Top

The International Journal of Advanced Manufacturing Technology

Published in:

29-07-2019 | ORIGINAL ARTICLE

Study effects on diamond concentration of CuSnFeNi/diamond composite on grinding WC

Authors: Jianwu Yu, Liang Huang, Hong Luo, Yang Hai

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-8/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

There are still some challenges to use metal matrix composites reinforced with diamond particles in grinding field because it is difficult to find a suitable metal matrix to balance the mechanical properties and grinding performance. In order to solve this problem, CuSnFeSn/diamond composites were fabricated by introducing hybrid microwave sintering with diamond concentration ranging from 40 to 70%. The microstructure, physical and mechanical properties, and critical grinding performance were investigated. Best balance of mechanical properties and grinding surface roughness occurred when the diamond concentration is 60%. It holds a hardness of 98.5 ± 0.5HRB, a flexural strength of 266.98 ± 15.6 MPa, an elastic modulus 46.62 ± 8.48GPa, and WC sample surface roughness Ra14.92 ± 2.92 nm. The grinding experiment results reveal that there are three wear modes in the processing, which are adhesive wear, plastic deformation, and sliding friction.

previous article Tooling design–related spatial deformation behaviors and crystallographic texture evolution of high-strength Ti-3Al-2.5V tube in cold pilgering

next article Parameter analysis of thermal behavior during laser melting of Ti-6Al-4V alloy powder

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Bastwros M, Kim G-Y, Zhu C, Zhang K, Wang S, Tang X, Wang X (2014) Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering. Compos Part B 60:111–118. https://doi.org/10.1016/j.compositesb.2013.12.043 CrossRef

Wu SQ, Wang HZ, Tjong SC (1996) Mechanical and wear behavior of an Al/Si alloy metal-matrix composite reinforced with aluminosilicate fiber. Compos Sci Technol 56(11):1261–1270. https://doi.org/10.1016/S0266-3538(96)00085-1 CrossRef

Tjong SC (2013) Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets. Mater Sci Eng R-Rep 74(10):281–350. https://doi.org/10.1016/j.mser.2013.08.001 CrossRef

Miracle DB (2005) Metal matrix composites – from science to technological significance. Compos Sci Technol 65(15):2526–2540. https://doi.org/10.1016/j.compscitech.2005.05.027 CrossRef

Bakshi SR, Agarwal A (2011) An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon 49(2):533–544. https://doi.org/10.1016/j.carbon.2010.09.054 CrossRef

Esawi AMK, Farag MM (2007) Carbon nanotube reinforced composites: potential and current challenges. Mater Design 28(9):2394–2401. https://doi.org/10.1016/j.matdes.2006.09.022 CrossRef

Kamalizadeh S, Niknam SA, Asgari A, Balazinski M (2019) Tool wear characterization in high-speed milling of titanium metal matrix composites. Int J Adv Manuf Technol 100(9):2901–2913. https://doi.org/10.1007/s00170-018-2651-0 CrossRef

Kwon H, Estili M, Takagi K, Miyazaki T, Kawasaki A (2009) Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites. Carbon 47(3):570–577. https://doi.org/10.1016/j.carbon.2008.10.041 CrossRef

Jiang L, Li Z, Fan G, Cao L, Zhang D (2012) The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution. Carbon 50(5):1993–1998. https://doi.org/10.1016/j.carbon.2011.12.057 CrossRef

10.

Matli P, Shakoor R, Amer Mohamed A, Gupta M (2016) Microwave rapid sintering of Al-metal matrix composites: a review on the effect of reinforcements, microstructure and mechanical properties. Metals 6(7):143CrossRef

11.

Pérez-Bustamante R, Pérez-Bustamante F, Estrada-Guel I, Licea-Jiménez L, Miki-Yoshida M, Martínez-Sánchez R (2013) Effect of milling time and CNT concentration on hardness of CNT/Al2024 composites produced by mechanical alloying. Mater Charact 75:13–19. https://doi.org/10.1016/j.matchar.2012.09.005 CrossRef

12.

Xiao Y, Xu F, Dong B, Liu W, Hu X (2017) Discussion on the local magnetic force between reversely magnetized micro metal particles in the microwave sintering process. Metals 7(2):47CrossRef

13.

Nicholls CJ, Boswell B, Davies IJ, Islam MN (2017) Review of machining metal matrix composites. Int J Adv Manuf Technol 90(9–12):2429–2441. https://doi.org/10.1007/s00170-016-9558-4 CrossRef

14.

Gul F, Acilar M (2004) Effect of the reinforcement volume fraction on the dry sliding wear behaviour of Al-10Si/SiCp composites produced by vacuum infiltration technique. Compos Sci Technol 64(13–14):1959–1970. https://doi.org/10.1016/j.compscitech.2004.02.013 CrossRef

15.

Anand K, Kishore (1983) On the wear of aluminium-corundum composites. Wear 85:163–169. https://doi.org/10.1016/0043-1648(83)90060-1 CrossRef

16.

