Top

Polymer Science, Series D

Published in:

01-12-2023

Methodological Aspects of Determining Fiber—Matrix Adhesive Strength by Pushing out Monofilament with an Indenter

Authors: A. I. Gulyaev, S. V. Sbitneva, D. V. Zaitsev, P. N. Medvedev

Published in: Polymer Science, Series D | Issue 4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The results of determining the fiber–matrix adhesive strength by the method of pushing out a monofilament with an indenter for various grades of carbon fiber plastics have been presented. The factors influencing the correctness of obtaining experimental data have been considered. It has been shown that the fiber–matrix adhesive strength determined by this method can be considered as a size-independent quantity.

previous article Ultrasonic Technologies in Producing Adhesive Joints: A Review

next article The Influence of the Content of Halogen-Containing Oligomer in the Composition of VSK-14-6 Adhesive Binder on the Kinetics of the Curing Process of Prepregs on Different Fillers and a Comparative Analysis of the Curing Kinetics of Prepregs Based on VSK-14-1 Adhesive Binder

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

A. E. Raskutin, “Strategy for the development of polymer composite materials,” Aviats. Mater. Tekhnol., No. S, 344–348 (2017). https://doi.org/10.18577/2071-9140-2017-0-S-344-348

E. N. Kablov, M. I. Valueva, I. V. Zelenina, V. V. Khmelnitsky, and V. M. Aleksashin, “Carbon plastics based on benzoxazine oligomers–promising materials,” Trudy VIAM, No. 1, 68–77 (2020). https://doi.org/10.18577/2307-6046-2020-0-1-68-77

E. N. Kablov, L. V. Chursova, N. F. Lukina, K. E. Kutsevich, E. V. Rubtsova, and A. P. Petrova, “Study of epoxy-polysulfone polymer systems as the basis for high-strength aviation adhesives,” Klei. Germetiki. Tekhnol., No. 3. P. 7–12 (2017).

E. N. Kablov, G. S. Kulagina, G. F. Zhelezina, S. L. Lonsky, and E. V. Kurshev, “Study of the microstructure of unidirectional organoplastic based on Rusar-NT aramid fibers and epoxy-polysulfone binder,” Aviats. Mater. Tekhnol., No. 4, 19–26 (2020). https://doi.org/10.18577/2071-9140-2020-0-4-19-26

P. G. Belinis, K. I. Donetsky, Yu. V. Lukyanenko, V. N. Rogozhnikov, Yu. Mayer, and D. V. Bystrikova, “Volume-reinforcing seamless preforms for the manufacture of polymer composite materials (review),” Aviats. Mater. Tekhnol., No. 4, 18–26 (2019). https://doi.org/10.18577/2071-9140-2019-0-4-18-26

A. I. Sidorina, “Modification of the surface of carbon reinforcing fillers for polymer composite materials by electrochemical processing (review),” Trudy VIAM, No. 4, 07 (2022). https://doi.org/10.18577/2307-6046-2022-0-4-61‑74

A. R. Garifullin and I. Sh. Abdullin, “Current state of the problem of surface treatment of carbon fibers for their subsequent use in polymer composites as a reinforcing element,” Vestn. Kazan Tekhnol. Univ., No. 7, 80–85 (2014).

J. Karger-Kocsis, H. Mahmood, and A. Pegoretti, “Recent advances in fiber/matrix interphase engineering for polymer composites,” Prog. Mater. Sci. 73, 1–43 (2015).CrossRef

J. D. H. Hughes, “The carbon fibre/epoxy interface–a review,” Compos. Sci. Technol. 41, 13–45 (1991).CrossRef

10.

J.-K. Kim and Y.-W. Mai, Engineered Interfaces in Fiber Reinforced Composites (Elsevier, Oxford, 1998).

11.

V. A. Nelyub and P. A. Belov, “Methods for increasing the resistance of carbon fiber plastics to delamination by controlling the adhesion of the fiber to the matrix,” Nov. Mater. Nauka Tekh., No. 5, 3 (2013).

12.

M. Nardin and J. Schultz, “Relationship between fibre-matrix adhesion and the interfacial shear strength in polymer-based composites,” Compos. Interfaces 1, 177–192 (1993).CrossRef

13.

R. Plonka, E. Mader, S. L. Gao, C. Bellmann, V. Dutschk, and S. Zhandarov, “Adhesion of epoxy/glass fibre composites influenced by aging effects on sizings,” Composites, Part A 35, 1207–1216 (2004).CrossRef

14.

T. Yang, Y. Zhao, H. Liu, M. Sun, and S. Xiong, “Effect of sizing agents on surface properties of carbon fibers and interfacial adhesion of carbon fiber/bismaleimide composites,” ACS Omega 6, 23028–23037 (2021).CrossRefPubMedPubMedCentral

15.

Yu. A. Gorbatkina, Adhesive Strength in Polymer-Fiber Systems (Khimiya, Moscow, 1987) [in Russian].

16.

