Top

Published in:

2017 | OriginalPaper | Chapter

7. Styrene–Butadiene Rubber-Based Nanoblends (SBR-nB): Preparation, Characterization and Applications

Authors : Aniruddha Chatterjee, Prashant S. Khobragade

Published in: Rubber Nano Blends

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Styrene–butadiene rubber (SBR) blends become versatile materials of polymer industry today, since their properties can satisfy a wide spectrum of customer demands. In this chapter, the fundamentals of blending, reasons for blending, ideas about the preparation, properties, application, and characterization of SBR-based nanoblends are presented. It also deals with the recent advances, new challenges, and opportunities of these SBR-based blends. A detailed review of the recent works on SBR-based nanoblended systems with their scope and objectives has been included.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Polybutadiene Rubber-Based Nanoblends (PBR-nB): Preparation, Characterization and Applications

next chapter Polychloroprene Rubber-Based Nanoblends: Preparation, Characterization and Applications

Shanks RA, Kong I (2013) General purpose elastomers: structure, chemistry, physics and performance. In: Advances in elastomers I. Advanced structured materials vol 11. Springer, Berlin, Heidelberg. doi:10.1007/978-3-642-20925-3_2

Deepalekshmi R, Visakh PM, Mathew AP, Chandra AK, Thomas S (2013) Advances in elastomers I. Advanced structured materials, vol 11. Springer, Berlin, Heidelberg. doi:10.1007/978-3-642-20925-3_1

Varghese S, Karger-Kocsis J (2005) Layered silicate/rubber nanocomposites via latex and solution intercalations, 77–90. In: Friedrich K, Fakirov S, Zhang Z (eds) Polymer composites from Nano- to macro-scale 1–328. doi:10.1007/b137162

Apostolo M, Triulzi F (2004) Properties of fluoroelastomer/semicrystalline perfluoropolymer nano-blends. J Fluor Chem 125:303–314CrossRef

Hu GH, Cartier H (1999) Reactive extrusion: toward nano blends. Macromolecules 32:4713–4718CrossRef

Noguchi F, Akabori K, Yamamoto Y, Kawazura T, Kawahara1 S (2009) Tear energy and strain-induced crystallization of natural rubber/styrene-butadiene rubber blend. J Phys Conf Ser 184:1742–6596

Bendjaouahdou C, Bensaad S (2013) The effects of organoclay on the morphology and balance properties of an immiscible polypropylene/natural rubber blend. Energy Procedia 36:574–590CrossRef

Visakh PM, Mathew AP, Thomas S (2013) Natural polymers: their blends, composites and nanocomposites: state of art, new challenges and opportunities. In: Advances in natural polymers. Advanced structured materials, vol 18. Springer, Berlin, Heidelberg. doi:10.1007/978-3-642-20940-6_1

Mitra S, Chattopadhyay S, Bhowmick AK (2010) Preparation and characterization of elastomer-based nanocomposite gels using an unique latex blending technique. J Appl Polym Sci 118:81–90CrossRef

10.

Le HH, Sriharish MN, Henning S, Klehm J, Menzel M, Frank W, Wießner S, Das A, Stöckelhuber K-W, Heinrich G, Radusch HJ (2014) Dispersion and distribution of carbon nanotubes in ternary rubber blends. Compos Sci Technol 90:180–186CrossRef

11.

Rahmatpour A, Abdollahi M, Shojaee M (2008) Structure and mechanical properties of 50/50 NR/SBR blend/pristine clay nanocomposites. J Macromol Sci Part B Phys 47(3):523–531CrossRef

12.

Ahmed JK, Al-maamori MH, Ali HM (2015) Effect of nano silica on the mechanical properties of styrene-butadiene rubber (SBR) composite. Int J Mater Sci Appl 4(2-1):15–20

13.

Cao X, Xu C, Liu Y (2013) Yukun ChenPreparation and properties of carboxylated styrene-butadiene rubber/cellulose nanocrystals composites. Carbo Polym 92:69–76

14.

Hosseini SM, Madaeni SS, Khodabakhshi AR (2010) Preparation and characterization of PC/SBR heterogeneous cation exchange membrane filled with carbon nano-tubes. J Membr Sci 362:550–559CrossRef

15.

Prasertsri S, Lagarde F, Rattanasom N, Sirisinha C, Daniel P (2013) Raman spectroscopy and thermal analysis of gum and silica-filled NR/SBR blends prepared from latex system. Polym Testing 32:852–861

16.

Pal K, Rajasekar R, Kang DJ, Zhang ZX, Pal SK, Das CK, Kim JK (2010) Effect of fillers on natural rubber/high styrene rubber blends with nano silica: morphology and wear. Mater Des 31:677–686

17.

Stephen R, Ranganathaiah C, Varghese S, Joseph K, Thomas S (2006) Gas transport through nano and micro composites of natural rubber (NR) and their blends with carboxylated styrene butadiene rubber (XSBR) latex membranes. Polymer 47:858–870CrossRef

18.