Miranda G, Ferreira P, Buciumeanu M, Cabral A, Fredel M, Silva FS, Henriques B (2017) Microstructure, mechanical and wear behaviors of hot-pressed copper-nickel-based materials for diamond cutting tools. J Mater Eng Perform 26(8):4046–4055. https://doi.org/10.1007/s11665-017-2819-z CrossRef

17.

Wang L, Guo S, Gao J, Yang L, Hu T, Peng J, Hou M, Jiang C (2017) Microwave sintering behavior of FeCuCo based metallic powder for diamond alloy tool bit. J Alloy Compd 727:94–99. https://doi.org/10.1016/j.jallcom.2017.08.132 CrossRef

18.

Zhang Q, Wu GH, Chen GQ, Jiang LT, Luan BF (2003) The thermal expansion and mechanical properties of high reinforcement content SiCp/Al composites fabricated by squeeze casting technology. Composites Part a-Applied Science and Manufacturing 34(11):1023–1027. https://doi.org/10.1016/s1359-835x(03)00253-7 CrossRef

19.

Wang ZW, Song M, Sun C, He YH (2011) Effects of particle size and distribution on the mechanical properties of SiC reinforced Al-cu alloy composites. Mater Scie Eng a-Struct Mater Prop Microstruct Process 528(3):1131–1137. https://doi.org/10.1016/j.msea.2010.11.028 CrossRef

20.

Karamis MB, Cerit AA, Selcuk B, Nair F (2012) The effects of different ceramics size and volume fraction on wear behavior of Al matrix composites (for automobile cam material). Wear 289:73–81. https://doi.org/10.1016/j.wear.2012.04.012 CrossRef

21.

Chen J, Bao C, Ma Y, Chen Z (2017) Distribution control of AlN particles in Mg-Al/AlN composites. J Alloy Compd 695:162–170. https://doi.org/10.1016/J.JALLCOM.2016.10.190 CrossRef

22.

Liu Y, Fang Y, Liu X, Wang X, Yang B (2017) Mussel-inspired modification of carbon fiber via polyethyleneimine/polydopamine co-deposition for the improved interfacial adhesion. Compos Sci Technol 151:164–173. https://doi.org/10.1016/J.COMPSCITECH.2017.08.008 CrossRef

23.

Nicholson ED, Baker TW, Redman SA, Kalaugher E, Rosser KN, Everitt NM, Ashfold MNR, Partridge PG (1996) Young’s modulus of diamond-coated fibres and wires. Diam Relat Mater 5:658–663. https://doi.org/10.1016/0925-9635(95)00361-4 CrossRef

24.

Medina-Esquivel RA, Vales-Pinzon C, Quiñones-Weiss G, Zambrano-Arjona MA, Mendez-Gamboa JA, Cab C, Alvarado-Gil JJ (2015) Thermal conductivity of a diamond magnetite composite fluid under the effect of a uniform magnetic field. Diam Relat Mater 53:45–51. https://doi.org/10.1016/J.DIAMOND.2015.01.008 CrossRef

25.

Maniere C, Zahrah T, Olevsky EA (2017) Inherent heating instability of direct microwave sintering process: sample analysis for porous 3Y-ZrO2. Scripta Mater 128:49–52. https://doi.org/10.1016/j.scriptamat.2016.10.008 CrossRef

26.

Roy R, Agrawal D, Jiping C, Gedevanishvili S (1999) Full sintering of powdered-metal bodies in a microwave field. Nature 399(6737):668–670. https://doi.org/10.1038/21390 CrossRef

27.

Zhang Y, Cheng Y, Hu HP, Yin ZB (2017) Experimental study on cutting performance of microwave sintered Ti(C, N)/Al2O3 cermet tool in the dry machining of hardened steel. Int J Adv Manuf Technol 91(9–12):3933–3941. https://doi.org/10.1007/s00170-017-0062-2 CrossRef

28.

Oghbaei M, Mirzaee O (2010) Microwave versus conventional sintering: a review of fundamentals, advantages and applications. J Alloy Compd 494(1–2):175–189. https://doi.org/10.1016/j.jallcom.2010.01.068 CrossRef

29.

Shi J, Cheng Z, Gelin JC, Barriere T, Liu B (2017) Sintering of 17-4PH stainless steel powder assisted by microwave and the gradient of mechanical properties in the sintered body. Int J Adv Manuf Technol 91(5–8):2895–2906. https://doi.org/10.1007/s00170-016-9960-y CrossRef

30.

Chandrakanth RG, Rajkumar K, Aravindan S (2010) Fabrication of copper-TiC-graphite hybrid metal matrix composites through microwave processing. Int J Adv Manuf Technol 48(5–8):645–653. https://doi.org/10.1007/s00170-009-2474-0 CrossRef

31.

Abedinzadeh R (2018) Study on the densification behavior of aluminum powders using microwave hot pressing process. Int J Adv Manuf Technol 97(5):1913–1929. https://doi.org/10.1007/s00170-018-1867-3 CrossRef

32.

