Top

The International Journal of Advanced Manufacturing Technology

Published in:

18-08-2022 | Critical Review

Research progress of surface modification and solid–liquid lubrication synergistic friction reduction and wear resistance

Authors: Keyang Chen, Xuefeng Yang, Guojie Lv, Yifeng Zhang, Hui Yang, Yalong Gao

Published in: The International Journal of Advanced Manufacturing Technology | Issue 3-4/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Friction and wear is a common phenomenon in production and life, and it is also a problem that cannot be eliminated. Friction has a positive side, but it also brings many problems, and the positive side should be used. Tribology is a subject specializing in the study of friction, wear, and lubrication. In recent years, after the joint research of scholars from all over the world, fruitful results have been achieved in the research of tribology in the fields of manufacturing, materials, and medicine. This paper firstly introduces the friction and wear problems in today's world, as well as the economic and environmental problems brought about, and shows the research status and its far-reaching influence in various fields; film technology and lubrication technology were analyzed, the working mechanism of each technology was explained, and the advantages and disadvantages of each technology were shown; the synergy brought about by the combined use of various technologies was mainly discussed, and the synergy of each technology was demonstrated by examples. The advantages of solving the tribological problems at the current stage, the combined use of two or more technologies can make up for each other to a certain extent. Finally, the full text is summarized and the prospect of multi-technology collaboration is prospected.

next article Incorporation of machine learning in additive manufacturing: a review

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Jost HP (1990) Tribology - origin and future. Wear 136:1–17. https://doi.org/10.1016/0043-1648(90)90068-LCrossRef

Ciulli E (2019) Tribology and industry: From the Origins to 4.0. Frontiers in Mechanical Engineering 5:1–12. https://doi.org/10.3389/fmech.2019.00055CrossRef

Findik F (2014) Latest progress on tribological properties of industrial materials. Mater Des 57:218–244. https://doi.org/10.1016/j.matdes.2013.12.028CrossRef

Arif T, Wang GR, Sodhi RNS, Colas G, Filleter T (2021) Role of chemical vs. physical interfacial interaction and adsorbed water on the tribology of ultrathin 2D-material/steel interfaces. Tribol Int 163:107194. https://doi.org/10.1016/j.triboint.2021.107194

Wang JD, Cheng C, Zeng XT, Zheng J, Zhou ZR (2020) Bionic-tribology design of tooth surface of grinding head based on the bovine molar. Tribol Int 143:106066. https://doi.org/10.1016/j.triboint.2019.106066CrossRef

Friedrich K (2018) Polymer composites for tribological applications. Advanced Industrial and Engineering Polymer Research 1:3–39. https://doi.org/10.1016/j.aiepr.2018.05.001CrossRef

Vakis AI, Yastrebov VA, Scheibert J, Nicola L, Dini D, Minfray C, Almqvist A, Paggi M, Lee S, Limbert G, Molinari JF, Anciaux G, Aghababaei R, Echeverri Restrepo S, Papangelo A, Cammarata A, Nicolini P, Putignano C, Carbone G, Stupkiewicz S, Lengiewicz J, Costagliola G, Bosia F, Guarino R, Pugno NM, Müser MH, Ciavarella M (2018) Modeling and simulation in tribology across scales: an overview. Tribol Int 125:169–199. https://doi.org/10.1016/j.triboint.2018.02.005CrossRef

Sundus F, Fazal MA, Masjuki HH (2017) Tribology with biodiesel: a study on enhancing biodiesel stability and its fuel properties. Renew Sustain Energy Rev 70:399–412. https://doi.org/10.1016/j.rser.2016.11.217CrossRef

Padhan M, Marathe U, Bijwe J (2020) Tribology of Poly(etherketone) composites based on nano-particles of solid lubricants. Compos B 201:108323. https://doi.org/10.1016/j.compositesb.2020.108323CrossRef

10.

Ning K, Wang JM, Shi MJ, Ning WG, Zhang F (2021) Friction-increasing mechanism of contact pair using different surface treatment processes. Tribol Int 165:107337. https://doi.org/10.1016/j.triboint.2021.107337CrossRef

11.

Rodrigues TA, Costa HL, da Silva WM Jr (2021) Sliding wear behavior of electrochemically textured surfaces under different lubrication regimes: Effects of curvature radius. Wear 477:203817. https://doi.org/10.1016/j.wear.2021.203817CrossRef

12.

WollmannT NS, Klauke T, Behnisch T, Ebert C, Füßel R, Modler N, Gude M (2021) Investigating the friction, wear and damage behaviour of plain bearing bushes of the variable stator vane system. Tribol Int 165:107280. https://doi.org/10.1016/j.triboint.2021.107280CrossRef

13.

Zakari A, Khan I, Tan D, Alvarado R, Dagar V (2021) Energy efficiency and sustainable development goals (SDGs). Energy 239:122356. https://doi.org/10.1016/j.energy.2021.122365CrossRef

14.

Liao C, Erbaugh JT, Kelly AC, Agrawal A (2021) Clean energy transitions and human well-being outcomes in lower and middle income countries: a systematic review. Renew Sust Energ Rev 145:111036. https://doi.org/10.1016/j.rser.2021.111063

15.

Poudyal R, Loskot P, Nepal R, Parajuli R, Khadka SK (2019) Mitigating the current energy crisis in Nepal with renewable energy sources. Renew Sust Energ Rev 116:109338. https://doi.org/10.1016/j.rser.2019.109388CrossRef

16.

Woydt M (2021) The importance of tribology for reducing CO₂ emissions and for sustainability. Wear 474–475:203768. https://doi.org/10.1016/j.wear.2021.203768CrossRef

17.

Holmberg K, Erdemir A (2017) Influence of tribology on global energy consumption, costs and emissions. Friction 5:263–284. https://doi.org/10.1007/s40544-017-0183-5CrossRef

18.

Dong ZY, Yang JJ, Yu L, Daiyan R, Amal R (2021) A green hydrogen credit framework for international green hydrogen trading towards a carbon neutral future. Int J Hydrogen Energy 47:728–734. https://doi.org/10.1016/j.ijhydene.2021.10.084CrossRef

19.

Zhang SC, Wang K, Xu W, Iyer-Raniga U, Athienitis A, Ge H, Cho DW, Feng W, Okumiya M, Yoon G, Mazria E, Lyu Y (2021) Policy recommendations for the zero energy building promotion towards carbon neutral in Asia-Pacific Region. Energy Policy 159:112661. https://doi.org/10.1016/j.enpol.2021.112661CrossRef

20.

Erdogan A, Gok MS, Koç V, Günen A (2019) Friction and wear behavior of epoxy composite filled with industrial wastes. J Clean Prod 237:117588. https://doi.org/10.1016/j.jclepro.2019.07.063CrossRef

21.

Montmit P, Felder E (2012) Introduction to tribology in manufacturing processes. Wear 286–287:1–2. https://doi.org/10.1016/j.wear.2011.11.009CrossRef

22.

Karpat Y (2021) Investigating flank face friction during precision micro cutting of commercially pure titanium via plunging tests with diamond grooving tools. J Mater Process Technol 299:117376. https://doi.org/10.1016/j.jmatprotec.2021.117376CrossRef

23.

Wang LW, Sheng XY (2020) Friction and wear performance of sliding bearing seat of reactor pressure vessel. Wear 444–445:203167. https://doi.org/10.1016/j.wear.2019.203167CrossRef

24.

Dawari CK, Haq I, Mönkkönen K, Suvanto M, Saarinen JJ (2021) Reduced sliding friction on flat and microstructured metal injection molded (MIM) WC-Co hard metals with MoS₂ composite lubricants. Tribol Int 160:107020. https://doi.org/10.1016/j.triboint.2021.107020CrossRef

25.

Wang SY, Zhu RP (2022) An improved mesh stiffness model of helical gear pair considering axial mesh force and friction force influenced by surface roughness under EHL condition. Appl Math Model 102:453–471. https://doi.org/10.1016/j.apm.2021.10.007MathSciNetCrossRef

26.

Lin RF, Guo WZ (2022) Type synthesis of reconfiguration parallel mechanisms transforming between trusses and mechanisms based on friction self-locking composite joints. Mech Mach Theory 168:104579. https://doi.org/10.1016/j.mechmachtheory.2021.104597CrossRef

27.

Rudge RE, Scholten E, Dijksman JA (2019) Advances and challenges in soft tribology with applications to foods. Curr Opin Food Sci 27:90–97. https://doi.org/10.1016/j.cofs.2019.06.011CrossRef

28.

Zheng Y, Bashandeh K, Shakil A, Jha S, Polycarpou AA (2021) Review of dental tribology: current status and challenges. Tribol Int 166:107354. https://doi.org/10.1016/j.triboint.2021.107354CrossRef

29.

Jin ZM, Zheng J, Lia W, Zhou ZR (2016) Tribology of medical devices. Biosurf Biotribol 2:173–192. https://doi.org/10.1016/j.bsbt.2016.12.001CrossRef

30.

Prakash S, Daniel D, Chen JS (2013) Applications of tribology in studying food oral processing and texture perception. Food Res Int 54:1627–1635. https://doi.org/10.1016/j.foodres.2013.10.010CrossRef

31.

Wei B, Yan L, Jiang LZ, Hu ZL, Li SS (2021) Errors of structural seismic responses caused by frequency filtering based on seismic wave synthesis. Soil Dyn Earthq Eng 149:10862. https://doi.org/10.1016/j.soildyn.2021.106862CrossRef

32.

Farfan-Cabrera LI (2019) Tribology of electric vehicles: a review of critical components. current state and future improvement trends. Tribol Int 138:473–486. https://doi.org/10.1016/j.triboint.2019.06.029CrossRef

33.

Wen HX, Sun JJ, Chen W (2016) Tribological study of the key friction pairs materials under seawater: status quo and prospects. J Mech Eng 30:85–112. https://doi.org/10.11896/j.issn.1005-023X

34.

Chen W, Wang K, Liu X, He NR, Xin H, Hao WH (2019) Investigation of the friction and wear characteristics of Si₃N₄-hBN ceramic composites under marine atmospheric environment. Int J Refract Metal Hard Mater 81:345–357. https://doi.org/10.1016/j.ijrmhm.2019.03.014CrossRef

35.

Wang GR, Liao DS, Jiang SK, He X, Zhong L, Jiang L, Liang HC (2018) Research progress of bionic surface texture and its application prospect in oil and gas equipment field. Surf Technol 47:14–22. https://doi.org/10.16490/j.cnki.issn.1001-3660.2018.08.003

36.

Luo JB, Liu M, Ma LR (2021) Origin of friction and the new frictionless technology—superlubricity: advancements and future outlook. Nano Energy 86:106092. https://doi.org/10.1016/j.nanoen.2021.106092CrossRef

37.

Wang BX, Qui F, Barber GC, Zou Q, Wang J, Guo SY, Yuan YF, Jiang QC (2021) Role of nano-sized materials as lubricant additives in friction and wear reduction: A review. Wear 490–491:204206. https://doi.org/10.1016/j.wear.2021.204206CrossRef

38.

Chen KY, Yang XF, Zhang YF, Yang H, Lv GJ, Gao YL (2021) Research progress of improving surface friction properties by surface texture technology. Int J Adv Manuf Tech 116:2797–2821. https://doi.org/10.1007/s00170-021-07614-1CrossRef

39.

Yan GH, Lu SL, Zhang ML, Wang JC, Yang XD, Zhang ZY, Gu JF, Li CW (2020) Wear and corrosion behavior of P20 steel surface modified by gas nitriding with laser surface engineering. Appl Surf Sci 530:147306. https://doi.org/10.1016/j.apsusc.2020.147306CrossRef

40.

Tsyganov VV, Sheiko S (2021) Features of engineering the wear-resistant surface of parts with the multicomponent dynamic load. Wear 494–495:204255. https://doi.org/10.1016/j.wear.2022.204255CrossRef

41.

Yin M, Hou LF, Wang ZW, Bao TY, Liu BS, Wei H, Liu XD, Du HY, Wei YH (2021) Self-generating construction of applicable corrosion-resistant surface structure of magnesium alloy. Corros Sci 184:109378. https://doi.org/10.1016/j.corsci.2021.109378CrossRef

42.

Bai HQ, Zhong LS, Kang L, Liu JB, Zhuang WJ, Lv ZL, Xu YH (2021) A review on wear-resistant coating with high hardness and high toughness on the surface of titanium alloy. J Alloy Compd 882:160645. https://doi.org/10.1016/j.jallcom.2021.160645CrossRef

43.

Hou QM, Yang XF, Li D, Cheng J, Wang SR, Xiao JP, Li WY (2022) Tribological performance of hydrophobic and micro/nano triangle textured rake face of cutting tools. Appl Surf Sci 571:151250. https://doi.org/10.1016/j.apsusc.2021.151250CrossRef

44.

Cao QH, Wang ZS, He WT, Guan YC (2021) Fabrication of super hydrophilic surface on alumina ceramic by ultrafast laser microprocessing. Appl Surf Sci 557:149842. https://doi.org/10.1016/j.apsusc.2021.149842CrossRef

45.

Brown PS, Wood TJ, Badyal JPS (2021) Combining plasmachemical emulsion-templating with ATRP to create macroporous lipophilic surfaces. J Colloid Interface Sci 421:44–48. https://doi.org/10.1016/j.jcis.2014.01.019CrossRef

46.

Wang Y, Fan Y, Zhang P, Tian LM, Xu JN, Niu SC, Ren LQ, Zhao J (2021) Dynamically oleophobic epoxy coating with surface enriched in silicone. Prog Org Coat 154:106170. https://doi.org/10.1016/j.porgcoat.2021.106170CrossRef

47.

Sang LV, Sugimura N, Washizu H (2021) Graphene as solid lubricant vertically buried into iron contact surface by annealing for superlubricity. Tribol Int 165:107288. https://doi.org/10.1016/j.triboint.2021.107288CrossRef

48.

Permyakova ES, Manakhov AM, Kiryukhantsev-Korneev PV, Sheveyko AN, Gudz KY, Kovalskii AM, Polčak J, Zhitnyak IY, Gloushankova NA, Dyatlov IA, Ignatov SG, Ershov S, Shtansky DV (2021) Different concepts for creating antibacterial yet biocompatible surfaces: Adding bactericidal element, grafting therapeutic agent through COOH plasma polymer and their combination. Appl Surf Sci 556:149751. https://doi.org/10.1016/j.apsusc.2021.149751CrossRef

49.

Choi S, Kamikawa Y, Nishinaga J, Yamada A, Shibata H, Niki S (2018) Lithographic fabrication of point contact with Al2O3 rear-surface-passivated and ultra-thin Cu (In, Ga)Se2 solar cells. Thin Solid Films 665:91–95. https://doi.org/10.1016/j.tsf.2018.08.044CrossRef

50.

Ghate ND, Shrivastava A (2021) Numerical and experimental investigation of complex surface topography evolution during laser surface modification with raster scan. J Manuf Process 69:368–337. https://doi.org/10.1016/j.jmapro.2021.08.010CrossRef

51.

Vishnoi M, Kumar P, Murtaza K (2021) Surface texturing techniques to enhance tribological performance: a review. Surf Interfaces 27:101463. https://doi.org/10.1016/j.surfin.2021.101463CrossRef

52.

Mozetič M, Vesel A, Primc G, Eisenmenger-Sittner C, Bauer J, Eder A, Schmid GHS, Ruzic DN, Ahmed Z, Barker D, Douglass KO, Eckel S, Fedchak JA, Hendricks J, Klimov N, Ricker J, Scherschligt J, Stone J, Strouse G, Capan I, Buljan M, Milošević S, Teichert C, Cohen SR, Silva AG, Lehocky M, Humpoliček P, Rodriguez C, Hernandez-Montelongo J, Mercier D, Manso-Silván M, Ceccone G, Galtayries A, Stana-Kleinschek K, Petrov I, Greene JE, Avila J, Chen CY, Caja-Munoz B, Yi H, Boury A, Lorcy S, Asensio MC, Bredin J, Gans T, O’Connell D, Brendin J, Reniers F, Vincze A, Anderle M, Montelius L (2018) Recent developments in surface science and engineering, thin films, nanoscience, biomaterials, plasma science, and vacuum technology. Thin Solid Films 660:120–160. https://doi.org/10.1016/j.tsf.2018.05.046CrossRef

53.

Tao F, Liu Y, Ren XY, Wang J, Zhou YZ, Miao YJ, Ren FZ, Wei SZ, Ma JM (2022) Different surface modification methods and coating materials of zinc metal anode. J Energy Chem 66:397–412. https://doi.org/10.1016/j.jechem.2021.08.022CrossRef

54.

Yan HZ, Zhu PF, Chen Z, Zhang H, Zhang Y, Zhang Y (2022) Effect of shot peening on the surface properties and wear behavior of heavy-duty-axle gear steels. J Market Res 17:22–32. https://doi.org/10.1016/j.jmrt.2021.12.126CrossRef

55.

Zhao XY, Wang BB, Lai WJ, Zhang GL, Zeng R, Li W, Wang XJ (2021) Improved tribological properties, cyto-biocompatibility and anti-inflammatory ability of additive manufactured Ti-6Al-4V alloy through surface texturing and nitriding. Surf Coat Technol 425:127686. https://doi.org/10.1016/j.surfcoat.2021.127686CrossRef

56.

Lam M, Migonney V, Falentin-Daudre C (2021) Review of silicone surface modification techniques and coatings for antibacterial/antimicrobial applications to improve breast implant surfaces. Acta Biomater 121:68–88. https://doi.org/10.1016/j.actbio.2020.11.020CrossRef

57.

Lu Y, Deng JX, Wang R, Wu JX, Meng Y (2022) Tribological performance of micro textured surface machined by Nd:YAG laser with different incident angle. Opt Laser Technol 148:107768. https://doi.org/10.1016/j.optlastec.2021.107768CrossRef

58.

Sreejith KP, Sharma AK, Basu PK, Kottantharayil A (2021) A comprehensive investigation of the potential of metal assisted chemical etched (MACE) nano-textures over conventional micron-sized iso-textures for industrial silicon solar cell applications. Sol Energy 230:874–882. https://doi.org/10.1016/j.solener.2021.10.035CrossRef

59.

Hayasaka T, Sun P, Jung H, Mizutani Y, Shamoto E (2021) Proposal of ‘ImpEC (impact excitation cutting)’ for realization of high-flexibility and high-efficiency micro/nano surface texturing. CIRP Ann 70:41–44. https://doi.org/10.1016/j.cirp.2021.04.023CrossRef

60.

Evans CJ, Bryan JB (2021) “Structured”, “textured” or “engineered” surfaces. Ann CIRP 48:541–566. https://doi.org/10.1016/S0007-8506(07)63233-8

61.

Yang WX, Wang XL, Li HQ, Wu J, Hua YQ, Li ZH, Liu H (2019) Fundamental research on the effective contact area of micro-/nano-textured surface in triboelectric nanogenerator. Nano Energy 57:41–47. https://doi.org/10.1016/j.nanoen.2018.12.029CrossRef

62.

Hamilton DB, Walowit JA, Allen CM (1966) A theory of lubrication by micro-irregularities. J Basic Eng. https://doi.org/10.1115/1.3645799CrossRef

63.

Etsion I, Halperina G (2002) laser surface textured hydrostatic mechanical seal. Tribol Trans 45:430–434. https://doi.org/10.1080/10402000208982570CrossRef

64.

Zanet AD, Casalegno V, Salvo M (2020) Laser surface texturing of ceramics and ceramic composite materials – a review. Ceram Int 47:7307–7320. https://doi.org/10.1016/j.ceramint.2020.11.146CrossRef

65.

Wu Z, Bao H, Xing YQ, Liu L (2021) Tribological characteristics and advanced processing methods of textured surfaces: a review Int J Adv Manuf Technol 114:1241–1277. https://doi.org/10.1007/s00170-021-06954-2

66.

Koshy P, Tovey J (2011) Performance of electrical discharge textured cutting tools. CIRP Ann Manuf Technol 60:153–156. https://doi.org/10.1016/j.cirp.2011.03.104CrossRef

67.

Walbrühl M, Linder D, Ågren J, Borgenstam A (2018) Alternative Ni-based cemented carbide binder -hardness characterization by nano-indentation and focused ion beam. Int J Refract Met Hard Mater 73:204–209. https://doi.org/10.1016/j.ijrmhm.2018.02.017CrossRef

68.

Jain A, Kumari N, Jagadevan S, Bajpai V (2020) Surface properties and bacterial behavior of micro conical dimple textured Ti6Al4V surface through micro-milling. Surf Interfaces 21:100714. https://doi.org/10.1016/j.jmapro.2020.02.009CrossRef

69.

Cao L, Wan Y, Gao JG (2016) Tribological performance of MoS2 film on chemically textured surface of 45# steel. Surf Technol 45:83–88. https://doi.org/10.16490/j.cnki.issn.1001-3660.2016.10.013

70.

Kumar V, Verma R, Kango S, Sharma VS (2020) Recent progresses and applications in laser-based surface texturing systems. Mater Today Commun 26:101736. https://doi.org/10.1016/j.mtcomm.2020.101736CrossRef

71.

Shirsath GB, Muralidhar K, Pala RGS, Ramkumar J (2019) Condensation of water vapor underneath an inclined hydrophobic textured surface machined by laser and electric discharge. Appl Surf Sci 484:999–1009. https://doi.org/10.1016/j.apsusc.2019.04.076CrossRef

72.

Boidi G, Tertuliano IS, Profito FG, Rossi WD, Machado IF (2020) Effect of laser surface texturing on friction behaviour in elastohydrodynamically lubricated point contacts under different sliding-rolling conditions. Tribol Int 149:105613. https://doi.org/10.1016/j.triboint.2019.02.021CrossRef

73.

Meng FM, Yu HY, Gui C, Chen L (2020) Experimental study of compound texture effect on acoustic performance for lubricated textured surfaces. Tribol Int 133:47–54. https://doi.org/10.1016/j.triboint.2018.12.036CrossRef

74.

Vlădescu S, Olver AV, Pegg IG, Reddyhoff T (2016) Combined friction and wear reduction in a reciprocating contact through laser surface texturing. Wear 358–359:51–61. https://doi.org/10.1016/j.wear.2016.03.035CrossRef

75.

Vlădescu S, Fowell M, Mattsson L, Reddyhoff T (2019) The effects of laser surface texture applied to internal combustion engine journal bearing shells – an experimental study. Tribol Int 134:317–327. https://doi.org/10.1016/j.triboint.2019.02.009CrossRef

76.