Wu Y-P, Ma Y, Wang YQ, Zhang LQ (2004) Effects of characteristics of rubber, mixing and vulcanization on the structure and properties of rubber/clay nanocomposites by melt blending. Macromol Mater Eng 289:890–894CrossRef

19.

Durandish M, Alipourb A (2013) Investigation into morphology, microstructure and properties of SBR/EPDM/ORGANO montmorillonite nanocomposites. Chin J Polym Sci 31(4):660–669CrossRef

20.

Arantes TM, Leao KV, Ines M, Tavares B, Ferreira AG, Longo E, Camargo ER (2009) NMR study of styrene-butadiene rubber (SBR) and TiO₂ nanocomposites. Polym Testing 28:490–494CrossRef

21.

Tancharernrat T, Rempel GL, Prasassarakich P (2014) Preparation of styrene butadiene copolymer–silica nanocomposites via differential microemulsion polymerization and NR/SBR–SiO₂ membranes for pervaporation of water–ethanol mixtures. Chem Eng J 258:290–300CrossRef

22.

Pashaeil S, Sadaghini AS, Siddaramaiah, Reddy GR (2014) Studies on ginger powder and crysnanoclay filled acrylonitrile-butadiene rubber/styrene butadiene rubber (NBR/SBR) green composites. Int J Chem Tech Res 6(4):2598–2610

23.

Wang W, Fu M, Qu B (2004) Mechanical properties and structural characteristics of PP/PP-g-SBR nanocomposites prepared by dynamical photografting. Polym Adv Technol 15:467–471CrossRef

24.

Drazkowski DB, Lee A, Haddad TS, Cookson DJ (2006) Chemical substituent effects on morphological transitions in styrene-butadiene-styrene triblock copolymer grafted with polyhedral oligomeric silsesquioxanes. Macromolecules 39:1854–1863CrossRef

25.

Stephen R, Alex R, Cherian T, Varghese S, Joseph K, Thomas S (2006) Rheological behavior of nanocomposites of natural rubber and carboxylated styrene butadiene rubber latices and their blends. J Appl Polym Sci 101:2355–2362CrossRef

26.

Zarei M, Naderi G, Bakhshandeh GR, Shokoohi S (2013) Ternary elastomer nanocomposites based on NR/BR/SBR: effect of nanoclay composition. Appl Polym Sci. doi:10.1002/APP.37687

27.

Chen WJ, Gu J, Xu SH (2014) Exploring nanocrystalline cellulose as a green alternative of carbon black in natural rubber/butadiene rubber/styrene-butadiene rubber blends. Expr Polym Lett 8(9):659–668CrossRef

28.

Le HH, Parsekar M, Ilisch S, Henning S, Das A, Stockelhuber KW, Beiner M, Anh Ho C, Adhikari R, Wiener S, Heinrich G, Radusch HJ (2013) Effect of non-rubber components of NR on the carbon nanotube (CNT) localization in SBR/NR blends. Macromol Mater Eng. doi:10.1002/mame.201300254

29.

Le HH, Sriharish MN, Henning S, Klehm J, Menzel M, Frank W, Wiener S, Das A, Stöckelhuber KW, Heinrich G, Radusch HJ (2014) Dispersion and distribution of carbon nanotubes in ternary rubber blends. Compos Sci Technol 90:180–186CrossRef

30.

Kawazoe M, Ishida H (2008) A new concept for nano particle distribution in SBR/NBR blend solution and films via molecular confinement. Macromolecules 41:2931–2937CrossRef

31.

Schopp S, Thomann R, Ratzsch KF, Kerling S, Altstadt V, Mulhaupt R (2014) Functionalized graphene and carbon materials as components of styrene-butadiene rubber nanocomposites prepared by aqueous dispersion blending. Macromol Mater Eng 299:319–329CrossRef

32.

Das A, Stockelhuber KW, Jurk R, Saphiannikova M, Fritzsche J, Lorenz H, Kluppel M, Heinrich G (2008) Modified and unmodified multiwalled carbon nanotubes in high performance solution-styrene–butadiene and butadiene rubber blends. Polymer 49:5276–5283CrossRef

33.

Lorenz H, Fritzsche J, Das A, Stöckelhuber KW, Jurk R, Heinrich G, Klüppel M (2009) Advanced elastomer nano-composites based on CNT-hybrid filler systems. Compos Sci Technol 69:2135–2143CrossRef

34.

35.

Mohamed RM (2013) Radiation induced modification of NBR and SBR montmorillonite nanocomposites. J Ind Eng Chem 19:80–86

Title: Styrene–Butadiene Rubber-Based Nanoblends (SBR-nB): Preparation, Characterization and Applications
Authors: Aniruddha Chatterjee
Prashant S. Khobragade
Publisher: Springer International Publishing
Book: Rubber Nano Blends
Print ISBN: 978-3-319-48718-2

Electronic ISBN: 978-3-319-48720-5

Copyright Year: 2017
DOI: https://doi.org/10.1007/978-3-319-48720-5_7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners