Top

Polymer Science, Series D

Published in:

01-12-2023

Evaluation of Uniformity of Particle Distribution in Composite Materials Based on Molded Polyurethanes

Authors: R. A. Alekhina, S. P. Tuzhilin, A. S. Sviridov, Yu. A. Goncharova

Published in: Polymer Science, Series D | Issue 4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The distribution of filler particles in composite materials based on molded polyurethane has been studied. Introduction of various particles into molded polyurethane improves its mechanical and performance properties. Based on the research results, it was concluded that the most uniform distribution of particles is observed in talc-based composites (coefficient of variation of 7.3%, and the greatest spread of particles in composites with basalt fiber of 28.3%).

previous article A Study of the Character of the Effect of an Organophosphorus Acid on the Physicochemical Characteristics of Block Copoly(sulfone arylate)s

next article A Study of the Influence of Bis-Maleimides on the Properties of Oligoestermaleinates

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. S. Dorokhov, A. G. Aksenov, A. V. Sibirev, et al., “Justification of design and technological parameters of the onion harvester bed-shaping roller spiral drum,” INMATEH-Agric. Eng. 60, 107—114 (2020).CrossRef

A. Dorokhov, A. Aksenov, A. Sibirev, et al., “Results of laboratory studies of the automated sorting system for root and onion crops,” Agronomy 11, 1257 (2021).CrossRef

A. V. Sibirev, A. G. Aksenov, and A. S. Dorokhov, “Results of laboratory investigations of soil screening ability of a chain digger with asymmetric vibrator arrangement,” INMATEH-Agric. Eng. 57, 9–18 (2019).CrossRef

Yu. V. Tertyshnaya, N. S. Levina, A. A. Popov, et al., “Hydrolytic destruction of agrofiber made of natural polymers,” Fiber Chem. 2, 117–120 (2019).CrossRef

S. P. Tuzhilin, Yu. A. Lopatina, and A. S. Sviridov, “Processing of polymer materials by free casting in vacuum,” Vestn. Belgorod Gos. Tekhnol. Univ., No. 7, 93—100 (2020).

G. Hegde, S. Choi, and H. Xiao, “The application of polyurethane material structure in the greenhouse,” J. Adv. Mater. Res. 1033–1034, 970–977 (2014).

A. S. Dorokhov, A. S. Sviridov, Yu. A.Goncharova, et al., “Evaluation of the chemical resistance of polyurethane compounds used in the manufacture of diaphragms for diaphragm piston pumps,” Tekh. Oborud. dlya Sela, No. 8, 41—44 (2021).

A. S. Sviridov and R. A. Alekhina, “Selection of materials used for the manufacture of diaphragms of diaphragm piston pumps in aggressive environments,” Agroinzheneriya, No. 1, 52—57 (2021).

R. Jeevanantham, V. P. Venketaramanamurthy, and D. Rajeswari, “Mechanical and wear characterization of basalt fiber reinforced polyurethane composites,” Int. J. Adv. Eng. (2016).

10.

G. Zhao, T. Wang, and Q. Wang, “Studies on wettability, mechanical and tribological properties of the polyurethane composites filled with talc,” Appl. Surf. Sci. 258, 3557–3564 (2012).CrossRef

11.

A. V. Martynova, I. Chen, Yu. A. Lopatina, et al., “Analysis of the nonuniform reinforcing-phase distribution in cast rods and a deposited layer made of an aluminum-matrix composite material,” Russ. Metall. 2018, 1189–1194 (2018).CrossRef

12.

Ya. Kurganova, Yu. Lopatina, and C. Yijin, “Evaluation of filler distribution in particulate reinforced composites,” J. Mater. Sci. Eng. 3, 108–112 (2015).

13.

V. A. Prokof’ev M. N. Tolmachev, and M. V. Golovko., “Issues of estimation and normalization of the coefficient of variationi,” Vopr. Ekon. Prava, No. 112, 34—37 (2017).

Title: Evaluation of Uniformity of Particle Distribution in Composite Materials Based on Molded Polyurethanes
Authors: R. A. Alekhina
S. P. Tuzhilin
A. S. Sviridov
Yu. A. Goncharova
Publication date: 01-12-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223040020

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2023

Study of the Kinetics of the Interaction Process of Material of “Liquid” Phase and Epoxy Binder

Mechanism of Cumene Oxidation into Cumene Hydroperoxide (Curing Initiator for Acrylic Adhesives) in the Presence of Ca, Sr, Ba Chloride Complex with Dibenzo-18-Crown-6 Ether

Kinetic Modeling of Synthesis of Cumene Hydroperoxide (a Curing Initiator for Acrylic Glues) in the Presence of Mg, Ca, Sr, or Ba 2-Ethylhexanoate as a Catalyst

The Effect of the Structure of Heterocyclic Monomers on the Heat Resistance of Epoxy Adhesives

The Influence of the Content of Halogen-Containing Oligomer in the Composition of VSK-14-6 Adhesive Binder on the Kinetics of the Curing Process of Prepregs on Different Fillers and a Comparative Analysis of the Curing Kinetics of Prepregs Based on VSK-14-1 Adhesive Binder

Application of Various Brands of Silica Fillers in the Formulation of Treads of Car Tires

Premium Partners