Grabon W, Pawlus P, Wos S, Koszela W, Wieczorowski M (2017) Effects of honed cylinder liner surface texture on tribological properties of piston ring-liner assembly in short time tests. Tribol Int 113:137–148. https://doi.org/10.1016/j.triboint.2016.11.025CrossRef

77.

NikitinSE SVV, Pozdnyakov AO, Stepanov SI, Timashov RB, Nikolaev VI, Terukov EA, Bobyl AV (2022) Fracture strength of silicon solar wafers with different surface textures. Mater Sci Semicond Process 140:106386. https://doi.org/10.1016/j.mssp.2021.106386CrossRef

78.

Siju AS, Waigaonkar SD (2021) Effects of rake surface texture geometries on the performance of single-point cutting tools in hard turning of titanium alloy. J Manuf Process 69:235–252. https://doi.org/10.1016/j.jmapro.2021.07.041CrossRef

79.

Guo QG, Zheng L, Zhong YH, Wang SK, Ren LQ (2022) Numerical simulation of hydrodynamic lubrication performance for continuous groove-textured surface. Tribol Int 167:107411. https://doi.org/10.1016/j.triboint.2021.107411CrossRef

80.

Zhang H, Zhang D, Hua M, Dong GN, Chin KS (2014) A study on the tribological behavior of surface texturing on babbitt alloy under mixed or starved lubrication. Tribol Lett 56:305–315. https://doi.org/10.1007/s11249-014-0410-4CrossRef

81.

Niu YX, Pang XJ, Yue SY, Shangguan B, Zhang YZ (2021) The friction and wear behavior of laser textured surfaces in non-conformal contact under starved lubrication. Wear 476:203723. https://doi.org/10.1016/j.wear.2021.203723CrossRef

82.

Liu WL, Ni HJ, Chen HL, Wang P (2019) Numerical simulation and experimental investigation on tribological performance of micro-dimples textured surface under hydrodynamic lubrication. Int J Mech Sci 163:105095. https://doi.org/10.1016/j.ijmecsci.2019.105095CrossRef

83.

Yagi K, Matsunaka W, Sugimura J (2021) Impact of textured surfaces in starved hydrodynamic lubrication. Tribol Int 154:106756. https://doi.org/10.1016/j.triboint.2020.106756CrossRef

84.

Ji M, Zhang H, Xu JY, Li C, Yu DD, Chen M, Mansori ME (2021) Toward the mechanisms of surface texturing on the wear behavior of dental zirconia ceramics under dry and saliva lubricated conditions. Wear 484–485:203845. https://doi.org/10.1016/j.wear.2021.203845CrossRef

85.

Wos S, Koszela W, Pawlus P (2020) The effect of graphite surface texturing on the friction reduction in dry contact. Tribol Int 151:106535. https://doi.org/10.1016/j.triboint.2020.106535CrossRef

86.

Wang B, Liu ZQ, CaiYK LXC, Ma HF, Song QH, Xiong ZH (2021) Advancements in material removal mechanism and surface integrity of high speed metal cutting: a review. Int J Mach Tools Manuf 166:103744. https://doi.org/10.1016/j.ijmachtools.2021.103744CrossRef

87.

Lian YS, Long YY, Zhao GL, Mu CL, Lie XM, Deng JX, Xie CP (2020) Performance of CrCN-WS2 hard/soft composite coated tools in dry cutting of titanium alloys. J Manuf Process 54:201–209. https://doi.org/10.1016/j.jmapro.2020.03.014CrossRef

88.

Said Z, Gupta M, Hegab H, Arora N, Khan AM, Jamil M, Bellos E (2020) A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids. Int J Adv Manuf Tech 105:2057–2086. https://doi.org/10.1007/s00170-019-04382-xCrossRef

89.

Sugihara T, Singh P, Enomoto T (2020) Development of novel cutting tools with dimple textured surfaces for dry machining of aluminum alloys. Procedia Manufacturing 14:111–117. https://doi.org/10.1016/j.promfg.2017.11.013CrossRef

90.

Meng Y, Deng JX, Zhang Y, Wang SJ, Li XM, Yue HZ, Ge DL (2020) Tribological properties of textured surfaces fabricated on AISI 1045 steels by ultrasonic surface rolling under dry reciprocating sliding. Wear 460–461:203488. https://doi.org/10.1016/j.wear.2020.203488CrossRef

91.

Yue HZ, Deng JX, Ge DL, Li XM, Zhang Y (2019) Effect of surface texturing on tribological performance of sliding guideway under boundary lubrication. J Manuf Process 47:172–182. https://doi.org/10.1016/j.jmapro.2019.09.031

92.

Ito S, Takahashi K, Sasaki S (2020) Generation mechanism of friction anisotropy by surface texturing under boundary lubrication. Tribol Int 149:105598. https://doi.org/10.1016/j.triboint.2019.02.006CrossRef

93.

Yue HZ, Deng JX, Zhang Y, Meng Y, Zou XQ (2020) Characterization of the textured surfaces under boundary lubrication. Tribol Int 151:106359. https://doi.org/10.1016/j.triboint.2020.106359CrossRef

94.

Shen ZJ, Wang FC, Chen ZG, Ruan XP, Zeng HH, Wang JH, An YR, Fan XL (2021) Numerical simulation of lubrication performance on chevron textured surface under hydrodynamic lubrication. Tribol Int 154:106704. https://doi.org/10.1016/j.triboint.2020.106704CrossRef

95.

Zhang DY, Zhao FF, Wei X, Gao F, Li PY, Dong GN (2019) Effect of texture parameters on the tribological properties of spheroidal graphite cast iron groove-textured surface under sand-containing oil lubrication conditions. Wear 428–429:470–480. https://doi.org/10.1016/j.wear.2019.04.015CrossRef

96.

Li D, Yang XF, Lu CY, Cheng J, Wang SR, Wang YJ (2020) Tribological characteristics of a cemented carbide friction surface with chevron pattern micro-texture based on different texture density. Tribol Int 142:106016. https://doi.org/10.1016/j.triboint.2019.106016CrossRef

97.

Yuan S, Lin NM, Wang WH, Zhang HX, Liu ZQ, Yu Y, Zeng QF, Wu YC (2020) Correlation between surface textural parameter and tribological behaviour of four metal materials with laser surface texturing (LST). Appl Surf Sci 583:152410. https://doi.org/10.1016/j.apsusc.2021.152410CrossRef

98.

Hu YH, Chen XN, Chen J, Zhang CQ, Fu WH (2021) The influence of crescent texture parameters on the axial force when drilling bone. Med Eng Phys 87:87–94. https://doi.org/10.1016/j.medengphy.2020.12.001CrossRef

99.

Nazari MH, Zhang Y, Mahmoodi A, Xu G, Yu J, Wu JL, Shi XM (2022) Nanocomposite organic coatings for corrosion protection of metals: a review of recent advances. Prog Org Coat 162:106573. https://doi.org/10.1016/j.porgcoat.2021.106573CrossRef

100.

Li YQ, Cai XF, Zhang GQ, Xu CJ, Guo WR, An MZ (2022) Optimization of electrodeposition nanocrytalline Ni-Fe alloy coatings for the replacement of Ni coatings. J Alloy Compd 903:163761. https://doi.org/10.1016/j.jallcom.2022.163761CrossRef

101.

Bogdan M, Błachnio J, Spychała J, Zasada D (2019) Assessment of usability of the exploited gas turbine blade heat-resistant coatings. Eng Fail Anal 105:337–346. https://doi.org/10.1016/j.engfailanal.2019.07.016CrossRef

102.

