Top

Physics of Metals and Metallography

Published in:

01-07-2021 | STRENGTH AND PLASTICITY

Structure and Properties of the Al–1% Ca–0.5% Fe–0.25% Si–0.5% Zr Alloy Produced via Casting in an Electromagnetic Crystallizer

Authors: N. O. Korotkova, S. O. Cherkasov, V. N. Timofeev, A. A. Aksenov

Published in: Physics of Metals and Metallography | Issue 7/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The structure, mechanical properties, and electrical resistivity of a cold-rolled wire made of the Al–1% Ca–0.5% Fe–0.25% Si–0.5% Zr alloy produced via casting in an electromagnetic crystallizer are analyzed. A heat-resistant wire made of the alloy Al–7% REM (01417), which was developed for the granular technology of powder metallurgy (RS/PM), is used as a reference. It is shown that the addition of calcium in the presence of iron and silicon makes it possible to obtain a phase composition that provides a thermal stability of up to 300°C inclusive.

previous article Evaluation of the Role of Vanadium and Molybdenum in Changing the Kinetics of Austenite Decomposition and the Mechanical Properties of the Simulated Overheating Zone of Low-Carbon Niobium Steels

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

S. M. Eger, A. M. Matveenko, and I. A. Shatalov, Basics of Aviation Engineering, 2nd ed., Ed. by I. A. Shatalov (MAI, Moscow, 1999) [in Russian].

A A. Avdulov, N. V. Sergeev, I. S. Gudkov, V. N. Timofeev, Yu. V. Gorokhov, and Yu. S. Avdulova, “Wire production development of special aluminum alloys based on electromagnetic mold casting method and continuous extrusion process known as conform,” J. Sib. Fed. Univ. Eng. Technol. 10, 85–94 (2017). https://doi.org/10.17516/1999-494X-2017-10-1-85-94CrossRef

Technical Handbook: Cables, Wires, Materials for Wire Industy, 3rd ed. (NKP “Ellips”, Moscow, 2006), p. 360 [in Russian].

B. K. Vul’f and K. P. Romadin, Aviation Materials Science, 3rd ed. (Mashinostroenie, Moscow, 1967) [in Russian].

Yu. V. Matveev, V. P. Gavrilova, and V. V. Baranov, “Lightweight conductive materials for aviaprods,” Kabeli i Provoda, No. 5, 22–23 (2006).

N. A. Belov, A. N. Alabin, and A. Y. Prokhorov, “The influence that a zirconium additive has on the strength and electrical resistance of cold-rolled aluminum sheets,” Russ. J. Non-Ferrous Met. 50, 357–362 (2009). https://doi.org/10.3103/S1067821209040099CrossRef

V. I. Dobatkin, V. I. Elagin, and V. M. Fedorov. Fast Crystallized Aluminum Alloys (VILS, Moscow, 1995), p. 341 [in Russian].

V. I. Dobatkin, V. I. Elagin, and V. M. Fedorov, “Granulated aluminum alloys with special physical properties,” Aviatsionnaya Promyshlennost’, No. 7, 55–57 (1990).

M. V. Pervukhin and V. N. Timofeev, Modern Electrotechnologies for Production of Aluminum Alloys (SFU, Krasnoyarsk, 2015) [in Russian].

10.

N. O. Korotkova, N. A. Belov, V. N. Timofeev, M. M. Motkov, and S. O. Cherkasov, “Influence of heat treatment on the structure and properties of an Al–7% REM conductive aluminum alloy casted in an electromagnetic crystallizer,” Phys. Met. Metallogr. 121, 182–188 (2020). https://doi.org/10.1134/S0031918X2002009XCrossRef

11.

N. O. Korotkova, N. A. Belov, N. N. Avksentieva, and A. A. Aksenov, “Effect of calcium additives on the phase composition and physicomechanical properties of a conductive alloy Al–0.5% Fe–0.2% Si–0.2% Zr–0.1% Sc,” Phys. Met. Metallogr. 121, 95–101 (2020). https://doi.org/10.1134/S0031918X20010093CrossRef

12.

N. A. Belov, T. K. Akopyan, N. O. Korotkova, E. A. Naumova, A. M. Pesin, and N. V. Letyagin, “Structure and properties of Al–Ca(Fe,Si,Zr,Sc) wire alloy manufactured from as-cast billet,” JOM 72, 3760–3768 (2020). https://doi.org/10.1007/s11837-020-04342-xCrossRef

13.

E. Çadırl, H. Tecer, M. Sahin, E. Yılmaz, T. Kırındı, and M. Gündüz, “Effect of heat treatments on the microhardness and tensile strength of Al–0.25 wt % Zr alloy,” J. Alloys Compd. 632, 229–237 (2015). https://doi.org/10.1016/j.jallcom.2015.01.193CrossRef

14.