Li Y, Cheng L, Zhou J (2018) Curing multidirectional carbon fiber reinforced polymer composites with indirect microwave heating. Int J Adv Manuf Technol 97(1):1137–1147. https://doi.org/10.1007/s00170-018-1974-1 CrossRef

33.

Fernandez CP, Zabotto FL, Garcia D, Kiminami RHGA (2016) In situ sol gel co-synthesis under controlled pH and microwave sintering of PZT/CoFe2O4 magnetoelectric composite ceramics. Ceram Int 42(2):3239–3249. https://doi.org/10.1016/j.ceramint.2015.10.115 CrossRef

34.

Khot SS, Shinde NS, Basavaiah N, Watawe SC, Vaidya MM (2015) Magnetic properties of LiZnCu ferrite synthesized by the microwave sintering method. J Magn Magn Mater 374:182–186. https://doi.org/10.1016/j.jmmm.2014.08.039 CrossRef

35.

Ertugrul O, Park HS, Onel K, Willert-Porada M (2014) Effect of particle size and heating rate in microwave sintering of 316L stainless steel. Powder Technol 253:703–709. https://doi.org/10.1016/j.powtec.2013.12.043 CrossRef

36.

Hassan MN, Mahmoud MM, Link G, Abd El-Fattah A, Kandil S (2016) Sintering of naturally derived hydroxyapatite using high frequency microwave processing. J Alloy Compd 682:107–114. https://doi.org/10.1016/j.jallcom.2016.04.266 CrossRef

37.

Tun KS, Gupta M (2009) Development of magnesium/(yttria plus nickel) hybrid nanocomposites using hybrid microwave sintering: microstructure and tensile properties. J Alloy Compd 487(1–2):76–82. https://doi.org/10.1016/j.jallcom.2009.07.117 CrossRef

38.

Tarat A, Nettle CJ, Bryant DTJ, Jones DR, Penny MW, Brown RA, Majitha R, Meissner KE, Maffeis TGG (2014) Microwave-assisted synthesis of layered basic zinc acetate nanosheets and their thermal decomposition into nanocrystalline ZnO. Nanoscale Res Lett 9:Artn 11. https://doi.org/10.1186/1556-276x-9-11 CrossRef

39.

Reddy MP, Ubaid F, Shakoor RA, Parande G, Manakari V, Mohamed AMA, Gupta M (2017) Effect of reinforcement concentration on the properties of hot extruded Al-Al2O3 composites synthesized through microwave sintering process. Mater Sci Eng A 696:60–69. https://doi.org/10.1016/j.msea.2017.04.064 CrossRef

40.

Moya JS, Lopez-Esteban S, Pecharroman C (2007) The challenge of ceramic/metal microcomposites and nanocomposites. Prog Mater Sci 52(7):1017–1090. https://doi.org/10.1016/j.pmatsci.2006.09.003 CrossRef

41.

He BB, Hu B, Yen HW, Cheng GJ, Wang ZK, Luo HW, Huang MX (2017) High dislocation density-induced large ductility in deformed and partitioned steels. Science 357(6355):1029–1032. https://doi.org/10.1126/science.aan0177 CrossRef

42.

Kim CS, Cho K, Manjili MH, Nezafati M (2017) Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs). J Mater Sci 52(23):13319–13349. https://doi.org/10.1007/s10853-017-1378-x CrossRef

43.

Rahimian M, Ehsani N, Parvin N, Baharvandi HR (2009) The effect of particle size, sintering temperature and sintering time on the properties of Al-Al2O3 composites, made by powder metallurgy. J Mater Process Technol 209(14):5387–5393. https://doi.org/10.1016/j.jmatprotec.2009.04.007 CrossRef

44.

Krause H, Tackenberg W (1980) The influence of hardness difference on the frictional and wear behaviour of steel/copper alloy pairs in plane sliding friction under mixed friction conditions. Wear 64:291–302. https://doi.org/10.1016/0043-1648(80)90135-0 CrossRef

45.

So H, Yu DS, Chuang CY (2002) Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steel. Wear 253:1004–1015. https://doi.org/10.1016/S0043-1648(02)00230-2 CrossRef

46.

Mueller S, Wirtz C, Trauth D, Klocke F (2017) Plastic deformability at micro-scale of fiber-reinforced ceramics with porous matrix during grinding. Procedia Engineering 207:119–124. https://doi.org/10.1016/J.PROENG.2017.10.748 CrossRef

Title: Study effects on diamond concentration of CuSnFeNi/diamond composite on grinding WC
Authors: Jianwu Yu
Liang Huang
Hong Luo
Yang Hai
Publication date: 29-07-2019
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-8/2019
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04033-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-8/2019

Self-supporting overhang structures produced by additive manufacturing through electron beam melting

Residual stress prediction in ultrasonic vibration–assisted milling

Computational fluid dynamics model for thickness and uniformity prediction of coating layer in slot-die process

Processing parameter and transient effects on melt pool geometry in additive manufacturing of Invar 36

Effect of severe shot peening on the fatigue life of the laser-cladded Inconel 718 specimens

Optimization of cutter orientation for multi-axis NC machining based on minimum energy consumption of motion axes

Premium Partners