Top

Polymer Science, Series D

Published in:

01-12-2023

The Influence of the Content of Halogen-Containing Oligomer in the Composition of VSK-14-6 Adhesive Binder on the Kinetics of the Curing Process of Prepregs on Different Fillers and a Comparative Analysis of the Curing Kinetics of Prepregs Based on VSK-14-1 Adhesive Binder

Authors: N. V. Antyufeeva, A. I. Starkov

Published in: Polymer Science, Series D | Issue 4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Using the differential scanning calorimetry method, the influence of the halogen-containing oligomer in the composition of VSK-14-6 adhesive binder on the kinetics of the curing process of prepregs on different fillers was studied and a comparative analysis of the curing kinetics of prepregs based on VSK-14-1 adhesive binder, which does not contain bromine is presented. The calculated kinetic parameters of the curing process of binders in prepregs are presented. The influence of bromine content in the binder composition on the curing process of prepregs is shown.

previous article Methodological Aspects of Determining Fiber—Matrix Adhesive Strength by Pushing out Monofilament with an Indenter

next article Mechanism of Cumene Oxidation into Cumene Hydroperoxide (Curing Initiator for Acrylic Adhesives) in the Presence of Ca, Sr, Ba Chloride Complex with Dibenzo-18-Crown-6 Ether

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

E. N. Kablov, “What will the future be made of? New generation materials, technologies for their creation and processing are the basis of innovation,” Kryl’ya Rodiny, No. 5, 8–18 (2016).

E. N. Kablov and V. O. Startsev, “Systematic analysis of the influence of climate on the mechanical properties of polymer composite materials based on data of Russian and foreign sources (review),” Aviats. Mater. Tekhnol., No. 2, 47–58 (2018). https://doi.org/10.18577/2071-9140-2018-0-2-47-58

E. N. Kablov, V. O. Startsev, and A. A. Inozemtsev, “Moisture saturation of structural-like elements made of polymer composite materials in open climatic conditions with superimposed thermal cycles,” Aviats. Mater. Tekhnol., No. 2, 56–68 (2017). https://doi.org/10.18577/2071-9140-2017-0-2-56-68

A. P. Petrova and G. V. Malysheva, Adhesive, Adhesive Binder, and Adhesive Prepregs, Ed. by E. N. Kablov (VIAM, Moscow, 2017) [in Russian].

A. I. Starkov, K. E. Kutsevich, T. Yu. Tyumeneva, and A. P. Petrova, “Low-flammability adhesive prepregs intended for the manufacture of integral and three-layer honeycomb structures of aircraft,” Trudy VIAM, No. 5, 04 (2022). https://doi.org/10.18577/2307-6046-2022-0-5-41-52

A. I. Starkov, K. E. Kutsevich, T. Yu. Tyumeneva, “Development of a composite adhesive material based on alternative carbon tow filler brand UMT49S-12K-EP and adhesive binder brand VSK-14-3,” Trudy VIAM, Nos. 6–7, 07 (2020). https://doi.org/10.18577/2307-6046-2020-0-67-62-71

N. V. Antyufeeva, V. M. Aleksashin, and Yu. V. Stolyankov, “Modern methodological support for thermoanalytical studies of polymer composites and prepregs,” Kompozity Nanostrukt. 6, 176–184 (2014).

K. E. Kutsevich, V. M. Aleksashin A. P. Petrova, and N. V. Antyufeeva, “Study of the kinetics of the curing reaction of adhesive binders,” Klei. Germetiki. Tekhnol., No. 11, 27–31 (2014).

V. I. Postnov, S. M. Kachura, and E. A. Veshkin, “Modeling the curing process of a polymer binder and changes in microhardness in its volume,” Trudy VIAM, No. 4, 07 (2021). https://doi.org/10.18577/2307-6046-2021-0-4-92-99.

10.

M. A. Khaskov, D. A. Mel’nikov, and E.V. Kotova, “Selection of temperature and time regimes for curing epoxy binders, taking into account the scale factor,” Klei. Germetiki. Tekhnol., No. 10, 24–32 (2017).

11.

M. A. Khaskov, “Extension of the time–temperature–transformation diagram taking into account thermal properties of components for optimizing the curing of polymer matrix composites,” Russ. J. Appl. Chem. 89, 622–630 (2016).CrossRef

12.

D. A. Mel’nikov, M. A. Khaskov, M. A. Guseva, and N. V. Antyufeeva, “On the issue of developing pressing modes for layered PCM based on prepregs,” Trudy VIAM, No. 2, 09 (2018). https://doi.org/10.18577/2307-6046-2018-0-2-9-9

13.

G. F. Zhelezina, “Structural and functional organoplastics of a new generation,” Trydy VIAM, No, 4, o07 (2013).

14.

G. F. Zhelezina, I. N. Gulyaev, and N. A. Solov’eva, “New generation aramid organoplastics for aircraft structures,” Aviats. Mater. Tekhnol., No. S, 368–378 (2017). https://doi.org/10.18577/2071-9140-2017-0-S-368-378

15.

G. F. Zhelezina, S. I. Voinov, T. D. Karimbaev, and A. A. Chernyshev, “Aramid organoplastics for aircraft engine fan housings,” Vopr. Materialoved., No. 32. 153–165 (2017).

16.

M. F. Grenier-Loustalot, M. P. Bente, and Ph. Grenier, “Reactivite du dicyandiamide vis a vis des groupements et n-epoxide-1. Mechanism reactionnel,” Eur. Polym. J. 27, 1201–1216 (1991).CrossRef

Title: The Influence of the Content of Halogen-Containing Oligomer in the Composition of VSK-14-6 Adhesive Binder on the Kinetics of the Curing Process of Prepregs on Different Fillers and a Comparative Analysis of the Curing Kinetics of Prepregs Based on VSK-14-1 Adhesive Binder
Authors: N. V. Antyufeeva
A. I. Starkov
Publication date: 01-12-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223040032

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2023

Stability in Supersonic Flow of Complex-Shaped Composites Based on Reinforced Inorganic and Cold-Curing Hybrid Binders

Film Formers Based on Plant Raw Materials for Polyurethane Coatings: A Review

Properties of Polymers Obtained by the Mechanism of Anionic Polymerization of Epoxy Resins under the Action of Imidazoles

A Study of the Influence of Negative Temperatures on the Impact Strength of a Carbon-Fiber Composite with a Hybrid Matrix

Modern Phenolic Adhesives for Aviation and Engineering. Part 2. Chemical Modification

Prediction of Electrophysical Properties of Organic-Inorganic Composite Materials

Premium Partners