Yin B, Peng ZJ, Liang J, Jin KJ, Zhu SY, Yang J, Qiao ZH (2016) Tribological behavior and mechanism of self-lubricating wear-resistant composite coatings fabricated by one-step plasma electrolytic oxidation. Tribol Int 97:97–107. https://doi.org/10.1016/j.triboint.2016.01.020CrossRef

103.

Li RF, Yuan WY, Yue HY, Zhu YY (2022) Study on microstructure and properties of Fe-based amorphous composite coating by high-speed laser cladding. Opt Laser Technol 146:107574. https://doi.org/10.1016/j.optlastec.2021.107574CrossRef

104.

Mozgovoy S, Alik L, Hardell J, Prakash B (2019) Material transfer during high temperature sliding of Al-Si coated 22MnB5 steel against PVD coatings with and without aluminium. Wear 426–427:401–411. https://doi.org/10.1016/j.wear.2018.12.042CrossRef

105.

Azhari IE, García J, Soldera F, Suarez S, Jiménez-Piqué E, Mücklich F, Llanes L (2020) Contact damage investigation of CVD carbonitride hard coatings deposited on cemented carbides. Int J Refract Metal Hard Mater 86:105050. https://doi.org/10.1016/j.ijrmhm.2019.105050CrossRef

106.

Liu SY, Peng YB, Zhang L, Wang YM, Fan WJ, Wang AD, Zhang W, Tan YN, Ma QY, Lan Y (2022) Effect of nanostructure on wear and corrosion behavior of HVAF-Sprayed eutectic high-entropy alloy coatings. J Therm Spray Tech. https://doi.org/10.1007/s11666-022-01342-yCrossRef

107.

Larhlimi H, Ghailane A, Makha M, Alami J (2022) Magnetron sputtered titanium carbide-based coatings: a review of science and technology. Vacuum 197:110853. https://doi.org/10.1016/j.vacuum.2021.110853CrossRef

108.

Zhu LD, Xue PS, Lan Q, Meng GR, Ren Y, Yang ZC, Xu PH, Liu Z (2021) Recent research and development status of laser cladding: a review. Opt Laser Technol 138:106915. https://doi.org/10.1016/j.optlastec.2021.106915CrossRef

109.

Savraia RA, Morozova AN (2021) A review of studies in the field of production of coatings on metals by means of mechanical alloying. Surf Interface 27:101451. https://doi.org/10.1016/j.surfin.2021.101451CrossRef

110.

Zhao XM, Song JP, Yu Y, Zhuang ZG, Sun BZ, Qi Y (2016) Surface topography of CVD-W coatings on graphite substrate with a PVD-Si intermediate layer after thermal fatigue testing. Int J Refract Met Hard Mater 57:134–138. https://doi.org/10.1016/j.ijrmhm.2016.03.003CrossRef

111.

Liu XM, Liang ZT, Wang HB, Zhao Z, Liu C, Lu H, Volume SXY (2022) Wear resistance of ultra-coarse WC-WCoB-Co cemented carbide at different oxidation stages. Int J Refract Met Hard Mater 105:105827. https://doi.org/10.1016/j.ijrmhm.2022.105827CrossRef

112.

Kong DJ, Zhang DH, Guo HY (2017) Microstructures and friction–wear performances of cathodic arc ion plated TiAlN coatings on YT14 cemented carbide cutting tools. J Mater Res 32:1693–1700. https://doi.org/10.1557/jmr.2017.86CrossRef

113.

Zha XM, Wang TX, Chen FB, Jue W, Lin LL, Lin FT, Xie H, Jiang F (2022) Investigation the fatigue impact behavior and wear mechanisms of bilayer micro-structured and multilayer nano-structured coatings on cemented carbide tools in milling titanium alloy. Int J Refract Met Hard Mater 103:105738. https://doi.org/10.1016/j.ijrmhm.2021.105738CrossRef

114.

Çalışkan H, Kurbanoğlu C, Panjan P, Čekada M, Kramar D (2013) Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling. Tribol Int 62:215–222. https://doi.org/10.1016/j.triboint.2013.02.035CrossRef

115.

Li XF, Zhao YX, Guo ZA, Liu Y, Wang H, Zhang JF, Yi DH, Cao YK, Yang XH, Liu B, Liu Y, Bai PK (2022) Influence of different substrates on the microstructure and mechanical properties of WC-12Co cemented carbide fabricated via laser melting deposition. Int J Refract Met Hard Mater 104:105787. https://doi.org/10.1016/j.ijrmhm.2022.105787CrossRef

116.

Zhang L, Hu CQ, Yang YF, Misra RDK, Kondoh K, Lu YN (2022) Laser powder bed fusion of cemented carbides by developing a new type of Co coated WC composite powder. Addit Manuf 55:102820. https://doi.org/10.1016/j.addma.2022.102820CrossRef

117.

Guo ZH, Deng FM, Zhang L, Hao C, Zhao X, Xiang DH (2021) Fabrication and tribological properties of textured diamond coatings on WC-Co cemented carbide surfaces. Ceram Int 47:5423–5431. https://doi.org/10.1016/j.ceramint.2020.10.124CrossRef

118.

Peng B, Xu YX, Jian WD, Chen L, Kim KH, Wang QM (2022) Influence of preliminary metal-ion etching on the topography and mechanical behavior of TiAlN coatings on cemented carbides. Surf Coat Technol 432:128040. https://doi.org/10.1016/j.surfcoat.2021.128040CrossRef

119.

Govande AR, Chandak A, Sunil BR, Dumpala R (2022) Carbide-based thermal spray coatings: a review on performance characteristics and post-treatment. Int J Refract Met Hard Mater 103:105772CrossRef

120.

Siddiqui AA, Dubey AK (2016) Recent trends in laser cladding and surface alloying. Opt Laser Technol 134:106619. https://doi.org/10.1016/j.optlastec.2020.106619CrossRef

121.

Dezfuli SM, Sabzi M (2018) A study on the effect of presence of CeO₂ and benzotriazole on activation of self-healing mechanism in ZrO₂ ceramic-based coating. Int J Appl Ceram Technol. https://doi.org/10.1111/ijac.12901CrossRef

122.

Sun XL, Zhang JK, Pan WG, Wang WH, Tang CW (2022) Research progress in surface strengthening technology of carbide-based coating. J Alloy Compd 905:164062. https://doi.org/10.1016/j.jallcom.2022.164062CrossRef

123.

Aisenberg S, Chabot R (1971) Ion-beam deposition of thin films of diamond like carbon. J Appl Phys 42:2953–2958. https://doi.org/10.1063/1.1660654CrossRef

124.

Huang L, Yuan JT, Li C, Hong DB (2018) Microstructure, tribological and cutting performance of Ti-DLC/α-C: H multilayer film on cemented carbide. Surf Coat Technol 353:163–170. https://doi.org/10.1016/j.surfcoat.2018.08.076CrossRef

125.

Zia AW, Birkett M (2022) Deposition of diamond-like carbon coatings: Conventional to non-conventional approaches for emerging markets. Ceram Int 47:28075–28085. https://doi.org/10.1016/j.ceramint.2021.07.005CrossRef

126.

Bewilogua K, Hofmann D (2014) History of diamond-like carbon films – From first experiments to worldwide applications. Surf Coat Technol 242:214–225. https://doi.org/10.1016/j.surfcoat.2014.01.031CrossRef

127.

Huang L, Yuan JT, Li C, Hong DB (2018) Investigation of Cr(N)/DLC multilayer coatings elaborated by PVD for high wear resistance and low friction applications. Surf Coat Technol 353:163–170. https://doi.org/10.1016/j.surfcoat.2018.01.052CrossRef

128.

