Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Progress in Additive Manufacturing
Published in: Progress in Additive Manufacturing 6/2022

18-04-2022 | Full Research Article

Studies on the effect of part geometry and process parameter on the dimensional deviation of additive manufactured part using ABS material

Authors: M. Jayashuriya, S. Gautam, A. Nithish Aravinth, G. Vasanth, Ramu Murugan

Published in: Progress in Additive Manufacturing | Issue 6/2022

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The focus of this research work is to investigate the dimensional deviations obtained in the Fused Deposition Modelling process using ABS material and to perform optimization studies of 3D printing parameters. Preliminary investigations were carried out to identify the influence of size using different geometrical shapes and observed that small sized features have higher dimensional deviation. Inorder to further proceed with the optimization study, artifact with small sized geometrical features was used. Optimization studies were performed using Grey Taguchi Analysis and Taguchi Methodology considering infill percentage, layer thickness, number of shells, and speed of printing as process parameters. This study reveals that the percentage of infill material and the number of shells have a significant impact on the dimensional deviation of 33.89% and 32.43%, respectively, on 3D printed ABS samples.
previous article Investigation on elastic properties and unconventional plasticity of 316L stainless steel processed by selective laser melting technology
next article Relationship between microstructure, mechanical and magnetic properties of pure iron produced by laser powder bed fusion (L-PBF) in the as-built and stress relieved conditions

