Top

Polymer Science, Series D

Published in:

01-12-2023

Study of the Kinetics of the Interaction Process of Material of “Liquid” Phase and Epoxy Binder

Authors: E. A. Kosenko, V. A. Nelyub, N. I. Baurova

Published in: Polymer Science, Series D | Issue 4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Results of experimental studies of the kinetics of the curing process of an epoxy binder when using an additional material in its composition, which ensures the redistribution and relaxation of stresses and, as a consequence, a significant increase in strength under long-term exposure to alternating loads, are presented. Such a material is called in the work a “liquid” phase material, for which triethylene glycol dimethacrylate and silicone sealant are used.

previous article A Theoretical and Experimental Study of Spindle Assembly Rigidity with a Polymer Interlayer in Supports of a Metalworking Machine

next article Kinetic Modeling of Synthesis of Cumene Hydroperoxide (a Curing Initiator for Acrylic Glues) in the Presence of Mg, Ca, Sr, or Ba 2-Ethylhexanoate as a Catalyst

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

P. A. Morozova, I. Yu. Gorbunova, S. V. Polunin, A. M. Arutyunova, and Yu. V. Tukan, “Study of the properties of binders based on epoxy resin modified with polyethersulfone,” Usp. Khim. Khim. Tekhnol. 35, 44–46 (2021).

S. S. Marakhovsky, N. V. Kostromina, Yu. V. Olikhova, T. P. Kravchenko, and I. Yu. Gorbunova, “Binders for carbon plastics based on epoxy oligomers modified with thermoplastics,” Klei. Germetiki. Tekhnol., No. 5, 18–22 (2021).

R. I. Sopotov, S. V. Zyukin, I. Yu. Gorbunova, M. L. Kerber, Yu. E. Doroshenko, T. P. Kravchenko, V. I. Ilyin, and S. Yu. Tuzova, “Rheokinetics of curing of epoxy oligomer ED-20 modified with polysulfone and polyetherimide,” Plast. Massy, Nos. 11–12, 7–9 (2015).

T. A. Akopova, V. S. Osipchik, Yu. V. Olikhova, T. P. Kravchenko, and L. H. Nguyen, “Modification of an epoxy composition with oligosilsesquioxanes,” Plast. Massy, Nos. 1–2, 41–44 (2015).

A. I. Vyalov, A. A. Shcherbina, I. Yu. Gorbunova, Yu. V. Olikhova, O. I. Loban, and V. A. Dyakonov, “Study of the influence of modification on the rheokinetics of curing of an epoxyamine composition using rheometry and differential scanning calorimetry,” Plast. Massy, Nos. 5–6, 13–15 (2022).

L. P. Kobets, A. S. Borodulin, and G. V. Malysheva, “Study of microcapillary impregnation of carbon fiber by epoxy binder,” Fiber Chem. 48, 311–315 (2016).CrossRef

P. P. Maung, T. L. Htet, and G. V. Malysheva, “Simulation and optimization of vacuum assisted resin infusion process for large-sized structures made of carbon fiber-reinforced plastic,” JOP Conf. Ser.: Mater. Sci. Eng. 709, 022041 (2020).

V. A. Nelyub, B. L. Gorberg, M. V. Grishin, A. A. Berlin, and G. V. Malysheva, “Properties and technology of applying metal coatings to carbon tape,” Fiber Chem. 50, 524–527 (2019).CrossRef

N. I. Baurova, “A method of simulation modeling that allows optimizing the properties of polymeric composite materials,” Polym. Sci., Ser. D 6, 265–268 (2013).

10.

P. A. Belov, A. S. Borodulin, L. P. Kobets, and G. V. Malysheva, “Kinetics of fiber impregnation by a binder. Gradient generalization of Navier-Stokes-Darcy equations,” Polym. Sci., Ser. D 9, 205–208(2016).

11.

A. N. Marycheva, T. A. Guzeva, P. M. Pe, L. K. Tun, and G. V. Malysheva, “Reinforcing fillers for polymer composite based on organic unwoven materials,” Polym. Sci., Ser. D 12, 170–173 (2019).

12.

C. Yangyang and G. Malysheva, “Method for determining the rational regimes of curing products from polymer composite materials,” Mater. Today: Proceed. 11, 128–133 (2019).

13.

C. Yanyan, V. A. Nelyub, and G. V. Malysheva, “An investigation of the kinetics of the heating process for parts made of carbon fiber in the process for parts made of carbon fiber in the process of curing,” Polym. Sci., Ser. D 12, 296–299 (2019).

14.

E. A. Kosenko, N. I. Baurova, and V. A. Zorin, “The development of natural-like polymer composite materials with liquid matrix and their use in mechanical engineering,” Polym. Sci., Ser. D 13, 341–344 (2020).

15.

A. A. Berlin, “On the fatigue strength of natural materials,” Vse Mater. Entsiklopedicheskii Spravochnik, No. 7, 2–3 (2019).

16.

E. A. Kosenko, N. I. Baurova, and V. A. Zorin, Nature-Like Materials and Structures in Mechanical Engineering: Monograph (Mosk. Avtomob. Dorozh. Inst., Moscow, 2020) [in Russian].

Title: Study of the Kinetics of the Interaction Process of Material of “Liquid” Phase and Epoxy Binder
Authors: E. A. Kosenko
V. A. Nelyub
N. I. Baurova
Publication date: 01-12-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223040172

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2023

Some Aspects of the Generalized Energy Approach to the Processes of Destruction of Materials

A Melamine Polyphosphate-Filled Thermoprotective Coating Based on Polyetherurethane Rubber and Chlorinated Epoxy Oligomers

A Study of the Influence of Bis-Maleimides on the Properties of Oligoestermaleinates

Properties of Polymers Obtained by the Mechanism of Anionic Polymerization of Epoxy Resins under the Action of Imidazoles

Automated Dosing Equipment for Triplex Production by the Pouring Method

Ultrasonic Technologies in Producing Adhesive Joints: A Review

Premium Partners