T. S. Orlova, A. M. Mavlyutov, T. A. Latynina, E. V. Ubyivovk, M. Y. Murashkin, R. Schneider, D. Gerthsen, and R. Z. Valiev, “Influence of severe plastic deformation on microstructure strength and electrical conductivity of aged Al–0.4Zr(Wt. %) alloy,” Rev. Adv. Mater. Sci. 55, 92–101 (2018). https://doi.org/10.1515/rams-2018-0032CrossRef

15.

W. Yuan and Zh. Liang, “Effect of Zr addition on properties of Al–Mg–Si aluminum alloy used for all aluminum alloy conductor,” Mater. Des. 32, Nos. 8–9, 4195–4200 (2011). https://doi.org/10.1016/j.matdes.2011.04.034CrossRef

16.

K. E. Knipling, D. C. Dunand, and D. N. Seidman, “Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425°C,” Acta Mater. 56, 114–127 (2008). https://doi.org/10.1016/j.actamat.2007.09.004CrossRef

17.

N. A. Belov, A. N. Alabin, and A. R. Teleuova, “Comparative analysis of alloying additives as applied to the production of heat-resistant aluminum-base wires,” Met. Sci. Heat. Treat. 53, 455–459 (2012). https://doi.org/10.1007/s11041-012-9415-5CrossRef

18.

N. A. Belov, E. A. Naumova, T. K. Akopyan, and V. V. Doroshenko, “Phase diagram of the Al–Ca–Fe–Si system and its application for the design of aluminum matrix composites,” JOM 70, 2710–2715 (2018). https://doi.org/10.1007/s11837-018-2948-3CrossRef

19.

N. A. Belov, E. A. Naumova, and T. K. Akopyan, Eutectic Alloys Based on Aluminum: New Systems of Alloying (Ruda i Metally, Moscow, 2016) [in Russian].

20.

J. P. Brubak, B. Eftestol, and F. Ladiszlaldesz, U.S. Patent No. 5067994 (26 November 1991).

21.

S. Kenichi, Y. Kazuhisa, H. Yasumasa, K. Takasi, and Y. Minoru, U.S. Patent No. 4402763 (03 September 1983).

22.

M. Jabłoński, T. A. Knych, and B. Smyrak, “New aluminium alloys for electrical wires of fine diameter for automotive industry,” Arch. Metall. Mater. 54, No. 3, 671–676 (2009).

23.

V. V. Teleshov, “Fundamental regularity of structure change during crystallization of aluminum alloys with different cooling rates,” Tekhnologiya Legkikh Splavov, No. 2, 13–18 (2015).

24.

N. A. Belov, E. A. Naumova, V. D. Ilyukhin, and V. V. Doroshenko, “Structure and mechanical properties of Al–6% Ca–1% Fe alloy foundry goods, obtained by die casting,” Tsvet. Met. 3, 55–61 (2017). https://doi.org/10.17580/tsm.2017.03.11CrossRef

25.

W. Lefebvre, F. Danoix, H. Hallem, B. Forbord, A. Bostel, and K. Marthinsen, “Precipitation kinetic of Al₃(Sc,Zr) dispersoids in aluminium,” J. Alloys Compd. 470, 107–110 (2009). https://doi.org/10.1016/j.jallcom.2008.02.043CrossRef

26.

E. Clouet, A. Barbu, L. Lae, and G. Martin, “Precipitation kinetics of Al₃Zr and Al₃Sc in aluminum alloys modeled with cluster dynamics,” Acta Mater. 53, 2313–2325 (2005). https://doi.org/10.1016/j.actamat.2005.01.038CrossRef

Title: Structure and Properties of the Al–1% Ca–0.5% Fe–0.25% Si–0.5% Zr Alloy Produced via Casting in an Electromagnetic Crystallizer
Authors: N. O. Korotkova
S. O. Cherkasov
V. N. Timofeev
A. A. Aksenov
Publication date: 01-07-2021
Publisher: Pleiades Publishing
Published in: Physics of Metals and Metallography / Issue 7/2021
Print ISSN: 0031-918X
Electronic ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X21060065

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Other articles of this Issue 7/2021

Rolling Textures in BCC Metals: A Biaxial Stress Texture Theory and Experiments

Evaluation of the Role of Vanadium and Molybdenum in Changing the Kinetics of Austenite Decomposition and the Mechanical Properties of the Simulated Overheating Zone of Low-Carbon Niobium Steels

Effect of a Carbon Polymorph (Fullerite, Graphite) on the Phase Composition of Mechanocomposites with Iron

Electric Polarization in a Nanosized, Two-Layer, Ferromagnetic Film with Combined Uniaxial and Cubic Anisotropy in the Layers

Simulation of the Dynamics of Changing the Heat Resistance of Nickel Alloys by Machine Learning Methods

Energy and Structure of Two-Dimensional Domain Walls in an External Magnetic Field Perpendicular to the Easy Magnetization Axis