Yan MM, Wang XY, Zhang SW, Zhang ST, Sui XD, Li WS, Hao JY, Liu WM (2020) Friction and wear properties of GLC and DLC coatings under ionic liquid lubrication. Tribol Int 143:106067. https://doi.org/10.1016/j.triboint.2019.106067CrossRef

129.

Yetim AF, Kovacı H, Kasapoğlu AE, Bozkurt YB, Çelik A (2021) Influences of Ti, Al and V metal doping on the structural, mechanical and tribological properties of DLC films. Diam Relat Mater 120:108639. https://doi.org/10.1016/j.diamond.2021.108639CrossRef

130.

Bian XC, Chen Q, Zhang YF, Sang LJ, Tang WJ (2008) Deposition of nano-diamond-like carbon films by an atmospheric pressure plasma gun and diagnostic by optical emission spectrum on the process. Surf Coat Technol 202:5383–5385. https://doi.org/10.1016/j.surfcoat.2008.06.143CrossRef

131.

Nilkar M, Ghodsi FE, Jafari S, Thiry D, Snyders R (2021) Effects of nitrogen incorporation on N-doped DLC thin film electrodes fabricated by dielectric barrier discharge plasma: structural evolution and electrochemical performances. J Alloy Compd 853:157298. https://doi.org/10.1016/j.jallcom.2020.157298CrossRef

132.

Liang Y, Kumaran S, Zharnikov M, Tai Y (2021) Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors. Appl Surf Sci 569:151029. https://doi.org/10.1038/nature03090CrossRef

133.

Fourmont P, Gerlein L, Fortier F, Cloutier SG, Nechache R (2018) Highly-Efficient thermoelectric microgenerators using nearly room temperature pulsed laser deposition. ACS Appl Mater Interfaces. https://doi.org/10.1021/acsami.7b18852CrossRef

134.

Li W, Liu P, Liaw PK (2018) Microstructures and properties of high-entropy alloy films and coatings: a review. Math Res Lett 6:199–229. https://doi.org/10.1080/21663831.2018.1434248CrossRef

135.

Liu FY, Zeng Q, Li JJ, Hao XJ, Ho-Baillie A, Tang J, Green MA (2021) Emerging inorganic compound thin film photovoltaic materials: Progress, challenges and strategies. Mater Today 41:120–142. https://doi.org/10.1016/j.mattod.2020.09.002CrossRef

136.

Salian A, Mandal S (2021) Review on the deposition, structure and properties of high entropy oxide films: current and future perspectives. Bull Mater Sci 45:49. https://doi.org/10.1007/s12034-021-02617-wCrossRef

137.

Sato K, Yoshida K, Takahashi S, Anzai J (2011) pH- and sugar-sensitive layer-by-layer films and microcapsules for drug delivery. Adv Drug Deliv Rev 63:809–821. https://doi.org/10.1016/j.addr.2011.03.015CrossRef

138.

Cai ZB, Wang Z, Hong Y, Lu BW, Liu J, Li Y, Pu JB (2021) Improved tribological behavior of plasma-nitrided AlCrTiV and AlCrTiVSi high-entropy alloy films. Tribol Int 163:107195. https://doi.org/10.1016/j.triboint.2021.107195CrossRef

139.

Li YT, Wang CT, Ma DL, Zeng XK, Liu M, Jiang X, Leng YX (2021) Nano dual-phase CuNiTiNbCr high entropy alloy films produced by high-power pulsed magnetron sputtering. Surf Coat Technol 420:127325. https://doi.org/10.1016/j.surfcoat.2021.127325CrossRef

140.

Cai ZB, Wang Z, Yang WJ, Zhang P, Lu Y, Pu JB (2021) Microstructure and corrosion behavior of AlCrTiV-X (X = Cu, Mo, CuMo) high-entropy alloy films in 3.5 wt.% NaCl solution. Surf Interface 27:101558. https://doi.org/10.1016/j.surfin.2021.101558

141.

Ren P, Si YX, Wang GG, Yang XY, Du SX, Li Y, Qiu JX, Zhan SZ (2021) Novel production techniques for solid solution Nb–Y–N films with improved tribological properties and hydrophobic behavior. Vacuum 194:110621. https://doi.org/10.1016/j.vacuum.2021.110621CrossRef

142.

Guan X, Yu YL, Hou ZN, Wu K, Zhao HR, Liu S, Fei Y, Zhang T (2021) A flexible humidity sensor based on self-supported polymer film. Sens Actuators, B Chem 358:131438. https://doi.org/10.1016/j.snb.2022.131438CrossRef

143.

Zhou Q, Luo DW, Ye WT, Li S, Huang ZB, Ma B, Wang HF (2021) Mechanical and tribological behaviors of metallic glass/graphene film with a laminated structure. Compos A Appl Sci Manuf 155:106851. https://doi.org/10.1016/j.compositesa.2022.106851CrossRef

144.

Wang XB, Huang JX, Guo ZG (2021) Overview of the development of slippery surfaces: lubricants from presence to absence. Adv Coll Interface Sci 301:102602. https://doi.org/10.1016/j.cis.2022.102602CrossRef

145.

Meng YG, Xu J, Jin ZM, Prakash B, Hu YZ (2021) A review of recent advances in tribology. Friction 8:221–300. https://doi.org/10.1007/s40544-020-0367-2CrossRef

146.

Somers AE, Howlett PC, MacFarlane DR, Forsyth M (2013) A review of ionic liquid lubricants. Lubricants 1:3–21. https://doi.org/10.3390/lubricants1010003CrossRef

147.

Zhao J, Sheng W, Li ZMQ, Zhang H, Zhu RP (2022) Effect of lubricant selection on the wear characteristics of spur gear under oil-air mixed lubrication. Tribol Int 167:107382. https://doi.org/10.1016/j.triboint.2021.107382CrossRef

148.

Roy S Jr, LS, Viola M, Luo HM, Leonard D, Qu J (2021) Oil miscible phosphonium-phosphate ionic liquid as novel antiwear and antipitting additive for low-viscosity rear axle lubricants. Wear 466–467:203588. https://doi.org/10.1016/j.wear.2020.203588CrossRef

149.

Scharf TW, Prasad SV (2013) Solid lubricants: a review. J Mater Sci 48:511–531. https://doi.org/10.1007/s10853-012-7038-2CrossRef

150.

Darshan C, Jain S, Dogra M, Gupta MK, Mia M, Haque R (2019) Correction to: Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool. Int J Adv Manuf Tech. https://doi.org/10.1007/s00170-019-04221-zCrossRef

151.

Marian M, Tremmel S, Wartzack S, Song GC, Wang B, Yu JH, Rosenkranzc A (2020) Mxene nanosheets as an emerging solid lubricant for machine elements – towards increased energy efficiency and service life. Appl Surf Sci 523:146503. https://doi.org/10.1016/j.apsusc.2020.146503CrossRef

152.

Chen LX, Liu ZQ, Shen Q (2018) Enhancing tribological performance by anodizing micro-textured surfaces with nano-MoS2 coatings prepared on aluminum-silicon alloys. Tribol Int 122:84–95. https://doi.org/10.1016/j.triboint.2018.02.039CrossRef

153.

Yan H, Chen ZF, Zhao J, Zhang PL, Yu ZS, Lu QH (2020) Enhancing tribological properties of WS₂/NbC/Co-based self-lubricating coating via laser texturing and laser cladding two-step process. J Market Res 9:9907–9919. https://doi.org/10.1016/j.jmrt.2020.07.001CrossRef

154.

