Top

Journal of Materials Engineering and Performance

Published in:

01-11-2011

Study on In situ Synthesis of TiC Particle Reinforced Iron Matrix Composite

Authors: Qihong Cen, Yehua Jiang, Rong Zhou, Yunhua Xu, Jianbin Wang

Published in: Journal of Materials Engineering and Performance | Issue 8/2011

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A casting penetration technology combined with in situ synthesis is applied to produce a TiC particle reinforced iron matrix composite. The interface between reaction zone and matrix is in good quality and no defects are found. The TiC particles in the reaction zone are fine with the average size of 2-5 μm, which may be beneficial for the interface quality and reinforcing effect. Analysis shows the growth of TiC particles is mainly controlled by the diffusion of carbon atoms.

previous article Response of Materials During Sliding on Various Surface Textures

next article Microstructure and Mechanical Properties of 6063 Aluminum Alloy Brazed Joints with Al-Si-Cu-Ni-RE Filler Metal

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

C. Biseli, D.G. Morris, and N. Randall, Mechanical Alloying of High-Strength Copper Alloy Containing TiB₂ and Al₂O₃ Dispersoid Particles, Scr. Metall. Mater., 1994, 30, p 1327–1332CrossRef

S.J. Dong, Y. Zhou, Y.W. Shi, and B.H. Chang, Formation of a TiB₂-Reinforced Copper-Based Composite by Mechanical Alloying and Hot Pressing, Metall. Mater. Trans. A, 2002, 33A, p 1275–1280CrossRef

R.H. Palma, A.O. Sepulveda, R.G. Espinoza, A.P. Zuniga, M.J. Dianez, J.M. Criado, and M.J. Sayagues, High-Temperature Mechanical Behaviour of Cu-Ti-C, Cu-Al and Cu-Ti-Al-C Alloys Obtained by Reaction Milling, Mater. Sci. Eng. A, 2004, 384, p 262–269CrossRef

M.T. Marques, V. Livramento, J.B. Correia, A. Almeida, and R. Vilar, Study of Early Stages of Cu-NbC Nanocomposite Synthesis, Mater. Sci. Eng. A, 2005, 399, p 282–386CrossRef

L. Liu, F. Padella, W. Guo, and M. Magini, Solid State Reactions Induced by Mechanical Alloying in Metal-Silicon (Metal=Mo, Nb) Systems, Acta Metall. Mater., 1995, 43, p 3755–3761CrossRef

G.J. Fan, M.X. Quan, Z.Q. Hu, J. Eckert, and L. Schultz, In situ Explosive Formation of NbSi₂-Based Nanocomposites by Mechanical Alloying, Scr. Mater., 1999, 41, p 1147–1151CrossRef

D.D. Gu, Z.Y. Wang, Y.F. Shen, Q. Li, and Y.F. Li, In situ TiC Particle Reinforced Ti-Al Matrix Composites: Powder Preparation by Mechanical Alloying and Selective Laser Melting Behavior, Appl. Surf. Sci., 2009, 255, p 9230–9240CrossRef

S.W. Huang, M. Samandi, and M. Brandt, Abrasive Wear Performance and Microstructure of Laser Clad WC/Ni Layers, Wear, 2004, 256, p 1095–1105CrossRef

X.H. Wang, M. Zhang, Z.D. Zou, S.L. Song, F. Han, and S.Y. Qu, In situ Production of Fe-TiC Surface Composite Coatings by Tungsten-Inert Gas Heat Source, Surf. Coat. Technol., 2006, 200, p 6117–6122CrossRef

10.

J. Lee, K. Euh, J.C. Oh, and S. Lee, Microstructure and Hardness Improvement of TiC/Stainless Steel Surface Composites Fabricated by High-Energy Electron Beam Irradiation, Mater. Sci. Eng. A, 2002, 233, p 201–259

11.

P. Persson, A.E.W. Jarfors, and S. Savage, Self-Propagating High-Temperature Synthesis and Liquid-Phase Sintering of TiC/Fe Composites, J. Mater. Process. Technol., 2002, 127, p 131–139CrossRef

12.

C. Raghunath, M.S. Bhat, and P.K. Rohagi, In situ Technique for Synthesizing Fe-TiC Composites, Scr. Metall. Mater., 1995, 32, p 577–582CrossRef

13.

Q.F. Guan, Q.C. Jiang, Y.Q. Zhao, and C.H. Liu, In situ Production of Fe-TiC Composites by Self-Propagative High-Temperature Synthesis Reaction in Liquid Iron Alloy, ISIJ Int., 2002, 42, p 673–675CrossRef

14.

H. Berns and B. Wewers, Development of an Abrasion Resistant Steel Composite with in situ TiC Particles, Wear, 2001, 251, p 1386–1395CrossRef

15.

D.L. Ye and J.H. Hu, Thermodynamic Databook of Practical Inorganics, Metallurgical Industry Press, Beijing, 2002

16.

K. Aigner, W. Lengauer, and P. Ettmayer, Interactions in Iron-Based Cermet Systems, J. Alloys Compd., 1997, 262–263, p 486–491CrossRef

Title: Study on In situ Synthesis of TiC Particle Reinforced Iron Matrix Composite
Authors: Qihong Cen
Yehua Jiang
Rong Zhou
Yunhua Xu
Jianbin Wang
Publication date: 01-11-2011
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 8/2011
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-010-9793-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 8/2011

Editorial

Filament-Level Modeling of Aramid-Based High-Performance Structural Materials

Design of Experiments Study of Hydroxyapatite Synthesis for Orthopaedic Application Using Fractional Factorial Design

Comparative Study of Several Energy Dissipating Devices

The Optimization of Interlamellar Spacing in a Nanopearlitic Lead-Patented Hypoeutectoid Steel Wire

Finite Element Analysis of the Deformation Distribution During Multi-Pass Rotary-Die ECAP

Premium Partners