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Mohamed OA, Masood SH, Bhowmik JL (2015) Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Adv Manuf 3(1):42–53CrossRef
2.
Shahrubudin N, Lee TC, Ramlan R (2019) An overview on 3D printing technology: technological, materials, and applications. Proc Manuf 35:1286–1296
3.
Ramu M, Ananthasubramanian M, Kumaresan T et al (2018) Optimization of the configuration of porous bone scaffolds made of polyamide/hydroxyapatite composites using selective laser sintering for tissue engineering applications. Bio Med Mater Eng 29(6):739–755CrossRef
4.
5.
Sheoran AJ, Kumar H (2020) Fused deposition modeling process parameters optimization and effect on mechanical properties and part quality: review and reflection on present research. Mater Today Proc 21:1659–1672CrossRef
6.
Agarwal R, Gupta V, Singh J (2022) Additive manufacturing-based design approaches and challenges for orthopaedic bone screws: a state-of-the-art review. J Braz Soc Mech Sci Eng 44:37CrossRef
7.
Agarwal R (2022) The personal protective equipment fabricated via 3D printing technology during COVID-19. Ann 3D Print Med 5:100042CrossRef
8.
Agarwal R, Jain V, Gupta V et al (2020) Effect of surface topography on pull-out strength of cortical screw after ultrasonic bone drilling: an in vitro study. J Braz Soc Mech Sci Eng 42:363CrossRef
9.
Agarwal R, Gupta V, Jain V (2021) A novel technique of harvesting cortical bone grafts during orthopaedic surgeries. J Braz Soc Mech Sci Eng 43:337CrossRef
10.
Vijayan VJ, Arun A, Bhowmik S et al (2016) Development of lightweight high-performance polymeric composites with functionalized nanotubes. J Appl Polymer Sci 133(21):43471CrossRef
11.
Kumar GV, Pramod R (2017) Investigation of mechanical properties of aluminium reinforced glass fibre polymer composites. AIP Conf Proc 1859(1):020084MathSciNetCrossRef
12.
Stansbury JW, Idacavage MJ (2016) 3D printing with polymers: challenges among expanding options and opportunities. Dent Mater 32(1):54–64CrossRef
13.
Sudin MN, Shamsudin SA, Abdullah MA (2016) Effect of part features on dimensional accuracy of FDM model. APRN J Eng Appl Sci 11(13):8067–8072
14.
Kacmarcik J, Spahic D, Varda K (2018) An investigation of geometrical accuracy of desktop 3D printers using CMM. IOP Conf Ser Mater Sci Eng 393(1):012085CrossRef
15.
Minetola P, Galati M, Calignano F et al (2020) Comparison of dimensional tolerance grades for metal AM processes. Proc CIRP 88:399–404CrossRef
16.
Minetola P, Iuliano L, Marchiandi G (2016) Benchmarking of FDM machines through part quality using IT grades. Proc CIRP 41:1027–1032CrossRef
17.
Minetola P, Calignano F, Galati M (2020) Comparing geometric tolerance capabilities of additive manufacturing systems for polymers. Addit Manuf 32:101103
18.
Moylan S, Slotwinski J, Cooke A et al (2012) Proposal for a standardized test artifact for additive manufacturing machines and processes. In: Proceedings of the 2012 annual international solid freeform fabrication symposium, pp 6–8
19.
Mahesh M, Wong YS, Fuh JYH et al (2004) Benchmarking for comparative evaluation of RP systems and processes. Rapid Prototyp J 10(2):123–135CrossRef
20.
Mora SM, Gil JC, López AMC (2019) Influence of manufacturing parameters in the dimensional characteristics of ABS parts obtained by FDM using reverse engineering techniques. Proc Manuf 41:968–975
21.
Shahrain M, Didier T, Lim GK et al (2016) Fast deviation simulation for ‘fused deposition modeling process.’ Proc CIRP 43:327–332CrossRef
22.
Cruz Sanchez FA, Boudaoud H, Muller L et al (2014) Towards a standard experimental protocol for open source additive manufacturing: this paper proposes a benchmarking model for evaluating accuracy performance of 3D printers. Virtual Phys Prototyp 9(3):151–167CrossRef
23.
Decker N, Yee A (2015) A simplified benchmarking model for the assessment of dimensional accuracy in FDM processes. Int J Rapid Manuf 5(2):145–154CrossRef
24.
Lieneke T, Denzer V, Adam GA et al (2016) Dimensional tolerances for additive manufacturing: experimental investigation for fused deposition modeling. Proc CIRP 43:286–291CrossRef
25.
Rupal BS, Mostafa KG, Wang Y et al (2019) A Reverse CAD approach for estimating geometric and mechanical behavior of FDM printed parts. Proc Manuf 34:535–544
26.
Pennington RC, Hoekstra NL, Newcomer JL (2005) Significant factors in the dimensional accuracy of fused deposition modelling. Proc Inst Mech Eng Part E J Process Mech Eng 219(1):89–92CrossRef
27.
Mago J, Kumar R, Agrawal R, Singh A, Srivastava V (2020) Modeling of linear shrinkage in PLA parts fabricated by 3D printing using TOPSIS method. In: Shunmugam M, Kanthababu M (eds) Advances in additive manufacturing and joining. Lecture notes on multidisciplinary industrial engineering. Springer, Singapore
28.
Murugan R, Mitilesh RN, Singamneni S (2019) Influence of process parameters on the mechanical behaviour and processing time of 3D printing. Int J Mod Manuf Technol 1(1):21–27
29.
Dey A, Yodo N (2019) A systematic survey of FDM process parameter optimization and their influence on part characteristics. J Manuf Mater Process 3(3):64
30.
Nancharaiah TRDRV, Raju DR, Raju VR (2010) An experimental investigation on surface quality and dimensional accuracy of FDM components. Int J Emerg Technol 1(2):106–111
31.
Chung Wang C, Lin T, Hu S (2007) Optimizing the rapid prototyping process by integrating the Taguchi method with the Gray relational analysis. Rapid Prototyp J 13(5):304–315CrossRef
32.
Sood AK, Ohdar RK, Mahapatra SS (2009) Improving dimensional accuracy of fused deposition modelling processed part using grey Taguchi method. Mater Des 30(10):4243–4252CrossRef
33.
Zhang JW, Peng AH (2012) Process-parameter optimization for fused deposition modeling based on Taguchi method. Adv Mater Res 538:444–447CrossRef
34.
Percoco G, Galantucci LM, Lavecchia F (2011) Validation study of an analytical model of FDM accuracy. DAAAM International, Vienna, pp 585–592
35.
Rupal BS, Ramadass K, Qureshi AJ (2020) Investigating the effect of motor micro-stepping on the geometric tolerances of fused filament fabrication printed parts. Proc CIRP 92:9–14CrossRef
36.
Nuñez PJ, Rivas A, García-Plaza E et al (2015) Dimensional and surface texture characterization in fused deposition modelling (FDM) with ABS plus. Proc Eng 132:856–863CrossRef
37.
Jozić S, Bajić D, Celent L (2015) Application of compressed cold air cooling: achieving multiple performance characteristics in end milling process. J Clean Prod 100:325–332CrossRef
Metadata
Title
Studies on the effect of part geometry and process parameter on the dimensional deviation of additive manufactured part using ABS material
Authors
M. Jayashuriya
S. Gautam
A. Nithish Aravinth
G. Vasanth
Ramu Murugan
Publication date
18-04-2022
Publisher
Springer International Publishing
Published in
Progress in Additive Manufacturing / Issue 6/2022
Print ISSN: 2363-9512
Electronic ISSN: 2363-9520
DOI
https://doi.org/10.1007/s40964-022-00292-9

Other articles of this Issue 6/2022

Progress in Additive Manufacturing 6/2022 Go to the issue

Full Research Article

Relationship between microstructure, mechanical and magnetic properties of pure iron produced by laser powder bed fusion (L-PBF) in the as-built and stress relieved conditions

Full Research Article

Capability to detect and localize typical defects of laser powder bed fusion (L-PBF) process: an experimental investigation with different non-destructive techniques

Review Article

Corrosion of nickel-based alloys fabricated through additive manufacturing: a review

Full Research Article

Prediction modeling and parameters’ optimization of gas–powder flow convergence in coaxial powder feeding nozzles based on CFD–DEM simulation

Full Research Article

Global local modeling of melt pool dynamics and bead formation in laser bed powder fusion additive manufacturing using a multi-physics thermo-fluid simulation

Full Research Article

Multimodal freezing system for cryogenic 3D printing

Premium Partners

    Image Credits