Pettersson U, Jacobson S (2004) Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated sliding. Tribol Lett 3:553–559. https://doi.org/10.1023/B:TRIL.0000044504.76164.4eCrossRef

155.

Mishra P, Penchaliah R (2020) Synergistic effect of surface texturing and coating on the friction between piston ring and cylinder liner contact. P I Mech Eng J: J Eng. https://doi.org/10.1177/1350650120951289

156.

Shoja S, Mortazavi N, Lindahl E, Norgren E, Halvarsson BO, M, (2020) Microstructure investigation of textured CVD alumina coatings. Int J Refract Metal Hard Mater 87:105125. https://doi.org/10.1016/j.ijrmhm.2019.105125CrossRef

157.

Xing YQ, Deng JX, Gao P, Gao JT, Wu Z (2018) Angle-dependent tribological properties of AlCrN coatings with microtextures induced by nanosecond laser under dry friction. Appl Phys A 124:294. https://doi.org/10.1007/s00339-018-1710-6CrossRef

158.

Li XM, Deng JX, Zhang LL, Liu YY, Yue HZ, Duan R, Ge DL (2019) Effect of surface textures and electrohydrodynamically atomized WS₂ films on the friction and wear properties of ZrO₂ coatings. Ceram Int 45:1020–1030. https://doi.org/10.1016/j.ceramint.2018.09.281CrossRef

159.

Guo XH, Liu F, Zhang KD, Wang CY, Piao ZP, Sun LN (2020) Controllable preparation of micro-textures on WC/Co substrate surface by an integrated laser-dry etching process for improving PVD coatings adhesion. Appl Surf Sci 534:147580. https://doi.org/10.1016/j.apsusc.2020.147580CrossRef

160.

Ahmed YS, Veldhuis SC (2021) Enhancement of carbide tool performance during dry machining through a combination of laser surface texturing and tungsten disulfide soft coatings. Surf Coat Technol 428:127849. https://doi.org/10.1016/j.surfcoat.2021.127849CrossRef

161.

Shum PW, Zhou ZF, Li KY (2013) Investigation of the tribological properties of the different textured DLC coatings under reciprocating lubricated conditions. Tribol Int 65:259–264. https://doi.org/10.1016/j.triboint.2013.01.012CrossRef

162.

Matějíček J, Vilémová M, Moskal D, Mušálek R, Krofta J, Janata M, Kutílek Z, Klečka J, Heuer S, Martan J, Nardozza E, Houdková S, Dorow-Gerspach D (2019) The role of laser texturing in improving the adhesion of plasma sprayed tungsten coatings. J Therm Spray Technol 28:1346–1362. https://doi.org/10.1007/s11666-019-00924-7CrossRef

163.

Fan HZ, Su YF, Song JJ, Wan HQ, Hu LT, Zhang YS (2019) Design of “double layer” texture to obtain superhydrophobic and high wear-resistant PTFE coatings on the surface of Al₂O₃/Ni layered ceramics. Tribol Int 136:455–461. https://doi.org/10.1016/j.triboint.2019.04.004CrossRef

164.

Zhao WJ, Pu JB, Yu QY, Zeng ZX, Wu XD, Xue QJ (2019) A novel strategy to enhance micro/nano-tribological properties of DLC film by combining micro-pattern and thin ionic liquids film. Colloids Surf, A 428:70–78. https://doi.org/10.1016/j.colsurfa.2013.03.047CrossRef

165.

He DQ, He C, Li WS, Shang LL, Wang LP, Zhang GG (2020) Tribological behaviors of in-situ textured DLC films under dry and lubricated conditions. Appl Surf Sci 525:146581. https://doi.org/10.1016/j.apsusc.2020.146581CrossRef

166.

Tan P, Fu LC, Teng J, Zhu JJ, Yang WL, Li DY, Zhou LP (2019) Effect of texture on wear resistance of tantalum nitride film. Tribol Int 133:126–135. https://doi.org/10.1016/j.triboint.2019.01.001CrossRef

167.

Pimenov SM, Jaeggi B, Neuenschwander B, Zavedeev EV, Zilova OS, Shupegin ML (2019) Femtosecond laser surface texturing of diamond-like nanocomposite films to improve tribological properties in lubricated sliding. Diam Relat Mater 93:42–49. https://doi.org/10.1016/j.diamond.2019.01.022CrossRef

168.

Ding XX, Chen DL, Zhang WZ, Yu SR (2019) Experiment of frictional vibration performance of the micro-texture of DLC thin film with dry gas seal rings. Tribol Int 147:106267. https://doi.org/10.1016/j.triboint.2020.106267CrossRef

169.

Chen SC, Qian GC, Yang L (2019) Precise control of surface texture on carbon film by ion etching through filter: optimization of texture size for improving tribological behavior. Surf Coat Technol 362:105–112.https://doi.org/10.1016/j.surfcoat.2019.01.095

170.

He DQ, Zheng SX, Pu JB, Zhang GG, Hu LT (2015) Improving tribological properties of titanium alloys by combining laser surface texturing and diamond-like carbon film. Tribol Int 82:20–27. https://doi.org/10.1016/j.triboint.2014.09.017CrossRef

171.

Xiang DH, Zhang ZQ, Chen YB, Hu YW, Lei XF (2021) Study of tribological properties of textured boron-doped diamond film under water lubrication. Surf Interfaces 23:100983. https://doi.org/10.1016/j.surfin.2021.100983CrossRef

172.

Ramesh A, Akram W, Mishra SP, Cannon AH, Polycarpou AA, King WP (2013) Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication. Tribol Int 57:170–176. https://doi.org/10.1016/j.triboint.2012.07.020CrossRef

173.

Krahmer DM, Egea AJS, Celentano D, Martynenko V, Cruchag M (2020) Friction characterization when combining laser surface texturing and graphite-based lubricants. J Market Res 9:1759–1767. https://doi.org/10.1016/j.jmrt.2019.12.007CrossRef

174.

Guo ZW, Huang QR, Xie X, Yuan CQ (2021) Effects of spherical-platform texture parameters on the tribological performance of water-lubricated bearings. Wear 477:203863. https://doi.org/10.1016/j.wear.2021.203863CrossRef

175.

Zhang H, Hu M, Dong GN, Zhang DY, Chin KS (2016) A mixed lubrication model for studying tribological behaviors of surface texturing. Tribol Int 93:583–592. https://doi.org/10.1016/j.triboint.2015.03.027CrossRef

176.

Zhang J, Lu GC, Shi XL, Yang ZY, Xue YW, Zhou HY (2021) Improving tribological performance of Inconel 625 by combining groove-textured surfaces with Sn-Ag-Cu solid lubricant. J Mater Eng Perform 30:154–164. https://doi.org/10.1007/s11665-020-05363-yCrossRef

177.

Qiao CF, Yu J, Zhang S, Liu ZD, Wang JL (2022) Combined effect of a laser cladded coating and surface texture on tribological performance under dry sliding and starved lubrication. Met Mater Int 28:666–678. https://doi.org/10.1007/s12540-021-01138-9CrossRef

178.

Xu YF, Zheng Q, Abuflaha R, Olson D, Furlong O, You T, Zhang QQ, Hu XG, Tysoe WT (2019) Influence of dimple shape on tribofilm formation and tribological properties of textured surfaces under full and starved lubrication. Tribol Int 136:267–275. https://doi.org/10.1016/j.triboint.2019.03.047CrossRef

179.

Galda L, Sep J, Prucnal S (2016) The effect of dimples geometry in the sliding surface on the tribological properties under starved lubrication conditions. Tribol Int 99:77–84. https://doi.org/10.1016/j.triboint.2016.03.015CrossRef

180.

