolyamshin
A. N. Vasil’ev
N. E. Temnikova
M. V. Kolpakova
O. V. Stoyanov
Publication date: 01-12-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S199542122304007X

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2023

Stability in Supersonic Flow of Complex-Shaped Composites Based on Reinforced Inorganic and Cold-Curing Hybrid Binders

The Influence of Loading Conditions under Mechanical Impact on Polymer Composite Materials

Ultrasonic Technologies in Producing Adhesive Joints: A Review

A Study of the Character of the Effect of an Organophosphorus Acid on the Physicochemical Characteristics of Block Copoly(sulfone arylate)s

Film Formers Based on Plant Raw Materials for Polyurethane Coatings: A Review

A Study of the Structure and Thermodynamic Properties of Polyvinyl Acetate Dispersion after Microwave Electromagnetic Treatment

Premium Partners