O. V. Akhmatova, Yu. A. Gorbatkina, I. Yu. Gorbunova, V. G. Ivanova-Mumzhieva, and M. L. Kerber, “The influence of nano-sized clay particles and thermoplastic modifier on the adhesive strength of epoxyamine binder compounds with fibers,” Plast. Massy, No. 10, 31–35 (2012).

17.

Yu. A. Gorbatkina, V. G. Ivanova-Mumzhieva, and A. M. Kuperman, “Adhesion of modified epoxy matrices to reinforcing fibers,” Polym. Sci., Ser. A 58, 659–666 (2016)CrossRef

18.

A. Yu. Sergeev, R. A. Turusov, and N. I. Baurova, “Determination of the adhesive strength of joints using the example of testing samples by pulling fibers out of the matrix,” Kompoz. Nanostruktury, No. 1, 52–62 (2017).

19.

A. S. Borodulin, V. V. Mal’tsev, A. A. Bertaeva, S. Yu. Fedorov, A. G. Tereshkov, V. A. Nelyub, and G. V. Malysheva, “Methodology for assessing the adhesive strength of an elementary fiber-epoxy matrix system,” Klei. Germetiki. Tekhnol., No. 5, 32–38 (2022).

20.

Z. Dai, F. Shi, B. Zhang, M. Li, and Z. Zhang, “Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion,” Appl. Surf. Sci. 257 6980–6985 (2011).CrossRef

21.

S. Tamrakar, B. Z. Haque (Gama), and J. W. Gillespie, “High rate test method for fiber-matrix interface characterization,” Polym. Test. 52, 174–183 (2016).CrossRef

22.

A. I. Gulyaev, “Measuring fiber-matrix adhesive strength using nanoindentation (review),” Trudy VIAM, No. 3, 08 (2019). https://doi.org/10.18577/2307-6046-2019-0-3-8-8

23.

Yu. I. Golovin, “Nanoindentation and mechanical properties of materials at submicro- and nanoscale levels: recent results and achievements,” Phys. Solid State 63, 1–41 (2021).CrossRef

24.

J. M. Molina-Aldareguia, M. Rodriguez, C. Gonzalez, and J. Lorca, “An experimental and numerical study of the influence of local effects on the application of the fibre push-in test,” Phil. Mag. 91, 1293–1307 (2011).CrossRef

25.

A. Godara, L. Gorbatikh, G. Kalinka, A. Warrier, O. Rochez, L. Mezzo, F. Luizi, A. W. van Vuure, S. V. Lomov, and I. Verpoest, “Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes,” Compos. Sci. Technol. 70, 1346–1352 (2010).CrossRef

26.

J. Jager, M. G. R. Sause, F. Burkert, J. Moosburger-Will, M. Greisel, and S. Horn, “Influence of plastic deformation on single-fiber push-out tests of carbon fiber reinforced epoxy resin,” Composites, Part A 71, 157–167 (2015).CrossRef

27.

S. C. Gallo, X. Li, Z. Zhang, C. Charitidis, and H. Dong, “Viscoelastic response of carbon fibre reinforced polymer during push-out tests,” Composites, Part A 112, 178–185 (2018).CrossRef

28.

A. I. Gulyaev, P. N. Medvedev, S. V. Sbitneva, and A. A. Petrov, “Experimental study to assess the adhesive strength of fiber-matrix in carbon fiber reinforced plastics based on epoxy binder modified with polysulfone,” Aviats. Mater. Tekhnol., No. 4, 80–86 (2019). https://doi.org/10.18577/2071-9140-2019-0-4-80-86

29.

A. Ya. Gorenberg, Yu. A. Gorbatkina, and V. G. Ivanova-Mumzhieva, “Evaluation of interfacial strength during adhesion of polymers to fibers with a rough surface,” Klei. Germetiki. Tekhnol., No. 3, 36–41 (2021).

Title: Methodological Aspects of Determining Fiber—Matrix Adhesive Strength by Pushing out Monofilament with an Indenter
Authors: A. I. Gulyaev
S. V. Sbitneva
D. V. Zaitsev
P. N. Medvedev
Publication date: 01-12-2023
Publisher: Pleiades Publishing
Published in: Polymer Science, Series D / Issue 4/2023
Print ISSN: 1995-4212
Electronic ISSN: 1995-4220
DOI: https://doi.org/10.1134/S1995421223040123

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2023

Mechanism of Cumene Oxidation into Cumene Hydroperoxide (Curing Initiator for Acrylic Adhesives) in the Presence of Ca, Sr, Ba Chloride Complex with Dibenzo-18-Crown-6 Ether

A Study of the Structure and Thermodynamic Properties of Polyvinyl Acetate Dispersion after Microwave Electromagnetic Treatment

Application of Various Brands of Silica Fillers in the Formulation of Treads of Car Tires

Estimating the Fuel Permeability of Thermoplastic Polyurethane from the Saturated Vapor Pressure of Kerosene

Evaluation of Uniformity of Particle Distribution in Composite Materials Based on Molded Polyurethanes

Studying the Rheokinetics of Curing Processes in Epoxy Amine Binders Modified with Carding Polysulfon

Premium Partners