Chang T, Guo ZW, Yuan CQ (2019) Study on influence of Koch snowflake surface texture on tribological performance for marine water-lubricated bearings. Tribol Int 129:29–37. https://doi.org/10.1016/j.triboint.2018.08.015CrossRef

181.

Gheisari R, Polycarpou AA (2020) Effect of surface microtexturing on seawater-lubricated contacts under starved and fully-flooded conditions. Tribol Int 148:106339. https://doi.org/10.1016/j.triboint.2020.106339CrossRef

182.

Wang HX, Zhuang J, Qi HY, Yu JT, Guo ZJ, Ma YH (2020) Laser-chemical treated superhydrophobic surface as a barrier to marine atmospheric corrosion. Surf Coat Technol 401:126255. https://doi.org/10.1016/j.surfcoat.2020.126255CrossRef

183.

Huang QP, Shi XL, Xue YW, Zhang KP, Gao YY, Wu CH (2022) Synergetic effects of biomimetic microtexture with multi-solid lubricants to improve tribological properties of AISI 4140 steel. Tribol Int 167:107395. https://doi.org/10.1016/j.triboint.2021.107395CrossRef

184.

Shen Y, Ye B, Yu BH, Liu ZX, Huang RX, Xu JJ (2020) Enhancement of heavy-duty friction and wear characteristics of cast-iron surface by electrolytic micro-textures filled with MoS₂. Surf Coat Technol 408:126806. https://doi.org/10.1016/j.surfcoat.2020.126806CrossRef

185.

Song WL, Wang SJ, Lu Y, Xia ZX (2018) Tribological performance of microhole-textured carbide tool filled with CaF₂. Materials. https://doi.org/10.3390/ma11091643CrossRef

186.

Zhang LX, Lin NM, Zou JJ, Lin XZ, Liu ZQ, Yuan S, Yu Y, Wang ZX, Zeng QF, Chen WG, Tian LH, Qin L, Xie RZ, Li BQ, Wang ZH, Tang B, Wu YC (2018) Super-hydrophobicity and corrosion resistance of laser surface textured AISI 304 stainless steel decorated with Hexadecyltrimethoxysilane (HDTMS). Opt Laser Technol 127:106146. https://doi.org/10.1016/j.optlastec.2020.106146CrossRef

187.

Tao SQ, Yang JS, Shao F, Zhao HY, Zhong XH, Zhuang Y, Sheng J, Ni JX, Li QH, Tao SY (2022) Atmospheric plasma sprayed thick thermal barrier coatings: microstructure, thermal shock behaviors and failure mechanism. Eng Fail Anal 131:105819. https://doi.org/10.1016/j.engfailanal.2021.105819CrossRef

188.

Li DY, Zhang ZX, Cui XF, Feng LT, Zhang D, Jin G, Liu JN, Zheng W (2022) Effect of graphite/CeO₂ on microstructure and tribological property of plasma cladded Co-based coatings. Mater Chem Phys 280:125756. https://doi.org/10.1016/j.matchemphys.2022.125756CrossRef

189.

Aghajani H, Valefi Z, Zamani P (2022) Phase composition, microstructure, mechanical properties, and wear performance of nanostructured Al₂O₃ and Al₂O₃-Y₂O₃ coatings deposited by plasma spraying. Appl Surf Sci 585:152754. https://doi.org/10.1016/j.apsusc.2022.152754CrossRef

190.

Babaremu K, Jen TC, Oladijo P, Akinlabi E (2022) A systematic review of the effects of deposition parameters on the properties of Inconel thin films. Int J Adv Manuf Tech 119:4125–4145. https://doi.org/10.1007/s00170-021-08379-3CrossRef

191.

Zouari M, Kharrat M, Dammak M, Barletta M (2014) A comparative investigation of the tribological behavior and scratch response of polyester powder coatings filled with different solid lubricants. Prog Org Coat 77:1408–1417. https://doi.org/10.1016/j.porgcoat.2014.04.023CrossRef

192.

Kohl M, Kalendová A, Boidin R, Němec P (2014) The effect of amorphous chalcogenides on mechanical and anticorrosive properties of protective organic coatings containing high amounts of zinc metal particles. Prog Org Coat 77:1369–1375. https://doi.org/10.1016/j.porgcoat.2014.04.029CrossRef

193.

Aliofkhazraei M, Walsh FC, Zangari G, Köçkar H, Alper M, RizalC ML, Protsenko V, Arunachalam R, Rezvanian A, Moein A, Assareh S, Allahyarzadeh MH (2021) Development of electrodeposited multilayer coatings: a review of fabrication, microstructure, properties and applications. Appl Surf Sci Adv 6:100141. https://doi.org/10.1016/j.apsadv.2021.100141CrossRef

194.

Wei YQ, Zong XY, Jiang ZQ, Tian XB (2018) Characterization and mechanical properties of TiN/TiAlN multilayer coatings with different modulation periods. Int J Adv Manuf Tech 96:1677–1683. https://doi.org/10.1007/s00170-017-0832-xCrossRef

195.

Avilés MD, Jiménez AE, Saurín N, Carrión FJ, Sanes J, Bermúdez MD (2018) Tribological characterization of epoxy coatings modified with ionic liquids and graphene. Tribol Int 149:105516. https://doi.org/10.1016/j.triboint.2018.12.016CrossRef

196.

Bandeira P, Monteiro J, Baptista AM, Magalhães FD (2016) Influence of oxidized graphene nanoplatelets and [DMIM][NTf₂] ionic liquid on the tribological performance of an epoxy-PTFE coating. Tribol Int 97:478–489. https://doi.org/10.1016/j.triboint.2016.02.005CrossRef

197.

Yang LQ, Neville A, Brown A, Ransom P, Morina A (2015) Effect of lubricant additives on the WDLC coating structure when tested in boundary lubrication regime. Tribol Lett. https://doi.org/10.1007/s11249-015-0464-yCrossRef

198.

Gilewicz A, Warcholinski B (2014) Tribological properties of CrCN/CrN multilayer coatings. Tribol Int 80:34–40. https://doi.org/10.1016/j.triboint.2014.06.012CrossRef

199.

Sergevnin VS, Blinkov IV, Volkhonskii AO, Belov DS, Chernogor AV (2019) Wear and erosion of arc-PVD multilayer Ti-Al-Mo-N coatings under various conditions of friction and loading. Int J Adv Manuf Tech 98:593–601. https://doi.org/10.1007/s00170-018-2235-zCrossRef

200.

Li Z, Liu CH, Chen QS, Yang JJ, Liu JM, Yang HY, Zhang W, Zhang RQ, He LX, Long JP, Chang H (2021) Microstructure, high-temperature corrosion and steam oxidation properties of Cr/CrN multilayer coatings prepared by magnetron sputtering. Corros Sci 191:109755. https://doi.org/10.1016/j.corsci.2021.109755CrossRef

Title: Research progress of surface modification and solid–liquid lubrication synergistic friction reduction and wear resistance
Authors: Keyang Chen
Xuefeng Yang
Guojie Lv
Yifeng Zhang
Hui Yang
Yalong Gao
Publication date: 18-08-2022
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 3-4/2022
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-09953-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3-4/2022

A control method with considering error coupling in milling multi-feature thin-walled parts

Microstructure and corrosion behavior of friction-surfaced 304L austenitic stainless steels

Allocation of geometric tolerances in one-dimensional stackup problems

Performance and increased fatigue life for a Ti workpiece produced by the EDM process

Experimental and numerical study on the explosive welding of niobium-steel

Strategies for adjusting process parameters in CAE simulation to meet real injection molding condition of screw positions and cavity pressure curves

Premium Partners